Abstract
The devastating effects of oil spills on the ecosystems must be minimized by looking for effective solutions which offer a fast response to them. This work aimed at characterizing the oil-absorption capacity of flexible low-density open-cell foams based on polyolefins with different levels of tortuosity by comparing it to the one displayed by a commercial flexible open-cell polyurethane foam. The results showed that the tortuosity played a critical role in this property, absorbing the open-cell foams with low tortuosity up to 3 times more oil than the ones with high tortuosity. Oil absorptions as considerable as 43 g of oil per gram of foam were obtained, absorbing these foams up to 3.76 times more oil than the open-cell PU foam used as the reference. The hydrophobic character of these foams has also been characterized obtaining negligible water absorptions for the open-cell polyolefin-based materials, showing besides excellent oil–water selectivity. Finally, the reusability of the foams has been analyzed by using two methodologies: mechanical tests at low strain rates and by performing successive oil-absorption tests. The results indicated that open-cell EVA-based foams can be reused at least 50 times, whereas the open-cell LDPE-based foams tended to collapse. This study has proven that open-cell EVA-based foams with low tortuosity can be a potential alternative to be used in oil spill remediation.
Similar content being viewed by others
References
Adebajo MO, Frost RL, Kloprogge JT, Carmody O, Kokot S (2003) Porous materials for oil spill cleanup: a review of synthesis and absorbing properties. J Porous Mater 10:159–170. https://doi.org/10.1023/A:1027484117065
Allen AA, Ferek RJ (1993) Advantages and disadvantages of burning spilled oil. Int Oil Spill Proc 1:765–772. https://doi.org/10.7901/2169-3358-1993-1-765
Calcagnile P, Fragouli D, Bayer IS, Anyfantis GC, Martiradonna L, Cozzoli PD, Cingolani R, Athanassiou A (2012) Magnetically driven floating foams for the removal of oil contaminants from water. ACS Nano 6:5413–5419. https://doi.org/10.1021/nn3012948
Choi HM, Cloud RM (1992) Natural sorbents in oil spill cleanup. Environ Sci Technol 26:772–776. https://doi.org/10.1021/es00028a016
Cunningham A, Hilyard NC (1994) Low density cellular plastics: physical basis of behavior. Chapman and Hall, London
Eaves D (2004) Handbook of polymer foams. Rapra Technology Limited, Shrewsbury
Gibson LJ, Ashby MF (1995) Cellular solids: structure and properties, 2nd edn. Pergamon, Oxford
Hamdi O, Mighri F, Rodrigue D (2018) Optimization of the cellular morphology of biaxially stretched thin polyethylene foams produced by extrusion film blowing. Cell Polym 13:153–168. https://doi.org/10.1177/0262489318797517
ITOPF Ltd: “Oil Tanker Spill Statistics 2017” (London, United Kingdom). https://www.itopf.org/fileadmin/data/Photos/Statistics/Oil_Spill_Stats_2017_web.pdf. Accessed Jan 2018
Klempner D, Frisch KC (1992) Handbook of polymeric foams and foam technology. Hanser Publishers, Munich
Klempner D, Sendijarevic V (2004) Handbook of polymeric foams and foam technology, 2nd edn. Hanser Publishers, Munich
Kota KA, Kwon G, Choi W, Mabry JM, Tuteja A (2012) Hygro-responsive membranes for effective oil-water separation. Nat Commun 3:1025. https://doi.org/10.1038/ncomm2027
Lessard RR, DeMarco G (2000) The significance of oil spill dispersants. Spill Sci Technol B 6:59–68. https://doi.org/10.1016/S1353-2561(99)00061-4
Li H, Liu L, Yang F (2013) Oleophilic polyurethane foams for oil spill cleanup. Procedia Environ Sci 18:528–533. https://doi.org/10.1016/j.proenv.2013.04.071
Liu Y, Ma J, Wu T, Wang X, Huang G, Liu Y, Qiu H, Li Y, Wang W, Gao J (2013) Cost effective reduced graphene oxide coated polyurethane sponge as a highly efficient and reusable oil-absorbent. ACS Appl Mater Int 5:10018–10026. https://doi.org/10.1021/am4024252
Montagna PA, Baguley JG, Cooksey C, Hartwell I, Hyde LJ, Hyland JL, Kalke RD, Kracker LM, Reuscher Rhodes ACE (2013) Deep-sea benthic footprint of the deepwater horizon blowout. PLoS ONE 8:e70540. https://doi.org/10.1371/journal.pone.0070540
Pinto J, Athanassiou A, Fragouli D (2016) Effect of the porous structure of polymer foams on the remediation of oil spills. J Phys D Appl Phys 49:145601. https://doi.org/10.1088/0022-3727/49/14/145601
Pinto J, Heredia-Guerrero JA, Athanassiou A, Fragouli D (2017) Reusable nanocomposite-coated polyurethane foams for the remediation of oil spills. Int J Environ Sci Technol 14:2055–2066. https://doi.org/10.1007/s13762-017-1310-6
Pintor AMA, Ferreira CIA, Pereira JC, Correia P, Silva SP, Vilar VJP, Botelho CMS, Boaventura RAR (2012) Use of cork powder and granules for adsorption of pollutants: a review. Water Res 46:3152–3166. https://doi.org/10.1016/j.watres.2012.03.048
Rengasamy RS, Das D, Praba Karan C (2011) Study of oil sorption behavior of filled and structured fiber assemblies made from polypropylene, kapok and milkweed fibers. J Hazad Mater 186:526–532. https://doi.org/10.1016/j.jhazmat.2010.11.031
Rizvi A, Chu RKM, Lee JH, Park CB (2014) Superhydrophobic and oleophilic open-cell foams from fibrillar blends of polypropylene and polytetrafluoroethylene. ACS Appl Mater Int 6:21131–21140. https://doi.org/10.1021/am506006v
Rodriguez-Perez MA (2005) Crosslinked polyolefin foams: production, structure, properties and applications. Adv Polym Sci 184:97–126. https://doi.org/10.1007/b136244
Teas C, Kalligeros S, Zanikos F, Stournas S, Lois E, Anastopoulos G (2001) Investigation of the effectiveness of absorbent materials in oil spill clean up. Desalination 140:259–264. https://doi.org/10.1016/S0011-9164(01)00375-7
Wang CF, Lin SJ (2013) Robust superhydrophobic/superolephilic sponge for effective continuous absorption and expulsion of oil pollutants from water. ACS Appl Mater Int 5:8861–8864. https://doi.org/10.1021/am403266v
Wang P, Zou C, Zhong H (2012) The study of highly oil absorption polyurethane foam material and its application in the emergency disposal of hazardous chemicals. Adv Mater Res 518–523:847–853. https://doi.org/10.4028/www.scientific.net/AMR.518-523.847
Wang J, Zheng Y, Wang A (2013) Coated kapok fiber for removal of spilled oil. Mar Pollut Bull 69:91–96. https://doi.org/10.1016/j.marpolbul.2013.01.007
Wang S, Wang K, Pang Y, Li Y, Wu F, Wang S, Zheng W (2016) Open-cell propylene/polyolefin elastomer blend foams fabricated for reusable oil-sorption materials. J Appl Polym Sci 133:43812–43821. https://doi.org/10.1002/app.43812
Wen Q, Di J, Jiang L, Yu J, Xu R (2013) Zeolite-coated mesh film for efficient oil-water separation. Chem Sci 4:591–595. https://doi.org/10.1039/C2SC21772D
Xue Z, Cao Y, Liu N, Feng L, Jiang L (2014) Special wettable materials for oil/water separation. J Mater Chem A 2:2445–2460. https://doi.org/10.1039/C3TA13397D
Zhang F, Zhang WB, Shi Z, Wang D, Jin J, Jiang L (2013) Nanowire-haired inorganic membranes with superhydrophilicity and underwater ultralow adhesive superolephobicity for high efficiency oil/water separation. Adv Mater 25:4192–4198. https://doi.org/10.1002/adma.201301480
Zhou X, Zhang Z, Xu X, Guo F, Zhu X, Men X, Ge B (2013) Robust and durable superhydrophobic cotton fabrics for oil/water separation. ACS Appl Mater Int 5:7208–7214. https://doi.org/10.1021/am4015346
Zhu Q, Chu Y, Wang Z, Chen N, Lin L, Liu F, Pan Q (2013) Robust superhydrophobic polyurethane sponge as a highly reusable oil-absorption material. J Mater Chem A 1:5386–5393. https://doi.org/10.1039/C3TA00125C
Zhu Y, Wang D, Jiang L, Jin J (2014) Recent progress in developing advanced membranes for emulsified oil/water separation. NPG Asia Mater 6:e101. https://doi.org/10.1038/am.2014.23
Acknowledgements
Financial support from DI grant DI-15-07952 (E. Lopez-Gonzalez) from the Spanish Ministry of Economy, Industry, and Competitiveness and MINECO, FEDER, UE (MAT2015-69234-R) is gratefully acknowledged.
Author information
Authors and Affiliations
Corresponding author
Additional information
Editorial responsibility: M. Abbaspour.
Rights and permissions
About this article
Cite this article
Lopez-Gonzalez, E., Saiz-Arroyo, C. & Rodriguez-Perez, M.A. Low-density open-cell flexible polyolefin foams as efficient materials for oil absorption: influence of tortuosity on oil absorption. Int. J. Environ. Sci. Technol. 17, 1663–1674 (2020). https://doi.org/10.1007/s13762-019-02576-0
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s13762-019-02576-0