Abstract
In this paper, the effect of adding nanoparticles on the performance characteristics of diesel engine was investigated. Up to now, several metallic nanoadditives including cerium and aluminum have been applied in this area. However, the possibility of using some other metals or modification in the additive structures as well as improving or changing the basic fluid is among factors manifesting a broad scope of work in this area. For this purpose, the silver nanoparticles were used as additives to the net diesel fuel. The results are indicative of significant alteration in the engine power, oil temperature, and the proportion of the released pollutants. The presence of the metallic nanoparticles inside the combustion chamber augments the heat transfer to fuel and shortens the ignition delay through an acceleration of the burning process. Meanwhile, these particles can aid fuel particles further penetrate in the compressed air during the spraying stage. Having all of these features altogether will improve combustion and hence the unburned carbons and other pollutants will decrease. Based on these observations, the rate of CO and NOx would be reduced significantly up to 20.5 and 13 %, respectively, noting that the net diesel and HC would undergo the highest change (up to 28 %). The results also indicate a 3 % fuel consumption reduction accompanied with 6 % improvement in the engine power, utilizing nanoparticles in most cases.
Similar content being viewed by others
References
Allen C, Mittal G, Sung C, Toulson E, Lee T (2011) An aerosol rapid compression machine for studying energetic-nanoparticle-enhanced combustion of liquid fuels. Proc Combust Inst 33(2):3367–3374
Basha JS, Anand R (2010) Performance and emission characteristics of a DI compression ignition engine using carbon nanotubes blended diesel. Int J Adv Ther Sci Eng 1:67–76
Basha JS, Anand R (2011) An experimental study in a CI engine using nanoadditive blended water–diesel emulsion fuel. Int J Green Energy 8(3):332–348
Benson R, Whitehouse ND (1983) Internal combustion engines. Pergamon press, Oxford
Bertola A, Li R, Boulouchos K (2003) Influence of water-diesel fuel emulsions and EGR on combustion and exhaust emissions of heavy duty DI-diesel engines equipped with common-rail injection system. SAE Trans 112(4):2244–2260
Claus P, Hofmeister H (1999) Electron microscopy and catalytic study of silver catalysts: structure sensitivity of the hydrogenation of crotonaldehyde. J Phys Chem B 103(14):2766–2775
De Luca L, Galfetti L, Severini F, Meda L, Marra G, Vorozhtsov A, Sedoi V, Babuk V (2005) Burning of nano-aluminized composite rocket propellants. Combust Explos Shock Waves 41(6):680–692
Evans B, Favorito NA, Boyer E, Risha GA, Wehrman RB, Kuo KK (2004) Characterization of nano-sized energetic particle enhancement of solid-fuel burning rates in an X-ray transparent hybrid rocket engine. AIAA Paper 3821:40
Galfetti L, Deluca L, Severini F, Colombo G, Meda L, Marra G (2007) Pre and post-burning analysis of nano-aluminized solid rocket propellants. Aerosp Sci Technol 11(1):26–32
Gan Y, Qiao L (2011) Combustion characteristics of fuel droplets with addition of nano and micron-sized aluminum particles. Combust Flame 158(2):354–368
Gan Y, Lim YS, Qiao L (2012) Combustion of nanofluid fuels with the addition of boron and iron particles at dilute and dense concentrations. Combust Flame 159(4):1732–1740
Harbach J, Agosta V (1991) Effects of emulsified fuel on combustion in a four-stroke diesel engine 35(4):356–367
Ivanov GV, Tepper F (1997) ‘Activated’ aluminum as a stored energy source for propellants. Int J Energ Mater Chem Propuls 4:1–6
Jung H, Kittelson DB, Zachariah MR (2005) The influence of a cerium additive on ultrafine diesel particle emissions and kinetics of oxidation. Combust Flame 142(3):276–288
Kao M, Ting C, Lin B, Tsung T (2008) Aqueous aluminum nanofluid combustion in diesel fuel. J Test Eval 36(2):503
Kuo KK, Risha GA, Evans BJ, Boyer E (2004) Potential usage of energetic nano-sized powders for combustion and rocket propulsion. 800:3–14
Kvitek L, Robert P (2005) The preparation and application of silver nanoparticles. J Mater Sci 22:2461–2473
Li CH (2011) Experimental study of nanoadditives for biofuel combustion improvement. pp 1727–1734
Pivkina A, Ulyanova P, Frolov Y, Zavyalov S, Schoonman J (2004) Nanomaterials for heterogeneous combustion. Propellants Explos Pyrotech 29(1):39–48
Prucek R, Kv’itek L, Hrb’avc J (2004) Silver colloids-methods of preparation and utilization. Chemica 43:59
Sajith V, Sobhan C, Peterson G (2010) Experimental investigations on the effects of cerium oxide nanoparticle fuel additives on biodiesel. Adv Mech Eng 2010:6. doi:10.1155/2010/581407
Satge De Caro P, Mouloungui Z, Vaitilingom G, Berge JC (2001) Interest of combining an additive with diesel–ethanol blends for use in diesel engines. Fuel 80(4):565–574
Selvan V, Anand RB, Udayakumar M (2009) Effects of cerium oxide nanoparticle addition in diesel and diesel–biodiesel–ethanol blends on the performance and emission characteristics of a CI engine. J Eng Appl Sci 4(7):1819–6608
Solero G (2012) Experimental analysis of the influence of inert nano-additives upon combustion of diesel sprays. Nanosci Nanotechnol 2(4):129–133
Tyagi H, Phelan PE, Prasher R, Peck R, Lee T, Pacheco JR, Arentzen P (2008) Increased hot-plate ignition probability for nanoparticle-laden diesel fuel. Nano Lett 8(5):1410–1416
Van Devener B, Perez JPL, Jankovich J, Anderson SL (2009) Oxide-free, catalyst-coated, fuel-soluble, air-stable boron nanopowder as combined combustion catalyst and high energy density fuel. Energy Fuels 23(12):6111–6120
Wang H, Xu C, Wei Y, Zhao Z, Liu J (2012) Comparative study of nanometric Co-, Mn- and Fe-based Provskite-type complex oxide catalysts for the simultaneous elimination soot and NOx from diesel engine exhaust. Catal Today 184:288–300
Williams F (1997) Some aspects of metal particle combustion. Physical and chemical aspects of combustion: a tribute to Irvin Glassman. Gordon and Breach, Netherlands, p 267
Xiaolu L, Hongyan C, Zhiyong Z, Zhen H (2006) Study of combustion and emission characteristics of a diesel engine operated with dimethyl carbonate. Energy Convers Manag 47(11):1438–1448
Yang W, An H, Chou S, Vedharaji S, Vallinagam R, Balaji M, Mohammad F, Chua K (2013) Emulsion fuel with novel nano-organic additives for diesel engine application. Fuel 104:726–731
Yetter RA, Risha GA, Son SF (2009) Metal particle combustion and nanotechnology. Proc Combust Inst 32(2):1819–1838
Acknowledgments
Authors would like to thank the nanotechnology laboratories of Tehran and Urmia Universities and also Bioenergy Research Center of Tarbiat Modarres University for their help in conducting the experiments. Our sincere gratitude toward Prof. Farhadi and Dr. Ghobadian for their support related to the Nanotechnology and engine test sections of this paper. This work is financially supported by the Iran Nanotechnology Initiative Council (Grant Number 46680). In the end, the authors are thankful to the editor and the reviewers for their constructive comments.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Soukht Saraee, H., Jafarmadar, S., Taghavifar, H. et al. Reduction of emissions and fuel consumption in a compression ignition engine using nanoparticles. Int. J. Environ. Sci. Technol. 12, 2245–2252 (2015). https://doi.org/10.1007/s13762-015-0759-4
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s13762-015-0759-4