Abstract
In this study, a Life Cycle Cost (LCC) is integrated within a life cycle assessment (LCA) model to comprehensively evaluate the energy, environment, and economic impacts of the Jatropha biodiesel production in China. The total energy consumption of producing 1 ton of Jatropha biodiesel is 17566.16 MJ, in which fertilizer utilization and methanol production consume 78.14% and 18.65% of the overall energy consumption, respectively. The production of 1 ton of Jatropha biodiesel emits a number of pollutants, including 1184.52 kg of CO2, 5.86 kg of dust, 5.59 kg of NOx, 2.67 kg of SO2, 2.38 kg of CH4, and 1.05 kg of CO. By calculating and comparing their environmental impacts potentials, it was discovered that NOx and dust emissions during the fertilizer application, combustion of Jatropha shells, and methanol production urgently require improvement, as they contribute to serious global warming and particulate matter formation issues. LCC study shows that the cost of Jatropha biodiesel is 796.32 USD/ton, which is mostly contributed by Jatropha oil cost (44.37% of the total cost) and human input (26.70% of the total cost). Additional profits are generated by the combustion of Jatropha shells and glycerol by-product, which can compensate 16.76% of the cost of Jatropha biodiesel.
Graphical Abstract
![](http://media.springernature.com/lw685/springer-static/image/art%3A10.1007%2Fs13399-022-03614-7/MediaObjects/13399_2022_3614_Figa_HTML.png)
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
1 Introduction
The world energy consumption is rapidly growing with the continuous growth of the global population and economy [1, 2]. The utilization of conventional fossil fuels has been considered a major contributor to irreversible environmental deterioration, which imposed negative impacts on human health. Therefore, the development of renewable energy is not only necessary but also an urgent need to sustain the future energy demand [3, 4]. In recent years, biodiesel is gaining paramount interest as a promising alternative to replace current diesel, owing to its facile production process and superior fuel properties [5]. Compared to petroleum fuels, the combustion of biodiesel leads to over 90% reduction of total unburned hydrocarbons (HC) and a 75–90% decrease in polycyclic aromatic hydrocarbon (PAHs) [6]. Importantly, using biodiesel in transportation vehicles resulted in 78, 46.7, and 66.7% reductions in the net carbon dioxide emission, carbon monoxide, and particulate matters [7], respectively, which can effectively mitigate the global warming effect [8]. Besides, there are several other advantages that biodiesel can offer, including its higher energy return, engine compatibility, higher combustion efficiency, higher cetane number, lower sulfur, renewability, and biodegradability [9].
In the last decades, the biofuel production and consumption rapidly grew in China, according to the Medium and Long-term Development Plan for Renewable Energy issued by the National Development and Reform Commission on August 31, 2007 [10]. The information about the biodiesel industry in China in recent years is given in Table 1 [11]. The production of biodiesel in China is far smaller than that of Indonesia and the USA (7900 and 6500 million liters) in 2019 [12]. One of the most significant limitations for the further expansion of biodiesel in China is the availability of feedstock in China. Unlike bioethanol plants, the Chinese biodiesel production plants are often small-scaled and private owned [13], whose feedstocks are primarily relying on waste cooking oil or animal fat. Nevertheless, the prices for such feedstocks are not economic for biodiesel production, as they are also demanded for feed industry and other chemical processing [13]. In addition, the lack of recognized subsidies to promote biodiesel production and usage results in undermining the full capacity for biodiesel production. According to the US Energy Information Administration, the Chinese biodiesel refinery capacity use was only 30% [14]. To avoid food competition, inedible oil resources are gaining growing attention, including Jatropha curcas (Jatropha), Aza-rdirachta indica (neem), Hevea brasiliensis (rubber seed tree), P. pinnata (karanja or honge), Calophyllum inophyllum nagchampa, M. indica and Madhuca longifolia (mahua), Simmondsia chinensis (jojoba), and Ceiba pentandra (silk cotton tree) [15].
Among inedible oil resources, Jatropha is identified as one of the most suitable feedstock due to its high oil content, strong resistance to drought and pests, and good adaptability to the soil condition [16, 17]. The seed production is up to 0.8 kg/m2 annually, and the oil content of the seeds is about 38–41 wt.% and the oil content of kernel is between 49 and 62 wt.% [18]. Jatropha is especially abundant in the southern part of China, especially in Guangxi, Yunnan, Sichuan, and Guizhou, with a total forest area of 20 × 104 ha [19]. In the natural environment in China, seed yield per hectare is about 0.75 ton annually and the oil yield is about 0.225 ton annually, which results in 150,000 ton of seed production and 45,000 ton of oil [19]. Jatropha was introduced from the Caribbean region to Asia and China by Portuguese in the fourteenth to fifteenth century [20]. Jatropha oil was directly burned for lighting in the earlier time. In the 1930s, Jatropha was firstly applied as the water and soil conservation plant. In the late 1970s, the research and development of Jatropha oil as a raw material for biodiesel production started to emerge [19]. In 2005, the National Forestry Administration of China initiated a national Jatropha biodiesel program, in order to fully develop Jatropha biodiesel industry [19]. The cultivation of Jatropha also promotes the development of rural area and stimulate the local economy, which results in an economically profitable, ecologically viable, and socially acceptable agroforestry system. Industrial stakeholders, such as Sinopec, Petro, China, China National Offshore Oil Corporation, and China Oil and Foodstuffs Corporation, have been investing in Jatropha forest cultivation and biodiesel processing innovation and technology.
It has been widely proved that Jatropha is a highly promising oil feedstock to produce biodiesel. In addition to the selection of more suitable feedstock oils, the dominant trend in biodiesel research continues to be the synthesis of innovative and efficient catalysts [21,22,23]. There are also a few studies that used software modeling to design, optimize, and monitor biodiesel production processes [24, 25]. However, the energy consumption, emissions, and economics of the process need to be fully investigated and understood upon selecting an uncommon feedstock oil for biodiesel production. Therefore, to promote the production and utilization of Jatropha biodiesel, it is necessary to evaluate its entire up-production process. A life cycle assessment (LCA) is a systematic tool that assesses the environmental influence of a process, product, or activity from “cradle to grave” [26]. From the early 1970s to today, LCA is fully developed and applied in various scenarios and cases [27,28,29,30,31]. LCA boundary is set up to include six stages: (1) extraction and processing of feedstock; (2) manufacture; (3) transportation and distribution; (4) utilization, reuse, and maintenance; (5) recycling; and (6) disposal [32]. Therefore, LCA helps to identify the most important impacts and activities in the life-cycle that require improvement. According to the International Organisation for Standardisation (ISO, 14,040:2006), an LCA study is composed of four phases, including goal definition and scoping, inventory analysis, impact assessment, and interpretation [33, 34].
There are several LCA studies on the preparation of biodiesel from Jatropha seed, especially from India [27], Malaysia [35], Thailand [36], Mexico [30], Zimbabwe [37], and Indonesia [38], but few studies have been reported from China. Most of the studies chose waste cooking oil (WCO) or palm oil as the feedstock oil, and the evaluation method was only using LCA or Life Cycle Cost (LCC). More importantly, most of the currently reported LCA studies of biodiesel are based on a homogeneous base catalyst system, using NaOH [27, 30, 39], KOH [40], and NaOCH3 [41] as catalysts to promote transesterification reactions of oil feedstock. Such a homogeneous system is suffered from the drawbacks of generating a large amount of waste water and complicated catalyst separation [42, 43]. Consequently, the heterogeneous catalytic system is gaining inevitable interests in various chemical reactions, which has presented great environmental and economic potentials in chemical industries, since it is easily separable and reusable [44, 45]. As a heterogeneous base catalyst, Ca(OCH3)2 has been extensively studied and applied in the transesterification reactions to produce biodiesel and it showed excellent catalytic activity [46,47,48,49], while its LCA study has not yet been reported. Although the application of heterogeneous catalysts is still at laboratory stage and has not been expanded to industrial scale, its LCA study has instructive significance and can provide insightful guidance for industrial development of biodiesel.
It is highlighted that Ca(OCH3)2 was chosen as a novel heterogeneous catalyst for transesterification of Jatropha oil to produce biodiesel in this study, to evaluate its real industrial potential in biodiesel production and utilization. In addition, a LCC is integrated within the LCA boundary model to assess economic feasibility of the process. Both methods have been used to study biodiesel production from different feedstock oils (soybean oil, microalgae oil WCO, etc.) and most of the processes used homogeneous catalytic systems (Table 2). However, LCA and LCC study of Jatropha biodiesel production using heterogeneous catalytic system is not yet reported. In this work, the energy, environmental, and economic impacts of the Jatropha biodiesel that are produced from heterogeneous catalytic system are comprehensively investigated, to provide a holistic overview of its sustainability and help with decision-making of biodiesel industry development.
2 Materials and methods
Jatropha oil is applied as the oil feedstock for transesterification to produce biodiesel. Its general physicochemical properties are presented in Table 3. Due to its relatively high acid value, a homogeneous base catalyst (e.g., NaOH, KOH) is not suitable for its direct transesterification. Meanwhile, Jatropha oil can be directly converted to biodiesel with the heterogeneous base catalyst under relatively moderate reaction conditions [57]. The physical and chemical properties of Jatropha biodiesel are presented in Table 4. The properties of Jatropha biodiesel [58,59,60] are similar to that of diesel [61], with the advantages of low viscosity, high flash point, and high cetane number. Biodiesel produced from Jatropha oil meets American Society of Testing Materials (ASTM) [59] biodiesel standard and can be used directly in the engine to replace petroleum diesel [62, 63].
2.1 Objective and scope
The main objective of the LCA and LCC in this study is to evaluate the energy consumption and environmental emissions during the life cycle of Jatropha biodiesel under the China condition from cradle to wheel, quantify the impacts on the environment, compare the cost of each stage in the life cycle and analyze the common benefits of environment and economy.
In this study, the LCA method was used to evaluate the life cycle of Jatropha biodiesel under the China condition. The system boundary includes Jatropha planting, extracting Jatropha oil from the seeds to produce biodiesel, and using this biodiesel in vehicles. The energy consumption and environmental emissions at different stages were investigated, to quantitatively evaluate the environmental impact and types of the whole process. On the basis of the LCA boundary framework, LCC is incorporated to evaluate the economic feasibility of Jatropha biodiesel production.
2.2 Functional unit and assumptions
The functional unit is the preparation and utilization of one ton of Jatropha biodiesel by an average car on an average road, so that it is easier to be compared with diesel and other types of biodiesel. In the LCA of Jatropha biodiesel production, the following assumptions are made:
-
Jatropha trees have been grown for 3–4 years and the seeds yields are relatively stable [64]. The age of Jatropha trees is assumed, because only when the trees are 3 years old, they will give stable fruits production [65].
-
In order to reduce transportation costs, the oil extraction equipment is nearby (within 2 km) the biodiesel production plant. This distance is assumed on the basis of average distance from previously published work [53, 66].
-
The capacity of the biodiesel plant is 100, 000 t/year and the lifetime of the biodiesel plant is 30 years [53].
-
The separation efficiency of biodiesel and glycerol is 100% for the maximizing of resource utilization.
-
Economic benefits generated from by-product seed cake, shell combustion for power generation, and glycerol are considered in the Jatropha biodiesel production process.
-
Biodiesel is used at full load condition in diesel engines, so that the biodiesel is combusted in the same working condition, reducing the error of energy consumption and pollutant emission [64].
-
The Chinese government strongly supports renewable energy production, and allocated corresponding land for Jatropha cultivation, so land cost is not taken into account when calculating the life cycle cost [67].
2.3 System boundary
The system boundary defines the basic components and elements that are composed in the LCA study. The geographic boundary selected for the current study is China. Figure 1 shows the life cycle system boundary of Jatropha biodiesel production in the current study, including Jatropha plantation, seed harvest and separation, oil extraction, biodiesel production and by-production application, biodiesel transportation, and biodiesel utilization in a vehicle. The system boundary also presents the main inputs and outputs for the processes. The seed cake produced from the process can be used as fertilizer during Jatropha growth and Jatropha shells are used for direct combustion to generate electricity. The by-product, glycerol, is a value-added chemical, which can be sold as additives for fuels [68,69,70]. It is worth to mention that the preparation of Ca(OCH3)2 catalyst was considered a part of transesterification in our study. The outputs of the system include waste gas emission, waste water, biodiesel product, glycerol by-product, and heat.
2.4 Assessment indexes
The assessment indexes of biodiesel life cycle include the life cycle energy consumption and life cycle emissions. The life cycle emission inventories mainly study the emissions of CO2, SO2, NOx, CH4, CO, and dust pollutants. The pollutant data generated at different stages are collected from previous studies. Life cycle energy consumptions including electricity, coal, and fuel are calculated in units of MJ. The production of electricity will emit corresponding pollutants. Leng et al. [71] showed that 1 kW \(\bullet\) h of electricity in China contributed to 413.452 g of CO2, 1.268 g of SO2, 0.532 g of NOx, 0.004 g of CH4, 0.041 g of CO, and 0.053 g of dust (PM10).
The quantitative analysis of pollutant emissions during the life cycle of Jatropha biodiesel includes GWP (global warming potential), AP (acidification potential), EP (eutrophication potential), and PMF. GWP is used to characterize the ability of various greenhouse gases (e.g. CO2, N2O, CF4, CH4, NOx) that cause global warming [72]. In this paper, CO2, CH4, and NOx are considered the greenhouse gases and kg CO2-eq is used as the reference unit for calculation. AP refers to the formation capacity of acid rain caused by SO2 and NOx, which is quantified using the reference unit of kg SO2-eq. EP refers to the ability of pollutant discharge to deteriorate water quality (freshwater and marine), which is calculated using kg PO4-eq as the reference units. PMF refers to the ability of pollutant emissions that increase particulate matter in the air. Particulate matter is a mixture of very small particles, and it is calculated using kg dust as the reference unit [40].
The life cycle cost (unit: USD) is a method to assess the total cost of a subject during its life cycle, which is composed of raw material cost, capital cost, operational cost, fuel cost, and land cost [73]. In this study, since the biodiesel industry is strongly supported by the government, it is assumed that the land is allocated by the government, so the calculation of land cost is neglected [67]. The economic feasibility of Jatropha biodiesel was investigated by calculating its LCC, in order to provide informative guidance for the government and companies to develop biodiesel industries. The price of electricity in China is regulated by China Power Grid. The price of methanol is from East China Port of Methanol Market and calcium oxide price is from Changshu Sanhe Calcification Company. Other cost data are from references or market surveys.
2.5 Life cycle inventory (LCI) analysis
The LCI data were collected from various sources to model the environmental performance of Jatropha biodiesel. The target of LCI is to establish a data list on the basis of the functional unit and present the energy and mass flows during the Jatropha biodiesel production system. The production and utilization of Jatropha biodiesel comprise five stages, namely Jatropha plantation, the extraction of seed oil, transesterification of Jatropha oil, transportation at different stages, and utilization of Jatropha biodiesel (Fig. 1).
2.5.1 Jatropha plantation
Jatropha starts to produce fruits from the second year since its plantation and the yield stabilizes from the fourth or fifth year. Its average lifetime with effective fruit yield is up to 50 years [64]. Wild Jatropha can grow well under natural conditions, but the appropriate application of chemical fertilizers can enhance the yields of Jatropha seeds in large-scale artificial planting environments. In the process of following Jatropha oil extraction, a large amounts of by-product seed cakes will be produced. Seed cake yields vary according to the oil content of the Jatropha seeds, ranging between 30 and 37.5% of the total Jatropha seed weight [74]; thus, it is assumed to be 30% in this study. Unlike seed cake from rapeseed and palm tree seed, Jatropha seed cake cannot be used as animal feed, because it contains a certain amount of curcin and therefore is not suit for animal feeding [35]. However, it contains a high amount of protein (50–65%), which can be used as a suitable organic source of nutrients [35]. One ton of seed cakes are equivalent to 44 kg of nitrogen fertilizer, 19 kg of P2O5, and 13 kg of K2O [75]. Therefore, it is common to apply seed cake as an organic fertilizer [19], which not only reuses the by-products but also reduces the application of chemical fertilizers. In order to increase the yield of Jatropha seed, the seed cake and fertilizer are mixed and applied in the fields.
According to Portugal-Pereira et al. [29], planting 2.68 ton of Jatropha seeds needs 51.99 kg of nitrogen fertilizer, 14.47 kg of P2O5, and 9.65 kg of K2O. Table 5 presents the inventoried data during the process of Jatropha plantation, oil extraction, biodiesel production, and biodiesel utilization. Table 6 summarizes the overall pollutant emissions during each stage of biodiesel production from Jatropha (the detailed calculations at each stage are presented in Appendix A). During the growth period of Jatropha, the control of disease is not considered, as Jatropha is disease resistant and the damage from insects is not significant [76]. In order to reduce the impact of weeds and protect the environment, the farmland is manually mowed twice a year. Although Jatropha has strong drought tolerance, it is very water-consuming during the growth period [77]. In the first 3 years of Jatropha sprouting and growth, irrigation demand was relatively large [75], but this article has assumed that the Jatropha plants are already in a stable growth period, considering the 50-year life expectancy of Jatropha, the annual irrigation demand is about 210 m3/ha [29].
The seed yield of Jatropha is one of the most important factors determining its economic feasibility, it varies between 0.3 and 5.25 t/ha in China, depending on the climatic and soil condition and the breed type [19, 78]. The oil content of Jatropha seeds varies greatly between 32.2% to 40.2% [18]. The oil content of Jatropha seeds can be stabilized at 40% by improving the quality of Jatropha seeds breed and soil management [76]. Therefore, this study assumes that the oil content of Jatropha seeds is 40%, and the production of 1 ton biodiesel requires 2.68 ton of Jatropha seeds. When the Jatropha seeds are mature, the Jatropha seeds are harvested by manual picking. They were sun-dried and manually shelled, which reduces the consumption of fossil energy but increases labor force cost.
2.5.2 Oil extraction
Mechanical extraction was applied to obtain Jatropha oil from Jatropha seed. The energy consumption in this process is mainly electric energy. The processing capacity of 1 ton of Jatropha oil requires 7.41 kW \(\bullet\) h of electrical energy [76]; thus, the energy consumption during the oil extraction process is 7.93 kW \(\bullet\) h, which is 28.55 MJ of energy. It was suggested that 0.4 ton of shells are produced as residue from 1 ton of Jatropha seeds processing [29]; thus, 2.68 ton of Jatropha seeds produces 1.07 ton of shells. These shells can be used to generate electricity through direct combustion and provide electricity for the system. The calorific value of the Jatropha shell is 17.22 MJ/kg [79] and the generated CO2 during the combustion process can be offset by the CO2 absorption during the photosynthesis process. Maiti et al. [79] showed that the power generation efficiency of Jatropha shell was 24.50%; thus, 1.07 ton of Jatropha shells can generate 1256.29 kW \(\bullet\) h of electricity, which is 4522.64 MJ of energy. The data of pollutant emissions during the combustion of Jatropha shells are collected from literature (Table 6, see Appendix A for detailed calculations) [81].
2.5.3 Transesterification of Jatropha oil
The transesterification (Eq. 1) is commonly used to produce biodiesel, which converts oil feedstock and alcohol into methyl (or ethyl) esters and glycerol with the assistance of catalysts. Biodiesel is the major product and glycerol is the by-product [87]. An excessive amount of alcohol is required in the transesterification process, in order to maximize the biodiesel yield. Methanol is preferred, due to its relatively cheaper price [88, 89]. Although CaO catalyst has strong alkalinity, the transesterification reaction rate using pure CaO catalyst is very slow, due to its poor reactivity and stability [90]. On the other hand, the activity of alkali metal alkoxide is higher than that of CaO and Ca(OH)2; thus, Ca(OCH3)2 catalyst shows promising potential in transesterification reactions [57]. Teo et al. [57] synthesized Ca(OCH3)2 catalyst and applied it to the transesterification of Jatropha oil. It was easy to prepare, non-toxic, and cost-effective, presenting excellent catalytic ability, stability, and easy separation property. Table 7 shows the structural properties of Ca(OCH3)2 and biodiesel yield at the optimized reaction conditions. Therefore, under their optimized condition, the production of 1 ton of biodiesel requires 1.07 ton of Jatropha oil, 502.17 kg of methanol, and 21.43 kg of Ca(OCH3)2 catalyst, while producing 105.50 kg of glycerol as by-products.
![figure b](http://media.springernature.com/lw685/springer-static/image/art%3A10.1007%2Fs13399-022-03614-7/MediaObjects/13399_2022_3614_Figb_HTML.png)
Equation 1 Transesterification reaction.
The preparation of Ca(OCH3)2 catalyst mainly consumes electric energy. According to our calculation based on the catalyst preparation procedure, the preparation of 21.43 kg of catalyst consumes about 25 kW \(\bullet\) h of electricity, which is 90.00 MJ of energy [57]. Methanol is produced using the Chinese coal method. The production of 1 kg of methanol requires 8.205 MJ of energy while emitting 0.1936 g of CO2, 0.119 g of SO2, 0.299 g of NOx, 0.0036 g of CH4, 0.009 g of CO, and 0.492 g of dust into the environment [82, 83]. Therefore, producing 502.17 kg of methanol consumes 4120.30 MJ of energy and emitting 2.04 kg of CO2, 1.25 kg of SO2, 3.15 kg of NOx, 0.04 kg of CH4, 0.09 kg of CO, and 5.19 kg of dust (Table 6, see Appendix A for detailed calculation).
In the process of transesterification under the aforementioned optimized reaction condition, the electrical energy consumption is calculated. The production of 1 ton of biodiesel requires 34.2 kW \(\bullet\) h of electricity, which is 123.12 MJ of energy. Meanwhile, it releases 14.14 kg of CO2, 0.04 kg of SO2, 0.018 kg of NOx, 0.0001 kg of CH4, 0.0014 kg of CO, and 0.0018 kg of dust (Table 6, see Appendix A for detailed calculation) [74]. To ensure the quality of biodiesel, crude biodiesel needs to be washed with water to remove the impurities, such as excessive methanol, by-product glycerol, soap, and trace catalysts [59, 80, 91]. After calculation, the water resource consumption for producing 1 ton of biodiesel conversion is 0.37 m3 [92].
While producing 1 ton of biodiesel, 105.50 kg of by-product glycerol is produced. Crude glycerol is a good fuel additive, which can improve fuel performance, increase flow performance, and reduce hazardous substances in the combustion exhaust gas. Therefore, by-product glycerol is applied to diesel as a high value-added glycerol fuel additive in this study [11].
2.5.4 Transport process
The transportation process includes the transportation of Jatropha seeds, the transportation of seed cake and fertilizer, the transportation of biodiesel and glycerol. Assuming that the distance of each transportation stage is 50 km [29, 93], and a medium-sized truck was used as a transportation vehicle that is fueled by diesel. Transportation energy consumption and emission data are shown in Table 4 and detailed calculation can be found in Appendix A [84,85,86].
2.5.5 Inventory analysis of LCC
The life cycle cost (Ct) is composed of variable cost (Cv) and fixed cost (Cf), in which variable cost includes the raw material cost (Cr), operation cost (Co), fixed cost includes human cost (Ch), land cost (Cl), and equipment asset depreciation (Ce). China’s land is under a socialist public ownership system, with a part of it being allocated to farmers, and the rest are state-owned land that are managed by the State Council on behalf of the country. The Chinese government vigorously supports the renewable energy production and allocates the corresponding land for Jatropha planting; thus, the cost of land is no longer considered. Therefore, the LCC is calculated as follows:
2.5.6 Variable cost
During the life cycle of biodiesel production, raw materials include Jatropha oil [94], methanol, Ca(OCH3)2 catalyst [57] (produced from calcium oxide and methanol) and water. The prices of methanol and calcium oxide refer to the commercial market price from East China Port of Methanol Market and Changshu Sanhe Calcification Company. Industrial water consumption is also taken into account. Wang’s [95] research showed that an appropriate increase of industrial water price was beneficial for saving water resources and improving water resource utilization efficiency. The price of water in this study refers to shadow price of industrial water in Jiangsu Province, which is 7.53 USD/m3 (47.84 RMB/m3).
Operational costs include the electricity consumption during the life cycle of biodiesel production and diesel consumption during transportation. According to the China Power Grid, the average electricity price in China is 0.094 USD/kW \(\bullet\) h (0.6 RMB/kW \(\bullet\) h). During the entire life cycle, the process stages consuming electrical energy include the biodiesel production, the catalyst preparation, and methanol production.
2.5.7 Fixed cost
In the research of this study, the fixed cost calculation includes equipment asset investment and its depreciation and labor cost. Labor cost includes the staff, management, and the drivers of the transportation cargo. Assuming that the staff works 8 h a day, the average wage is 23.62 USD (150 RMB) per person a day by surveying the local labor market in Jiangsu Province. The overall cost calculations can be found in Appendix B.
3 Results and discussion
3.1 LCA results and interpretation
The corresponding proportion of each emission in different stages of the Jatropha seeds biodiesel life cycle was shown in Fig. 2. It can be seen from Table 6 and Fig. 2, the CO2 emission is the most significant pollutant, with a value of 1184.52 kg. The use of fertilizers in the planting stage of Jatropha is the main cause of CO2 emission, which accounts for 94% of the total CO2 emissions. The emissions of dust and NOx are 5.86 and 5.59 kg, respectively, which are much smaller than CO2 emissions. Methanol production and Jatropha shell combustion are the major causes of dust emission, accounting for 89% and 9% of the total dust emission, respectively, and the sum of the two is as high as 98%. Similarly, methanol production, fertilizer, and Jatropha shell combustion are the main contributors for the NOx emission, accounting for 56, 23, and 16% of the total NOx emission, respectively. The emissions of SO2, CH4, and CO are both within 3 kg; thus, they have relatively little impacts on the environment.
During the life cycle of 1 ton of biodiesel from Jatropha oil, the energy consumption is 17566.16 MJ. Table 4 shows the calorific value of Jatropha biodiesel is 35.136 MJ/kg, which means the energy of 1 ton of Jatropha biodiesel is 35136 MJ. The net energy ratio (NER, NER = renewable energy output / full energy input) was estimated according to the input and output energy of 1 ton of Jatropha biodiesel, and it is used as an indicator of energy efficiency [96,97,98]. In this study, the NER for Jatropha biodiesel is 2.00. According to Mohammadshirazi et al. [99], NER of waste cooking oil biodiesel was 0.67. Passell et al. [100] reported that NER of algae biodiesel production was 0.64. The results of Morales et al. [96] showed that the NER of soybean biodiesel is about 0.85. The large NER value is favored, since it means more renewable energy is produced by consuming less energy input. Therefore, in comparison with aforementioned waste cooking oil and algae biodiesel, Jatropha biodiesel production is more energy efficient. Further analyzing the energy consumption of each production stage, it can be seen from Fig. 3 that the energy consumption of chemical fertilizers is the most significant stage, which is 17260.92 MJ, accounting for 78.14% of the total energy consumption. The energy consumption of methanol production is also considerably high, which is 4120.30 MJ, accounting for 18.65% of the total energy consumption. The transportation, biodiesel production, catalyst production, and Jatropha oil extraction processes consume much less energy, which account for 2.11, 0.56, 0.41, and 0.13% of the total energy consumption, respectively. It is noted that 4522.64 MJ of energy is generated during the Jatropha shell combustion process to generate electricity, which can compensate 20.48% of the total energy consumption during the entire life cycle of Jatropha biodiesel production.
3.2 LCA comparison and improvements
The choice of feedstock is crucial to the development of biodiesel. In China, soybean oil [101], waste oil [102], microalgae oil [67], and Jatropha oil [103] are the most widely used. Yang et al. [104] compared the energy consumption and pollutant emissions in the production of biodiesel from soybean oil and waste oil using LCA method. The total energy consumption of 1 ton of soybean oil biodiesel in the life cycle was 15,990.75 MJ, and the CO2 emission was 2411.29 kg. The total energy consumption of the waste oil biodiesel in the life cycle was 6033.23 MJ, and the CO2 emission was 411.93 kg. Luo et al. [105] designed an integrated refinery process with a daily output of 8.8 ton of microalgae biodiesel, and carried out life cycle analysis accordingly. Their results show that the total energy consumption for producing 1 ton of microalgae biodiesel was 10,592.41 MJ, and the CO2 emission was 2208.21 kg. The results of our study show that the total energy consumption of 1 ton of Jatropha biodiesel in the life cycle is 17566.16 MJ, which is slightly higher than the aforementioned studies, but the CO2 emissions are relatively smaller, only 1184.52 kg. Compared to previous studies [104, 105], the low CO2 emissions could be attributed to the process of fertilizer use and catalyst preparation. Jatropha tree can grow in poor soil condition and requires less fertilizer than other plants (soybean, palm, rapeseed, etc.) for growth. Moreover, the by-product seed cake was used as a fertilizer, which further reduced the use of fertilizer. In addition, Ca(OCH3)2 is a green, environmentally friendly catalyst that released a small amount of CO2 during the preparation process [57].
By analyzing of the energy consumption and pollutant emissions of each production stage, the application of fertilizers during the Jatropha plantation, the production process of methanol and combustion of Jatropha shell need to be further improved. One possible solution is to reduce the amount of fertilizer applied in farmland, which can be achieved by modifying the application techniques (e.g. buried deeply in the soil to maximize the effects of fertilizer and use liquid fertilizer like ammonium urea [106]). For methanol production, Wang et al. [107] optimized the coal-to-methanol production process. Their results showed that the energy consumption of coal-to-methanol was reduced by 16% and waste water, residue, and gases were also reduced after process optimization. Shi et al. [108] adopted the water electrolysis and tri-reforming production process for producing methanol in a more sustainable manner. Compared with the traditional methanol production process, their method substantially reduced the net CO2 emissions, which was 570,000 ton per year less for producing 1 ton of methanol.
Although a lot of CO2 is generated during the shell combustion process to generates electricity, the generated CO2 is absorbed back to Jatropha plants during its growth [29]. Due to the simple technology and low cost of combustion power generation, biomass combustion for power generation has become the most common practice in China. With higher requirements for environmental protection and sustainable development, novel technologies to minimize biomass (straw, leaves, and fruit shells, etc.) combustion pollutants have been reported. Lu et al. [109] proposed the use of biomass reburning denitrification technology, which effectively improved the denitrification efficiency and reduced NOx emissions by changing the biomass particle size, reburning temperature, and reburning ratio. Wang et al. [110] studied the mechanism of desulfurization and denitrification using TiO2 catalyst during biomass combustion. The results showed that TiO2 catalyst not only effectively improved combustion efficiency, but also catalyzed the desulfurization and denitrification reaction of CaO, reducing SO2 and NOx emissions. Therefore, appropriate strategies can be employed to improve methanol and combustion of Jatropha shell processes and reduce their pollutant emissions and energy consumption.
3.3 Environmental impacts evaluation of Jatropha biodiesel production
Four quantitative indicators of environmental impacts are analyzed in the current study, including GWP, AP, EP, and PMF. The above data are standardized and weighted respectively to obtain four types of environmental impact potential values, and further to analyze the overall environmental impact potentials of Jatropha biodiesel production throughout its life cycle. The results are presented in Tables 8 and 9 (see Appendix C for the detailed calculation).
For the global warming impact, CO2 has a smaller impact on GWP than NOx, since its impact potential is lower. On the other hand, although NOx emission quantity is about 212 times lower than CO2 emission quantity, it has a rather higher equivalent factor. As a result, the NOx emission has a greater impact potential of GWP, which is about 1.5 times larger than CO2 emission (Table 8). A large amount of NOx emission is produced during the methanol production, fertilizer application, and Jatropha shell combustion (Fig. 2). Similarly, the NOx emission is also the major reason for AP and EP. PMF pollution is caused by dust emission that is mainly from the methanol production and Jatropha shell combustion power generation stages (Fig. 2). During the life cycle of producing 1 ton of Jatropha biodiesel, the total weighted environmental impact potential was 0.70 mPEChina (Table 9). Among the four assessed environmental impact indicators, GWP is the most significant factor, accounting for 40.00% of the total weighted environmental impact potential, followed by PMF that accounts for 28.57% of the total weighted environmental impact potential. The environmental impacts of AP and EP are relatively small, accounting for 18.57 and 12.86% of the total weighted environmental impact potential respectively. Although CO2 emission has a significant amount, NOx emission has a more outstanding negative influence on the overall environmental impact during biodiesel production than CO2 emission. In summary, controlling the NOx emission during the combustion of Jatropha shells for power generation and improving the current methanol production technology for CO2 reduction are urgently required for resolving the environmental issues related to biodiesel production.
3.4 Comparison of pollutant emissions from biodiesel and diesel utilization
In comparison with diesel combustion, Jatropha biodiesel combustion is a rather clean process, as the pollutant emissions are significantly reduced (Table 10). It is highlighted that Jatropha biodiesel does not contain any sulfur; thus, the SO2 emissions are zero. In addition, CO2 and CO emissions of Jatropha biodiesel combustion is reduced significantly, both showing 48% reductions. Fine particulate matter (PM 2.5) and volatile organic compounds (VOC) emissions also decreased using Jatropha biodiesel. However, it was noted that the NOx emissions increased slightly using all types of biodiesel products presented here [64]. For Jatropha biodiesel, the NOx emission increased by 10%, which is comparable to that of other biodiesel products. Compared to diesel, biodiesel has a higher oxygen content. As the engine load increases, the temperature in the cylinder increases, which is beneficial to NOx formation [113,114,115]. In comparison with other popular biodiesel products, such as rapeseed biodiesel (R-BD) [116], waste cooking oil biodiesel (W-BD) [117] and microalgae biodiesel (M-BD) [118], Jatropha biodiesel (J-BD) is evidently advantageous, due to its effective reduction of pollutant emissions and minimized environmental impacts (Table 9). Overall, the application of biodiesel can significantly alleviate the environmental burdens caused by traditional diesel utilization and Jatropha biodiesel shows a particularly promising prospect.
3.5 LCC result and interpretation
The life cycle costs of producing 1 ton of Jatropha biodiesel are given in Table 11 (see Appendix B for the detailed calculation). As can be seen, the cost of Jatropha biodiesel is 796.32 USD/ton. According to the research of Liu et al. [51], the production cost of diesel accounts for 63% of its retail price, which is about 3806.72 RMB/t (599.48 USD/ton). Compared to the cost of diesel, the cost of Jatropha biodiesel is 32.84% higher. The cost of Jatropha biodiesel is dominantly influenced by the price of Jatropha oil that accounts for 44.37% of the total cost. Human cost and methanol cost are also significantly high, accounting for 26.70 and 16.88% of the total cost of Jatropha biodiesel, followed by catalyst cost, accounting for 9.09%. The costs of water, electricity, diesel, and capital investment are relatively small. It is noted that in comparison with other popular oil feedstocks, Jatropha oil is much lower, which is only higher than that of waste cooking oil (Table 12). Therefore, Jatropha biodiesel has been considered a promising biofuel that has true economic viability in different countries. Sampattagul et al. [119] showed that the cost of Jatropha biodiesel in Thailand was 0.6 Euro/L, which was 773.09 USD/ton (1 Euro = 1.13 USD), which is 2.92% lower than our results. Wang et al. [76] analyzed the economic feasibility of biodiesel production from Jatropha oil, and the results showed that the cost of Jatropha biodiesel was 9 RMB/L (1616.10 USD/ton) that is 72.41% higher than the price of diesel (0.822 USD/L). The results of this paper show that the cost of Jatropha biodiesel is 50.73% lower than that of Wang’s research.
By comparison, it is found that the cost of Jatropha biodiesel is greatly affected by the Jatropha seeds yield. The cost of Jatropha biodiesel decreases with increasing seeds yield. Baral et al. [125] showed that the cost of Jatropha biodiesel in Nepal was 1.2–1.5 USD/L; thus, the lowest cost was 1368.30 USD/ton. Yusuf et al. [94] in Malaysia showed that the cost of Jatropha biodiesel was 0.78 USD/kg, which was 780 USD/ton. Quintero et al. [126] in Peru reported that the cost of Jatropha biodiesel was between 0.84 and 0.87 USD/L, and its lowest cost was equivalent to 957.81 USD/ton. The result in our study is either close or lower than these reported ones. By comparison, it was discovered that the cost of Jatropha oil is playing a key role in determining the overall cost of Jatropha biodiesel, and an improved yield of Jatropha seeds can significantly reduce the cost of Jatropha biodiesel. Overall, our results show that the production of biodiesel from Jatropha oil has great economic advantages in China.
In order to further explore the factors affecting the price of Jatropha oil, a detailed cost analysis of Jatropha oil is performed based on LCA (Table 13, see Appendix D for detailed calculation). It is found that the gross cost of producing 1.07 ton of Jatropha oil is 366.83 USD, which is close to the selling price of Jatropha oil (330.21 USD) given in the references, considering the profit margin for oil company [94]. For the gross cost of Jatropha oil, the labor cost of two stages is the dominant factor, accounting for 83.71% of the total cost of Jatropha oil production. Except the inevitable labor input, such as picking Jatropha seeds, transportation, and management, other manual processes can be improved by using agricultural machinery equipment to reduce the gross cost of Jatropha oil production. For instance, a lawnmower can be used to weed the Jatropha fields that have a large gap (2 m × 3 m) between trees [76], which not only improves the efficiency of removing weed but also reduces labor costs. A fruit shelling machine can be used to perform Jatropha seeds and shells separation process [127], but incomplete separation and the presence of impurities in the nuts still exist using the current technology platform. Therefore, innovative modern agricultural machinery technology needs further improvement for the large-scale treatment of Jatropha seeds to reduce labor costs and time in the long run.
It is worth to mention that additional economic profit can be gained from the whole process of biodiesel production from Jatropha oil. Combustion of Jatropha shells to generate electricity and selling glycerol as a fuel additive can bring extra economic benefits. The combustion of 1.072 ton of Jatropha shells can produce 1256.29 kW·h of electricity, which is 118.70 USD. The market price of crude glycerol is 0.08–0.2 USD/kg [128, 129]. In this study, we take the median value of 0.14 USD/kg; thus, the price of 105.50 kg by-product glycerol is 14.77 USD. In the life cycle process of biodiesel production from Jatropha oil, the total economic benefits brought by by-products are 133.47 USD, which can compensate 16.76% of the life cycle cost, making biodiesel production from Jatropha oil more economically competitive.
3.6 Sensitivity analysis of the LCC study
A sensitivity analysis is necessary when different variables influence the results and it can evaluate the influence of variables on the economy [130, 131]. In biodiesel production processes, in addition to raw materials and equipment, operating conditions also affect biodiesel yields and hence the cost of biodiesel [132]. With reference to the operating conditions and results from the experiments of Teo et al. [57], sensitivity analysis of the cost of biodiesel was carried out by varying alcohol/oil molar ratio (15, 12, and 9). Using the same calculation method, when the alcohol/oil molar ratio is 12, the biodiesel yield is approximately 85%, requiring 1195.92 kg of Jatropha oil and 449.01 kg of methanol. The total cost of 1 ton of Jatropha biodiesel is 822.87 USD, of which 48.15% is contributed by the feedstock oil and 14.61% is caused by the methanol cost. With an alcohol/oil molar ratio of 9, the biodiesel yield was approximately 68%, requiring 1195.92 kg of Jatropha oil and 449.01 kg of methanol. 1 ton of Jatropha biodiesel costs 907.58 USD, of which 54.58% is attributed to feedstock and 12.42% is caused by methanol. The costs of Jatropha biodiesel produced using different alcohol/oil molar ratios are compared in Fig. 4. In comparison to the cost of biodiesel production with an alcohol/oil molar ratio of 15, the cost of biodiesel production using alcohol/oil molar ratios of 12 and 9 increased by 3.33 and 13.97%, respectively. Although the cost of methanol was reduced using a lower alcohol/oil molar ratio, the cost of Jatropha oil increased significantly, resulting in an increase in the total cost of biodiesel. Therefore, the feedstock oil has a significant influence on the cost of biodiesel and the selection of suitable and cheap oil is beneficial to reduce the cost of biodiesel production [133,134,135].
3.7 Limitations of Jatropha biodiesel development
From the LCA and LCC results, the production of biodiesel from Jatropha oil has a great potential, but there are still some limitations. Many Jatropha projects have been implemented in many countries over the past decades, but there are different constraints to Jatropha cultivation and biodiesel production in different regions (Table 14) [136, 137]. It is clear from Table 14 that there are still major problems related to the cultivation of Jatropha in most countries. Many companies that invested in Jatropha cultivation and biodiesel production have stopped or suspended their investments after a few years of operation [138]. In addition, studies have shown that lower than expected seed yields are responsible for the termination of Jatropha projects established in many areas [139, 140]. Low water availability, bad soil quality, and poor agronomic skills of the farmers have led to a significant decrease in Jatropha seed yields. In contrast, areas with suitable soil types and moderate rainfall (900–1200 ml) can produce more than 5 t/ha of seed in 1 year [141]. However, there is no commonly agreed criteria for assessing the effect of soil type and quality on the yield and quality of Jatropha seeds and their oil content [142].
We also note that although various techniques have been used for the production of biodiesel from Jatropha oil, most of them have been carried out in bench or pilot scale and may have limitations for industrial biodiesel production processes [136]. Studies have shown that 24% of the various factors affecting Jatropha cultivation are related to economic issues [160, 161]. It appears that seed collection and processing is still done manually, increasing the total cost of Jatropha biodiesel. In addition, the by-products generated in the process from Jatropha cultivation to biodiesel production have limited market [152, 162]. Therefore, the development of Jatropha biodiesel requires even more technology and engineering advancement, as well as national policy support to urge local implementation of biofuels as a strategy for rural development [156].
In order to evaluate more objectively the indicators of the Jatropha biodiesel production process, other evaluation methods, such as those based on concepts of emergy, energy, and exergy use, should be used in addition to the LCA and LCC methods [163, 164]. The concept of emergy, which integrates ecology, thermodynamics, and general systems theory, has been developed to assess the long-term sustainability of systems [165]. But the method has shortcomings such as lack of accuracy, consistency, reproducibility, and completeness. Traditional energy analysis is based on the first law of thermodynamics, and cannot provide reliable insights on the efficiency, productivity, and sustainability of production systems [163] Exergy is a rigorous engineering accounting technique that reveals the degree of sustainability of an energy system, also taking into account economic and environmental aspects [166]. Overall, all of these methods have some limitations and may lead to misleading conclusions. Combining two or more methods seems to be a promising tool to analyze biofuel production systems and contribute to the advancement of the biodiesel industry [167,168,169].
4 Conclusions and outlook
In the current study, the LCA and LCC analyses of the entire process of Jatropha biodiesel production were performed to evaluate its energy, environment, and economic impacts under Chinese conditions, and obtained the following results:
-
The LCA results show that the total energy consumption for producing 1 ton of Jatropha biodiesel is 17566.16 MJ. The largest energy consumption is attributed to the use of fertilizers, accounting for 78.14% of the overall energy consumption.
-
The production of 1 ton of Jatropha biodiesel emits a large number of pollutants, including 1184.52 kg of CO2, 5.86 kg of dust, 5.59 kg of NOx, 2.67 kg of SO2, 2.38 kg of CH4, and 1.05 kg of CO.
-
The total environmental impact load of Jatropha biodiesel preparation process is 0.70 mPEChina and its impact on the environment is mainly manifested in global warming due to CO2 and NOx emission and particulate matter formation due to dust emission.
-
The LCC results show that the cost of Jatropha biodiesel is 796.32 USD/ton, of which the cost of Jatropha oil and human are the major factors, contributing to 44.37 and 26.70% of the total cost.
-
A sensitivity analysis of the cost of biodiesel by varying the alcohol/oil molar ratio showed that the price of feedstock oil has a significant impact on the total cost compared to the price of methanol.
From the above conclusions, choosing cheap feedstock oil for biodiesel production can effectively reduce the cost of biodiesel. Overall, the use of Jatropha biodiesel has promising competitive advantages under southern China condition, considering its total energy consumption, environmental benefits, and economic feasibility. In order to fully realize a more sustainable and economical Jatropha biodiesel industry in China, several improvements have to be implemented:
-
Minimize or optimize fertilizer use by improving the application techniques or using novel liquid fertilizers.
-
The current coal-to-methanol production process has to be improved to reduce its pollutant emissions, which can be achieved using process optimization or a more environmentally benign process.
-
Although the Jatropha shell direct combustion process can be used to generate electricity and provide energy for the whole system, appropriate pollution control technology and strategies should be employed to effectively reduce the NOx and dust emissions.
-
Jatropha trees with high oil content should be bred to reduce the oil feedstock cost and modern agricultural machinery equipment should be used to continuously improve the biodiesel process, increase production efficiency, and reduce production costs.
Overall, the entire production process of Jatropha biodiesel was evaluated using LCA and LCC methods, and satisfactory results were obtained. Meanwhile, the issues were also objectively analyzed and corresponding improvement measures were proposed. The industrial development of biodiesel requires the evaluation of various indicators, and it is believed that this work can provide a theoretical basis for guiding Jatropha biodiesel industry from the environmental and economic perspectives. Biodiesel industry has been promoted with strong governmental support, such as allocation of land and financial subsidies. Based on this work, the government still need to further improve and refine related policies, such as lowering taxes, developing a complete industrial chain and promoting clean production of raw materials. In addition, the green chemistry concept and advanced machinery technology have to be employed, and cross-disciplinary collaborations are required to establish a circular economy for the sustainable development of Jatropha biodiesel industries in China.
Data availability
All the data is available in the manuscript.
References
Zhang Y, Duan L, Esmaeili H (2022) A review on biodiesel production using various heterogeneous nanocatalysts: operation mechanisms and performances. Biomass Bioenergy 158:106356. https://doi.org/10.1016/j.biombioe.2022.106356
Zhang Y, Huang Z, Dong C, Shi J, Cheng C, Guan X, Zong S, Luo B, Cheng Z, Wei D, Huang Y, Shen S, Guo L (2022) Synergistic effect of nitrogen vacancy on ultrathin graphitic carbon nitride porous nanosheets for highly efficient photocatalytic H2 evolution. Chem Eng J 431:134101. https://doi.org/10.1016/j.cej.2021.134101
Attari A, Abbaszadeh-Mayvan A, Taghizadeh-Alisaraei A (2022) Process optimization of ultrasonic-assisted biodiesel production from waste cooking oil using waste chicken eggshell-derived CaO as a green heterogeneous catalyst. Biomass Bioenergy 158:106357. https://doi.org/10.1016/j.biombioe.2022.106357
Correa Guerrero NB, Herrera Martínez WO, Civit B, Perez MD (2021) Energy performance of perovskite solar cell fabrication in Argentina. A life cycle assessment approach. Sol Energy 230:645–653. https://doi.org/10.1016/j.solener.2021.10.071
Xu H, Yin B, Liu S, Jia H (2017) Performance optimization of diesel engine fueled with diesel–jatropha curcas biodiesel blend using response surface methodology. J Mech Sci Technol 31(8):4051–4059. https://doi.org/10.1007/s12206-017-0753-5
Demirbas A (2007) Importance of biodiesel as transportation fuel. Energy Policy 35(9):4661–4670. https://doi.org/10.1016/j.enpol.2007.04.003
Abdullah SHYS, Hanapi NHM, Azid A, Umar R, Juahir H, Khatoon H, Endut A (2017) A review of biomass-derived heterogeneous catalyst for a sustainable biodiesel production. Renew Sust Energ Rev 70(Supplement C):1040–1051. https://doi.org/10.1016/j.rser.2016.12.008
Panahi H, Dehhaghi M, Kinder JE, Ezeji TC (2019) A review on green liquid fuels for the transportation sector: a prospect of microbial solutions to climate change. Biofuel Res J 6(3):995–1024. https://doi.org/10.18331/BRJ2019.6.3.2
Demirbas A (2009) Political, economic and environmental impacts of biofuels: a review. Appl Energy 86(Supplement 1):108–117. https://doi.org/10.1016/j.apenergy.2009.04.036
Internation Energy Agency (2007) Medium and long-term development plan for Renew Energ. https://www.iea.org/policies/4691-medium-and-long-term-development-plan-for-renewable-energy [accessed 26 August 2022]
United States Department of Agriculture (USDA) (2020) Biofuels Annual. Beijing, China. https://apps.fas.usda.gov/newgainapi/api/Report/DownloadReportByFileName?fileName=Biofuels%20Annual_Beijing_China%20-%20Peoples%20Republic%20of_07-27-2020 [accessed 26 August 2022]
Leading biodiesel producers worldwide in 2019 (2020) https://www.statista.com/statistics/271472/biodiesel-production-in-selected-countries/. [accessed 26 August 2022]
Zhao J (2015) Development of China’s biofuel industry and policy making in comparison with international practices. Sci Bull 60(11):1049–1054. https://doi.org/10.1007/s11434-015-0803-2
Dyka J Sv, Ling L, Leal DB, Hu J, Zhang X, Tan T, Saddler J (2016) The potential of biofuels in China. International Energy Agency Bioenergy. https://task39.sites.olt.ubc.cafiles/2013/05/The-Potential-of-biofuels-in-China-IEA-Bioenergv-Task-39-September-2016.pdf. [accessed 26 August 2022]
Sani YM, Daud WMAW, Abdul Aziz AR (2012) Biodiesel feedstock and production technologies: successes, challenges and prospects. in: Z Fang (ed) Biodiesel - Feedstocks, Production and Applications, InTechOpen, Croatia, 78–100
Makkar HPS, Becker K (2009) Jatropha curcas, a promising crop for the generation of biodiesel and value-added coproducts. Eur J Lipid Sci Technol 111(8):773–787. https://doi.org/10.1002/ejlt.200800244
Achten WMJ, Verchot L, Franken YJ, Mathijs E, Singh VP, Aerts R, Muys B (2008) Jatropha bio-diesel production and use. Biomass Bioener 32(12):1063–1084. https://doi.org/10.1016/j.biombioe.2008.03.003
Wang Z, Calderon MM, Lu Y (2011) Life cycle assessment of the economic, environmental and energy performance of Jatropha curcas L. biodiesel in China. Biomass Bioener 35(7):2893–2902. https://doi.org/10.1016/j.biombioe.2011.03.031
Yang C, Fang Z, Li B, Long Y (2012) Review and prospects of Jatropha biodiesel industry in China. Renew Sust Energ Rev 16(4):2178–2190. https://doi.org/10.1016/j.rser.2012.01.043
Yang C, Fang Z, Li B, Liu G, Li J (2010) Breeding of high-oil Jatropha curcas L for biodiesel production. Chin J Biotechnol 26(11):1514–1525. https://doi.org/10.3788/HPLPB20102207.1462
Aderibigbe FA, Mustapha SI, Adewoye TL, Mohammed IA, Saka HB (2020) Qualitative role of heterogeneous catalysts in biodiesel production from Jatropha curcas oil. Biofuel Res J 7(2):1159–1169. https://doi.org/10.18331/BRJ2020.7.2.4
Laskar IB, Changmai B, Gupta R, Shi D, Rokhum L (2021) A mesoporous polysulfonic acid-formaldehyde polymeric catalyst for biodiesel production from Jatropha curcas oil. Renew Energ 173:415–421. https://doi.org/10.1016/j.renene.2021.04.004
Yusuff AS, Kumar M, Obe BO, Mudashiru LO (2021) Calcium oxide supported on coal fly ash (CaO/CFA) as an efficient catalyst for biodiesel production from Jatropha curcas oil. Top Catal 1-13. https://doi.org/10.1007/s11244-021-01478-1
Singh A, Sinha S, Choudhary AK, Sharma D, Panchal H, Sadasivuni KK (2021) An experimental investigation of emission performance of heterogenous catalyst jatropha biodiesel using RSM. Case Stud Therm Eng 25:00876. https://doi.org/10.1016/j.csite.2021.100876
Aghbashlo M, Peng W, Tabatabaei M, Kalogirou SA, Soltanian S, Hosseinzadeh-Bandbafha H, Mahian O, Lam SS (2021) Machine learning technology in biodiesel research: a review. Prog Energy Combust Sci 85:100904. https://doi.org/10.1016/j.pecs.2021.100904
Xu Y, Boeing WJ (2013) Mapping biofuel field: a bibliometric evaluation of research output. Renew Sust Energ Rev 28:82–91. https://doi.org/10.1016/j.rser.2013.07.027
Kumar S, Singh J, Nanoti SM, Garg MO (2012) A comprehensive life cycle assessment (LCA) of Jatropha biodiesel production in India. Bioresour Technol 110:723–729. https://doi.org/10.1016/j.biortech.2012.01.142
Gillani S, Sablayrolles C, Belaud JP, Montrejaud-Vignoles M, Lann JML (2011) Assessment of jatropha curcas bioprocess for fuel production using LCA and CAPE. Comput Chem Eng 29:1341–1345. https://doi.org/10.1016/B978-0-444-54298-4.50047-7
Portugal-Pereira J, Nakatani J, Kurisu K, Hanaki K (2016) Life cycle assessment of conventional and optimised Jatropha biodiesel fuels. Renew Energ 86:585–593. https://doi.org/10.1016/j.renene.2015.08.046
Alfredo Fuentes CG, Hennecke A, Masera O (2018) Life cycle assessment of Jatropha curcas biodiesel production: a case study in Mexico. Clean Technol Environ Policy 20(7):1721–1733. https://doi.org/10.1007/s10098-018-1558-7
Fawzy MM, Romagnoli F (2016) Environmental life cycle assessment for Jatropha biodiesel in egypt. Energy Procedia 95:124–131. https://doi.org/10.1016/j.egypro.2016.09.033
Azapagic A (2002) Life-cycle assessment: a tool for identification of more sustainable products and processes. in: D.J.M. James H. Clark (ed), Handbook of Green Chemistry and Technology, Blackwell Science. Oxford, UK, 62–83
International Organization for Standardization (2006) Environmental management–life cycle assessment - principles and framework. Geneva, Switzerland. ISO 14040:2006
Soukka R, Visnen S, Grnman K, Uusitalo V, Kasurinen H (2020) Life cycle assessment. Fourth ed. Springer, New York. https://doi.org/10.1007/978-3-030-02006-4_623-1
Lam MK, Lee KT, Mohamed AR (2009) Life cycle assessment for the production of biodiesel: a case study in Malaysia for palm oil versus jatropha oil. Biofuels Bioprod Bioref 3(6):601–612. https://doi.org/10.1002/bbb.182
Kaewcharoensombat U, Prommetta K, Srinophakun T (2011) Life cycle assessment of biodiesel production from jatropha. J Taiwan Inst Chem Eng 42(3):454–462. https://doi.org/10.1016/j.jtice.2010.09.008
Jingura RM, Kamusoko R (2016) Evaluation of life-cycle assessment of Jatropha biodiesel. Energ Source Part B 11(1–6):396–403. https://doi.org/10.1080/15567249.2011.637546
Siregar K, Tambunan AH, Irwanto AK, Wirawan SS, Araki T (2015) A comparison of life cycle assessment on oil palm (Elaeis guineensis Jacq.) and physic nut (Jatropha curcas Linn.) as feedstock for biodiesel production in Indonesia. Energy Procedia 65:170–179. https://doi.org/10.1016/j.egypro.2015.01.054
Mediboyina MK, Banuvalli BK, Chauhan VS, Mudliar SN (2020) Comparative life cycle assessment of autotrophic cultivation of Scenedesmus dimorphus in raceway pond coupled to biodiesel and biogas production. Bioprocess Biosyst Eng 43(2):233–247. https://doi.org/10.1007/s00449-019-02220-8
Mu D, Xin C, Zhou W (2020) Life cycle assessment and techno-economic analysis of algal biofuel production. In: Yousuf A (ed) Microalgae Cultivation for Biofuels Production. Academic Press, pp 281–292
Carvalho FS, Fornasier F, Leitão JOM, Moraes JAR, Schneider RCS (2019) Life cycle assessment of biodiesel production from solaris seed tobacco. J Cleaner Prod 230:1085–1095. https://doi.org/10.1016/j.jclepro.2019.05.177
Marinković DM, Stanković MV, Veličković AV, Avramović JM, Miladinović MR, Stamenković OO, Veljković VB, Jovanović DM (2016) Calcium oxide as a promising heterogeneous catalyst for biodiesel production: current state and perspectives. Renew Sust Energ Rev 56:1387–1408. https://doi.org/10.1016/j.rser.2015.12.007
Chen W, Wu Z, Wang Z, Chen C, Zhang Z (2022) Preparation of a reusable and pore size controllable porous polymer monolith and its catalysis of biodiesel synthesis. RSC Adv 12(20):12363–12370. https://doi.org/10.1039/D2RA01610A
Sahu G, Gupta NK, Kotha A, Saha S, Datta S, Chavan P, Kumari N, Dutta P (2018) A review on biodiesel production through heterogeneous catalysis route. ChemBioEng Rev 5(4):231–252. https://doi.org/10.1002/cben.201700014
Martin K (2002) Green catalysts for industry. in: D.J.M. James H. Clark (ed), Handbook of Green Chemistry and Technology, Wiley-Blackwell, Oxford, UK, 321–336
Liu X, Piao X, Wang Y, Zhu S, He H (2008) Calcium methoxide as a solid base catalyst for the transesterification of soybean oil to biodiesel with methanol. Fuel 87(7):1076–1082. https://doi.org/10.1016/j.fuel.2007.05.059
Teo SH, Islam A, Yusaf T, Taufiq-Yap YH (2014) Transesterification of nannochloropsis oculata microalga’s oil to biodiesel using calcium methoxide catalyst. Energy 78:63–71. https://doi.org/10.1016/j.energy.2014.07.045
Martyanov IN, Sayari A (2008) Comparative study of triglyceride transesterification in the presence of catalytic amounts of sodium, magnesium, and calcium methoxides. Appl Catal A 339(1):45–52. https://doi.org/10.1016/j.apcata.2008.01.007
Theam KL, Islam A, Choo YM, Taufiq-Yap YH (2015) Biodiesel from low cost palm stearin using metal doped methoxide solid catalyst. Ind Crops Prod 76:281–289. https://doi.org/10.1016/j.indcrop.2015.06.058
Peñarrubia Fernandez IA, Liu D, Zhao J (2017) LCA studies comparing alkaline and immobilized enzyme catalyst processes for biodiesel production under Brazilian conditions. Resour Conserv Recycl 119:117–127. https://doi.org/10.1016/j.resconrec.2016.05.009
Liu Y, Yang X, Adamu A, Zhu Z (2021) Economic evaluation and production process simulation of biodiesel production from waste cooking oil. Curr Res Green Sustain Chem 4:100091. https://doi.org/10.1016/j.crgsc.2021.100091
Intarapong P (2016) Comparative life cycle assessment of diesel production from crude palm oil and waste cooking oil via pyrolysis. Int J Energy Res 40(5):702–713. https://doi.org/10.1002/er.3433
Zhao Y, Wang C, Zhang L, Chang Y, Hao Y (2021) Converting waste cooking oil to biodiesel in China: environmental impacts and economic feasibility. Renew Sust Energ Rev 140:110661. https://doi.org/10.1016/j.rser.2020.110661
Varanda MG, Pinto G, Martins F (2011) Life cycle analysis of biodiesel production. Fuel Process Technol 92(5):1087–1094. https://doi.org/10.1016/j.fuproc.2011.01.003
Ocampo Batlle EA, Escobar Palacio JC, Silva Lora EE, Da Costa BE, Horta Nogueira LA, Carrillo Caballero GE, Vitoriano Julio AA, Escorcia YC (2021) Energy, economic, and environmental assessment of the integrated production of palm oil biodiesel and sugarcane ethanol. J Clean Prod 311:127638. https://doi.org/10.1016/j.jclepro.2021.127638
Liu S, Liu J, Gao Y, Xi B, Jia L (2021) Environmental performance of soapberry (sapindus mukorossi gaertn.) cultivation in southeast China based on a life cycle sssessment: a potential feedstock for forest-based biodiesel. Environ Sci https://doi.org/10.21203/rs.3.rs-196826/v1
Teo SH, Rashid U, Taufiq-Yap YH (2014) Green nano-catalyst for methanolysis of non-edible Jatropha oil. Energy Convers Manag 87:618–627. https://doi.org/10.1016/j.enconman.2014.07.048
Jean Ntaganda AN, Benimana O (2014) Characterization of physical and chemical properties of biodiesel produced from Jatropha curcas seeds oil cultivated in Rwanda. Sci J Energy Eng 2(2):8–12. https://doi.org/10.11648/j.sjee.20140202.11
Deng X, Fang Z, Liu YH (2010) Ultrasonic transesterification of Jatropha curcas L. oil to biodiesel by a two-step process. Energy Convers Manag 51(12):2802–2807. https://doi.org/10.1016/j.enconman.2010.06.017
Wang Z, Wei W, Calderon M, Liao X (2019) Impacts of biofuel policy on the regional economy and carbon emission reduction in Yunnan. China Energy Environ 30(5):930–948. https://doi.org/10.1177/0958305X18813729
Guo S, Yang Z, Gao Y (2016) Effect of adding biodiesel to diesel on the physical and chemical properties and engine performance of fuel blends. J Biobased Mater Bioenergy 10(1):34–43. https://doi.org/10.1166/jbmb.2016.1566
Kalaivani K, Balasubramanian N (2015) Energy consumption and greenhouse gas emission studies of Jatropha biodiesel pathway by life cycle assessment in India. Indian Chem Eng 58(3):1–13. https://doi.org/10.1080/00194506.2015.1044025
Kumar S, Chaube A, Jain SK (2010) Performance analysis of a single-cylinder four-stroke diesel engine operating with diesel blended with Jatropha biodiesel. Asian J Exp Sci 685-695.https://doi.org/10.1007/978-981-16-7909-4_63
Jain S, Sharma MP (2010) Prospects of biodiesel from Jatropha in India: a review. Renew Sust Energ Rev 14(2):763–771. https://doi.org/10.1016/j.rser.2009.10.005
Obligado A, Demafelis R, Matanguihan A, Villancio V, Magadia JR, Manaig L (2021) Carbon emission inventory of a commercial-scale Jatropha (Jatropha curcas L.) biodiesel processing plant. J Environ Sci Manag 1:20–32. https://doi.org/10.47125/jesam/2017_sp1/03
Khang DS, Tan RR, Uy OM, Promentilla MAB, Tuan PD, Abe N, Razon LF (2017) Design of experiments for global sensitivity analysis in life cycle assessment: the case of biodiesel in Vietnam. Resour Conserv Recycl 119:12–23. https://doi.org/10.1016/j.resconrec.2016.08.016
Sun J, Xiong X, Wang M, Du H, Li J, Zhou D, Zuo J (2019) Microalgae biodiesel production in China: a preliminary economic analysis. Renew Sust Energ Rev 104:296–306. https://doi.org/10.1016/j.rser.2019.01.021
Aghbashlo M, Tabatabaei M, Rastegari H, Ghaziaskar HS, Roodbar Shojaei T (2018) On the exergetic optimization of solketalacetin synthesis as a green fuel additive through ketalization of glycerol-derived monoacetin with acetone. Renew Energ 126:242–253. https://doi.org/10.1016/j.renene.2018.03.047
Aghbashlo M, Tabatabaei M, Rastegari H, Ghaziaskar HS, Valijanian E (2018) Exergy-based optimization of a continuous reactor applied to produce value-added chemicals from glycerol through esterification with acetic acid. Energy 150:351–362. https://doi.org/10.1016/j.energy.2018.02.151
Aghbashlo M, Tabatabaei M, Rastegari H, Ghaziaskar HS (2018) Exergy-based sustainability analysis of acetins synthesis through continuous esterification of glycerol in acetic acid using Amberlyst®36 as catalyst. J Cleaner Prod 183:1265–1275. https://doi.org/10.1016/j.jclepro.2018.02.218
Leng R, Wang C, Cheng Z, Du D, Pu G (2008) Life cycle inventory and energy analysis of cassava-based fuel ethanol in China. J Cleaner Prod 16(3):374–384. https://doi.org/10.1016/j.jclepro.2006.12.003
Cai B, Zhu S, Yu S, Dong H, Zhang C, Wang C (2019) The interpretation of 2019 refinement to the 2006 IPCC guidelines for national greenhouse gas inventory. Environ Eng 37(8):1–11. https://doi.org/10.21513/0207-2564-2019-2-05-13
Sesana MM, Salvalai G (2013) Overview on life cycle methodologies and economic feasibility for nZEBs. Build Environ 67:211–216. https://doi.org/10.1016/j.buildenv.2013.05.022
Portugal-Pereira J, Nakatani J, Kurisu KH, Hanaki K (2015) Comparative energy and environmental analysis of Jatropha bioelectricity versus biodiesel production in remote areas. Energy 83(1):284–293. https://doi.org/10.1016/j.energy.2015.02.022
Wani S, Tk S, Subramanian M, Rao A, Challagulla V (2009) Harnessing the potential of Jatropha and pongamia plantations for improving livelihoods and rehabilitating degraded lands. In: 6th International Biofuels Conference, 4–5 March, New Delhi, India.
Wang Z, Calderon MM, Ying L (2011) Life cycle assessment of the economic, environmental and energy performance of Jatropha curcas L. biodiesel in China. Biomass Bioener 35(7):2893–2902. https://doi.org/10.1016/j.biombioe.2011.03.031
Gerbens-Leenes W, Hoekstra AY, Meer TH (2009) The water footprint of bioenergy. Proc Nati Acad Sci 106(25):10219. https://doi.org/10.1073/pnas.0812619106
Xie X, Zhang T, Wang L, Huang Z (2017) Regional water footprints of potential biofuel production in China. Biotechnol Biofuels 10(1):95. https://doi.org/10.1186/s13068-017-0778-0
Maiti S, Bapat P, Das Ghosh PK (2014) Feasibility study of jatropha shell gasification for captive power generation in biodiesel production process from whole dry fruits. Fuel 121:126–132. https://doi.org/10.1016/j.fuel.2013.12.048
Pinto LF, Ndiaye PM, Ramos LP, Corazza ML (2011) Phase equilibrium data of the system CO2 + glycerol + methanol at high pressures. J Supercrit Fluids 59:1–7. https://doi.org/10.1016/j.supflu.2011.08.002
Forsberg G (2000) Biomass energy transport. Biomass Bioener 19(1):17–30. https://doi.org/10.1016/S0961-9534(00)00020-9
Zhang H, Wang S, Li Z, Ni W (2005) Well-to-tank life cycle assessment for coal derived methanol fuel. J Tsinghua Univ (Sci Technol) 45(11):1569–1572. https://doi.org/10.1055/s-2004-832487
Yan JH, Wang SX, Yuan HR, Chen Y, Shan R (2017) Life cycle assessment of biodiesel produced from soybean and waste cooking oil. Adv New Renew Energ 5:279–285 (in Chinese)
Li L, Ma X, Xie M, Liao Y (2015) Full life cycle assessment on wind power generation system. Compressor, Blower Fan Technology 57(2):65–70. https://doi.org/10.16492/j.fjjs.2015.02.067 (in Chinese)
Wang X (2012) Analysis on environmental benefit of wind turbines using life cycle assessment-case study of some wind farm in inner mongolia. Sci Technol Manag Res 32(18):259–262 (in Chinese)
Zou Z, Ma X, Zhao Z, Li H, Chen Y (2004) Life cycle assessment on the hydropower project. Water Power 4(53–55):62 (in Chinese)
Zhang Z, Zhu Z, Shen B, Liu L (2019) Insights into biochar and hydrochar production and applications: a review. Energy 171:581–598. https://doi.org/10.1016/j.energy.2019.01.035
Sharma R, Narang S (2015) Performance and emission analysis of palm and jatropha biofuel blends with diesel on an unmodified CI Engine. Int J Res Eng Appl Sci 5(10):58–65. https://doi.org/10.1016/j.indcrop.2014.05.001
Martinez A, Mijangos GE, Romero-Ibarra IC, Hernandez-Altamirano R, Mena-Cervantes VY (2019) In-situ transesterification of Jatropha curcas L. seeds using homogeneous and heterogeneous basic catalysts. Fuel 235(1):277–287. https://doi.org/10.1016/j.fuel.2018.07.082
Banković-Ilić IB, Miladinović MR, Stamenković OS, Veljković VB (2017) Application of nano CaO–based catalysts in biodiesel synthesis. Renew Sust Energ Rev 72:746–760. https://doi.org/10.1016/j.rser.2017.01.076
Zhang H, Song Y (2010) Application of transesterification for the production of biodiesel. Eng Sci 12(1):24–29. https://doi.org/10.1097/00000539-200010000-00031
Xing A, Ma J, Zhang Y, Wang Y, Jin Y (2010) Life cycle assessment of resource and energy consumption for production of biodiesel. Chin J Process Eng 10(2):314–320 (in Chinese)
Doongar Chaudhary JC, Gandhi M, Ghosh A (2008) Basic data for Jatropha production and use. Updated version. https://www.researchgate.net/publication/235545319 Basic Data for Jatrapha Production and Use. [accessed 26 August 2022].
Yusuf NNAN, Kamarudin SK (2013) Techno-economic analysis of biodiesel production from Jatropha curcas via a supercritical methanol process. Energy Convers Manag 75(nov):710–717. https://doi.org/10.1016/j.enconman.2013.08.017
Wang W, Xie H, Zhang N, Xiang D (2016) Sustainable water use and water shadow price in China’s urban industry. Resour Conserv Recycl S0921344916302385.https://doi.org/10.1016/j.resconrec.2016.09.005
Morales M, Hélias A (2019) Bernard Optimal integration of microalgae production with photovoltaic panels: environmental impacts and energy balance. Biotechnol Biofuels 12(1):239. https://doi.org/10.1016/j.resconrec.2016.09.005
Vries S, Ven G, Ittersum M, Giller KE (2010) Resource use efficiency and environmental performance of nine major biofuel crops, processed by first-generation conversion techniques. Biomass Bioener 34(5):588–601. https://doi.org/10.1016/j.biombioe.2010.01.001
Xia W, Li G, Shen L, Yan W, Liu J (2009) Study on the developing trend of fuel ethanol and ethanol gasoline for motor vehicles. Appl Chem Ind 38:1059–1063 (in Chinese)
Mohammadshirazi A, Akram A, Rafiee S, Kalhor EB (2014) Energy and cost analyses of biodiesel production from waste cooking oil. Renew Sust Energy Rev 33:44–49. https://doi.org/10.1016/j.rser.2014.01.067
Howard P, Harnoor D, Marissa R (2013) Algae biodiesel life cycle assessment using current commercial data. J Environ Manage 129:103–111. https://doi.org/10.1016/j.jenvman.2013.06.055
Zhu Z, Liu Y, Cong W, Zhao X, Fang Z (2021) Soybean biodiesel production using synergistic CaO/Ag nano catalyst: process optimization, kinetic study, and economic evaluation. Ind Crops Prod 166(166):113479. https://doi.org/10.1016/j.indcrop.2021.113479
Zhao Y, Ang CW, Zhang L, Chang Y, Hao Y (2021) Converting waste cooking oil to biodiesel in China: environmental impacts and economic feasibility. Renew Sust Energ Rev 140(3):110661. https://doi.org/10.1016/j.rser.2020.110661
Hao M, Chen Y, Ding H, Li Y, Xu Z, Li W (2020) Feedstocks, environmental effects and development suggestions for biodiesel in China. J Traffic Transp Eng (English Edition) 42(6):68–84. https://doi.org/10.1016/j.jtte.2020.10.001
Yang X, Liu Y, Zhu Z (2020) Life cycle assessment of biodiesel from soybean oil and waste oil. Nongye Gongcheng Xuebao/Trans Chin Soc Agric Eng 36(19):233–239. https://doi.org/10.11975/j.issn.1002-6819.2020.19.027 (in Chinese)
Luo Y, Wang X, Yuan X (2018) Energy and carbon balances in microalgae biodiesel. Biochem Eng J 58(3):324–329. https://doi.org/10.16511/j.cnki.qhdxxb.2018.25.009 (in Chinese)
Huang J, Shi Y, Wang R, Ni X, Xie J (2013) Preliminary study on the application performance of a new environmentally friendly and nitrogen-saving fertilizer-urea ammonium on late rice. Environ Pollut Control 35(3):72–74 (in Chinese)
Wang W (2020) Optimization of coal-to-methanol production process and energy-saving emission reduction measures. Chem Eng Des Commun 46(7):10–28. https://doi.org/10.3969/j.issn.1003-6490.2020.07.007
Shi C, Labbaf B, Mostafavi E, Mahinpey N (2020) Methanol production from water electrolysis and tri-reforming: process design and technical-economic analysis. J CO2 Util 38:241–251. https://doi.org/10.1016/j.jcou.2019.12.022
Lu H, Wang Z, Dai H (2012) Experimental study on direct biomass reburning denitrification. Adv Mater Res 424:1297–1300. https://doi.org/10.4028/www.scientific.net/AMR.424-425.1297
Wang SQ, Liu MZ, Sun LL, Cheng WL (2017) Study on the mechanism of desulfurization and denitrification catalyzed by TiO2 in the combustion with biomass and coal. Korean J Chem Eng 34:1882–1888. https://doi.org/10.1007/s11814-017-0051-z
Hu Z, Tan P, Lou D (2011) Environmental impact characteristics of common rail diesel engine fueled with jatropha biodiesel blends. Chin Intern Combust Engine Eng 32(4):65–71. https://doi.org/10.1007/s12182-011-0123-3
Dong J, Ma X (2007) Life cycle assessment on biodiesel production. Modern Chemical Industry 27(9):59–63. https://doi.org/10.3321/j.issn:0253-4320.2007.09.017(inChinese)
Singh D, Singal SK, Garg MO, Maiti P, Mishra S, Ghosh PK (2015) Transient performance and emission characteristics of a heavy-duty diesel engine fuelled with microalga Chlorella variabilis and Jatropha curcas biodiesels. Energy Convers Manag 106:892–900. https://doi.org/10.1016/j.enconman.2015.10.023
Jain S, Sharma MP (2013) Engine performance and emission analysis using oxidatively stabilized Jatropha curcas biodiesel. Fuel 106:152–156. https://doi.org/10.1016/j.fuel.2012.11.076
Gad MS, Jayaraj S (2020) A comparative study on the effect of nano-additives on the performance and emissions of a diesel engine run on Jatropha biodiesel. Fuel 267:117168. https://doi.org/10.1016/j.fuel.2020.117168
Wright L, Boundy B, Perlack B, Davis S (2006) Biomass Energy Data Book (Edition One), Energy Efficiency and Renew. Energ, U.S. Department of Energy. https://www.osti.gov/biblio/930823-biomass-energy-data-book-edition. [accessed 26 August 2022]
Chua CBH, Hui ML, Low JSC (2010) Life cycle emissions and energy study of biodiesel derived from waste cooking oil and diesel in Singapore. Int J Life Cycle Assess 15(4):417–423. https://doi.org/10.1007/s11367-010-0166-5
Liao Y, Huang Z, Ma X (2012) Energy analysis and environmental impacts of microalgal biodiesel in China. Energy Policy 45:142–151. https://doi.org/10.1016/j.enpol.2012.02.007
Sampattagul S, Suttibut C, Kiatsiriroat T (2009) LCA/LCC of Jatropha biodiesel production in Thailand. Int J Renew Energ Technol 4(1):33–42. https://doi.org/10.14456/iire. 2009.1
US Department of Agricultural Foreign Agricultural Service. (2020) Oil seeds: world markets and trade. https://www.fas.usdagov/data/oilseeds-world-markets-and-trade. [accessed 26 August 2022]
Leung DYC, Wu X, Leung MKH (2010) A review on biodiesel production using catalyzed transesterification. Appl Energy 87(4):1083–1095. https://doi.org/10.1016/j.apenergy.2009.10.006
Shankar AA, Pentapati PR, Prasad RK (2017) Biodiesel synthesis from cottonseed oil using homogeneous alkali catalyst and using heterogeneous multi walled carbon nanotubes: Characterization and blending studies. Egypt J Pet 26(1):125–133. https://doi.org/10.1016/j.ejpe.2016.04.001
Ullah Z, Bustam MA, Man Z (2015) Biodiesel production from waste cooking oil by acidic ionic liquid as a catalyst. Renew Energ 77:521–526. https://doi.org/10.1016/j.renene.2014.12.040
Araújo CDMd, Andrade CCd, EdSe S, Dupas FA (2013) Biodiesel production from used cooking oil: a review. Renew Sust Energ Rev 27:445–452. https://doi.org/10.1016/j.rser.2013.06.014
Baral NR, Neupan P, Ale BB, Quiroz-Arita C, Manandhar S, Bradley TH (2020) Stochastic economic and environmental footprints of biodiesel production from Jatropha curcas Linnaeus in the different federal states of Nepal. Renew Sust Energ Rev 120:109619. https://doi.org/10.1016/j.rser.2019.109619
Quintero JA, Felix ER, Rincon LE, Crisspin M, Baca JF, Khwaja Y, Cardona CA (2012) Social and techno-economical analysis of biodiesel production in Peru. Energy Policy 43:427–435. https://doi.org/10.1016/j.enpol.2012.01.029
Lim BY, Shamsudin R, Baharudin BTHT, Yunus R (2016) Performance evaluation and cfd multiphase modeling for multistage Jatropha fruit shelling machine. Ind Crops Prod 85:125–138. https://doi.org/10.1016/j.indcrop.2016.02.057
Nanda MR, Yuan Z, Qin W, Poirier MA, Chun X (2014) Purification of crude glycerol using acidification: effects of acid types and product characterization. Austin J Chem Eng 1:1–7
Zhang C, Lu Z, Liu Z, Xiao N (2015) Uncertainty analysis and global sensitivity analysis of techno-economic assessments for biodiesel production. Bioresour Technol 175:502–508. https://doi.org/10.1016/j.biortech.2014.10.162
ISO (2006) ISO 14044: environmental management: life cycle assessment-requirements and guidelines, Second edition Geneva: International Standardization Organization. http://www.nssi.org.cn/nssi/front/111357703.html. [accessed 26 August 2022]
Jian H, Zhang P, Yuan X, Zheng Y (2011) Life cycle assessment of biodiesel from soybean, jatropha and microalgae in China conditions. Renew Sust Energ Rev 15(9):5081–5091. https://doi.org/10.1016/j.rser.2011.07.048
Ong HC, Mahlia T, Masjuki HH, Honnery D (2012) Life cycle cost and sensitivity analysis of palm biodiesel production. Fuel 98:131–139. https://doi.org/10.1016/j.fuel.2012.03.031
Tabatabaei M, Aghbashlo M, Dehhaghi M, Panahi HKS, Mollahossein A, Hosseini M, Soufiyan MM (2019) Reactor technologies for biodiesel production and processing: a review. Prog Energy Combust Sci 74:239–303. https://doi.org/10.1016/j.pecs.2019.06.001
Gebremariam SN, Marchetti JM (2018) Economics of biodiesel production: review. Energy Convers Manag 168:74–84. https://doi.org/10.1016/j.enconman.2018.05.002
André Cremonez P, Feroldi M, Cézar Nadaleti W, de Rossi E, Feiden A, de Camargo MP, Cremonez FE, Klajn FF (2015) Biodiesel production in Brazil: current scenario and perspectives. Renew Sust Energ Rev 42:415–428. https://doi.org/10.1016/j.rser.2014.10.004
Ewunie G, Morken J, Lekang OI, Yigezu ZD (2021) Factors affecting the potential of Jatropha curcas for sustainable biodiesel production: a critical review. Renew Sust Energ Rev 137:110500. https://doi.org/10.1016/j.rser.2020.110500
Castro G, Nirza F (2016) International experiences with the cultivation of Jatropha curcas for biodiesel production. Energy 112:1245–1258. https://doi.org/10.1016/j.energy.2016.06.073
Negash M, Riera O (2014) Biodiesel value chain and access to energy in Ethiopia: policies and business prospects. Renew Sust Energ Rev 39(nov.):975–985. https://doi.org/10.1016/j.rser.2014.07.152
Lama AD, Klemola T, Saloniemi I, Niemelä P, Vuorisalo T (2018) Factors affecting genetic and seed yield variability of Jatropha curcas (L.) across the globe: a review. Energy Sustain Dev 42:170–182. https://doi.org/10.1016/j.esd.2017.09.002
Sushma, (2014) Analysis of oil content of Jatropha curcas seeds under storage condition. J Environ Biol 35(3):571–575. https://doi.org/10.1117/1.JRS.8.083641
Francis G, Edinger R, Becker K (2005) A concept for simultaneous wasteland reclamation, fuel production, and socio-economic development in degraded areas in India: need, potential and perspectives of Jatropha plantations. Nat Resour Forum 29(1):12–24. https://doi.org/10.1111/j.1477-8947.2005.00109.x
Jonas M, Etlogetswe CK, Gandure J (2020) Effect of fruit maturity stage on some physicochemical properties of Jatropha seed oil and derived biodiesel. ACS Omega 5(23):13473–13481. https://doi.org/10.1021/acsomega.9b03965
Shamsi M, Babazadeh R (2022) Estimation and prediction of Jatropha cultivation areas in China and India. Renew Energ 183:548–560. https://doi.org/10.1016/j.renene.2021.10.104
Escalante E, Ramos LS, Coronado CR, Andrade D (2022) Evaluation of the potential feedstock for biojet fuel production: focus in the Brazilian context. Renew Sust Energ Rev 153:1111716. https://doi.org/10.1016/j.rser.2021.111716
Rosado TB, Laviola BG, Faria DA, Pappas MR, Bhering LL, Quirino B, Grattapaglia D (2010) Molecular markers reveal limited genetic diversity in a large germplasm collection of the biofuel crop Jatropha curcas L. Brazil Crop Sci 50(6):2372–2382. https://doi.org/10.2135/cropsci2010.02.0112
Balat M, Balat H (2010) Progress in biodiesel processing. Appl Energy 87(6):1815–1835. https://doi.org/10.1016/j.apenergy.2010.01.012
Ali M, Akbar N (2020) Biofuel is a renewable environment friendly alternate energy source for the future. Model Earth Syst Environ 6(1):1–9. https://doi.org/10.1007/s40808-019-00702-y
Naresh B, Reddy MS, Vijayalakshmi P, Reddy V, Devi P (2012) Physico-chemical screening of accessions of Jatropha curcas for biodiesel production. Biomass Bioener 40:155–161. https://doi.org/10.1016/j.biombioe.2012.02.012
Shamsi M, Babazadeh R (2021) Estimation and prediction of Jatropha cultivation areas in China and India. Renew Energ 183:548–560. https://doi.org/10.1016/j.renene.2021.10.104
Ntaribi T, Paul DI (2018) Status of Jatropha plants farming for biodiesel production in Rwanda. Energy Sustain Dev 47:133–142. https://doi.org/10.1016/j.esd.2018.09.009
Ntaribi T, Paul DI (2019) The economic feasibility of Jatropha cultivation for biodiesel production in Rwanda: a case study of Kirehe district. Energy Sustain Dev 50:27–37. https://doi.org/10.1016/j.esd.2019.03.001
Soto I, Ellison C, Kenis M, Diaz B, Muys B, Mathijs E (2018) Why do farmers abandon jatropha cultivation? The case of Chiapas, Mexico. Energy Sustain Dev 42:77–86. https://doi.org/10.1016/j.esd.2017.10.004
Cortez J, Gutierrez E, Mena-Cervantes VY, Teran A, Velasco J (2020) A GIS approach land suitability and availability analysis of Jatropha curcas L. growth in Mexico as potential source for biodiesel production. Energies 13(22):5888. https://doi.org/10.3390/en13225888
Openshaw K (2000) A review of Jatropha curcas: an oil plant of unfulfilled promise. Biomass Bioener 19(1):1–15. https://doi.org/10.1016/S0961-9534(00)00019-2
Kgathi DL, Mmopelwa G, Chanda R, Kashe K, Murray-Hudson M (2017) A review of the sustainability of Jatropha cultivation projects for biodiesel production in southern Africa: Implications for energy policy in Botswana. Agric Ecosyst Environ 246:314–324. https://doi.org/10.1016/j.agee.2017.06.014
Ahmed A, Campion BB, Gasparatos A (2017) Biofuel development in Ghana: policies of expansion and drivers of failure in the jatropha sector. Renew Sust Energ Rev 70:133–149. https://doi.org/10.1016/j.rser.2016.11.216
Nygaard I, Bolwig S (2018) The rise and fall of foreign private investment in the jatropha biofuel value chain in Ghana. Environ Sci Policy 84:224–234. https://doi.org/10.1016/j.envsci.2017.08.007
Bryant ST, Romijn HA (2014) Not quite the end for Jatropha? Assessing the financial viability of biodiesel production from Jatropha in Tanzania. Energy Sustainable Dev 23:212–219. https://doi.org/10.1016/j.esd.2014.09.006
Olotu M (2020) Socio-economic impact of Jatropha-based biofuel promotion on rural livelihoods in northern Tanzania. https://doi.org/10.21203/rs.3.rs-25918/v1
Axelsson L, Franzén M (2010) Performance of Jatropha biodiesel production and its environmental and socio-economic impacts. World Renew Energy Congr 13(1):57–60. https://doi.org/10.3384/ecp110572470
Baral NR, Neupane P, Ale BB, Quiroz-Arita C, Manandhar S, Bradley TH (2020) Stochastic economic and environmental footprints of biodiesel production from Jatropha curcas Linnaeus in the different federal states of Nepal. Renew Sust Energ Rev 120:109619. https://doi.org/10.1016/j.rser.2019.109619
Ahmad T, Danish M, Kale P, Geremew B, Adeloju SB, Nizami M, Ayoub M (2019) Optimization of process variables for biodiesel production by transesterification of flaxseed oil and produced biodiesel characterizations. Renewable Energy 139:1272–1280. https://doi.org/10.1016/j.renene.2019.03.036
Rosen MA (2018) Environmental sustainability tools in the biofuel industry. Biofuel Res J 5(1):751–752. https://doi.org/10.18331/BRJ2018.5.1.2
Dadak A, Aghbashlo M, Tabatabaei M, Najafpour G, Younesi H (2016) Sustainability assessment of photobiological hydrogen production using anaerobic bacteria (Rhodospirillum rubrum) via exergy concept: effect of substrate concentrations. Environ Prog Sustain Energy 35(4):1166–1176. https://doi.org/10.1002/ep.12296
Reza B, Sadiq R, Hewage K (2014) Emergy-based life cycle assessment (Em-LCA) for sustainability appraisal of infrastructure systems: a case study on paved roads. Clean Technol Environ Policy 16(2):251–266. https://doi.org/10.1007/s10098-013-0615-5
Whiting K, Carmona LG, Sousa T (2017) A review of the use of exergy to evaluate the sustainability of fossil fuels and non-fuel mineral depletion. Renew Sust Energ Rev 76:202–211. https://doi.org/10.1016/j.rser.2017.03.059
Aghbashlo M, Khounani Z, Hosseinzadeh-Bandbafha H, Gupta VK, Tabatabaei M (2021) Exergoenvironmental analysis of bioenergy systems: a comprehensive review. Renew Sust Energ Rev 149(1):111399. https://doi.org/10.1016/j.rser.2021.111399
Meyer L, Tsatsaronis G, Buchgeister J, Schebek L (2009) Exergoenvironmental analysis for evaluation of the environmental impact of energy conversion systems. Energy 34(1):75–89. https://doi.org/10.1016/j.energy.2008.07.018
Aghbashlo M, Tabatabaei M, Hosseinpour S (2018) On the exergoeconomic and exergoenvironmental evaluation and optimization of biodiesel synthesis from waste cooking oil (WCO) using a low power, high frequency ultrasonic reactor. Energy Convers Manage 164:385–398. https://doi.org/10.1016/j.enconman.2018.02.086
Funding
This study received financial supports from the Jiangsu University of Science and Technology (1142931706) and the Natural Science Foundation of the Higher Education Institution of Jiangsu Province (20KJB480009).
Author information
Authors and Affiliations
Contributions
Yanbing Liu: investigation, methodology, writing—original draft, writing—review. Zongyuan Zhu: conceptualization, writing—review and editing. Rui Zhang: writing—review. Xubo Zhao: writing—review.
Corresponding author
Ethics declarations
Ethics approval and consent to participate
Not applicable.
Conflict of interest
The authors declare no competing interests.
Additional information
Publisher's note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Highlights
• LCA was integrated with LCC to assess environmental and economic impacts of Jatropha biodiesel.
• Fertilizer, Jatropha shell combustion, and methanol production are the main sources of pollution.
• 1 ton of Jatropha biodiesel needs 17566.16 MJ of total energy input.
• The cost of Jatropha biodiesel in China is 796.32 USD/ton.
• 44.37% of biodiesel cost is caused by the cost of feedstock oil.
Appendices
Appendix A Pollutant emissions and energy consumption calculations
Pollutant emissions and energy consumption calculations at different stages in the life cycle assessment of Jatropha biodiesel are presented in the following subsections.
-
1.
Fertilizer use: the emissions of pollutants during the use of fertilizers were referenced from Ref [71], which are listed in the following table.
Table 15
In the research of this article, 2.68 t of Jatropha seeds need 51.99 kg of nitrogen fertilizer, 14.47 kg of P2O5, and 9.648 kg of K2O. Take CO2 emission and energy consumption as examples for calculation:
-
2.
Oil extraction
In the process of oil extraction, it consumes 7.93 kW·h of electricity. Ref [71] showed that 1 kW \(\bullet\) h of electricity consumption contributed to 413.452 g of CO2, 1.268 g of SO2, 0.532 g of NOx, 0.004 g of CH4, 0.041 g of CO, and 0.053 g of dust (PM10). When calculating energy consumption, 1 kW·h = 3600 kJ.
For example:
-
3.
Combustion of Jatropha shell
In this article, 2.68 t of Jatropha seeds produce 1.072 t of shells. According to Ref [79], the calorific value of Jatropha shell is 17.22 MJ/kg, so the energy produced from the combustion of 1.072 t of shells is: 17.22 × 1072 = 18459.84 MJ. Because 1 kW·h = 3600 kJ, 18459.84 MJ = 5127.733 kW·h. The electric energy conversion efficiency is 24.5% [79], thus the electric energy generated from Jatropha shell combustion is: 5127.733 kW·h × 24.5% = 1256.29 kW·h.
According to Ref [81], 0.476 t of biomass combustion emit 25 g of SO2 (SOx), 409 g of NOx, 115 g of CO, and 246 g of dust. Therefore 1.072 t of Jatropha shells emit 0.056 kg of SO2 (SOx), 0.921 kg of NOx, 0.259 kg of CO, and 0.554 kg of dust. Take SO2 emission as an example for calculation:
-
4.
Production of Ca(OCH3)2 catalyst
In the process of catalyst production, it consumes 25 kW·h of electricity. Ref [71] showed that 1 kW \(\bullet\) h of electricity consumption contributed to 413.452 g of CO2, 1.268 g of SO2, 0.532 g of NOx, 0.004 g of CH4, 0.041 g of CO, and 0.053 g of dust (PM10). When calculating energy consumption, 1 kW·h = 3600 kJ.
For example:
-
5.
Methanol production
Ref [82] indicated that the production of 1 kg of methanol requires 8.205 MJ of energy; thus, 502.17 kg of methanol consumes 4120.30 MJ of energy.
The production of 1 MJ methanol emits 0.1936 g of CO2, 0.119 g of SO2, 0.299 g of NOx, 0.0036 g of CH4, 0.009 g of CO, and 0.492 g of dust into the environment [83].
Take CO2 emission as an example for calculation: 0.1936 × 10545.57 = 2041.62 g = 2.0416 kg.
-
6.
Biodiesel production
In the process of biodiesel production, it consumes 34.2 kW·h of electricity. Ref [71] showed that 1 kW \(\bullet\) h of electricity consumption contributed to 413.452 g of CO2, 1.268 g of SO2, 0.532 g of NOx, 0.004 g of CH4, 0.041 g of CO, and 0.053 g of dust (PM10). When calculating energy consumption, 1 kW·h = 3600 kJ.
For example:
-
7.
Total transport
The transportation process includes the transportations of Jatropha seeds, seed cake, biodiesel and glycerol in which each transportation distance is 50 km. The reference value and the article value are listed in the table below:
Table 16
The transportations include 2.68 t of Jatropha, 0.804 t of seed cake, 0.076 t of fertilizer, 1 t of biodiesel, 0.1055 t of glycerol, and the total mass is 4.6655 t.
CO2 emission: 1620.6 kg/104 t·km × 4.6655 t × 50 km = 37.81 kg (other pollutant emissions calculations are the same).
Diesel consumption: 0.0482 L/(t·km) × 4.6655 t × 50 km = 11.24 L.
Energy: the quality of diesel consumption = 11.24 L × 0.9 kg/L = 10.12 kg, thus the transportation energy = 46.04 MJ/kg × 10.12 kg = 465.91 MJ.
Appendix B Life cycle cost calculations
Cost calculations include Jatropha oil, capital investments, chemical reagents, water resource, energy cost, and human cost are presented in the following subsections.
-
1.
The price of 1.07 t of Jatropha oil refers to the value given in Ref [94], which is 353.32 USD (Coil).
-
2.
In the transesterification stage, 502.17 kg of methanol is consumed, and the price of methanol is 1.7 RMB/kg (East China Port of Methanol Market, China). Therefore, the calculation results of this article are:
-
3.
The method of preparing Ca(OCH3)2 catalyst is referenced from Ref [57]. According to the chemical equation of “2CH3OH + CaO = Ca(OCH3)2 + H2O,” 13.45 kg of methanol and 11.83 kg of CaO are required for producing 21.43 kg of Ca (OCH3)2 catalyst. Since excess methanol is needed to react with calcium oxide, the amount of methanol is increased to 26.9 kg. The price of calcium oxide is 35 RMB/kg (Changshu Sanhe Calcification Company, Jiangsu, China). Therefore, the catalyst cost calculation of this article is:
Therefore, Cr = Coil + Cmethanol + Ccatalyst = 353.32 + 134.44 + 72.41 = 560.17 USD.
-
4.
The biodiesel is washed by water after transesterification. A total volume of 0.37 m3 of water resources is required for 1 t of crude Jatropha biodiesel product, and the industrial water price is 6.86 USD/per cubic meter, according to Ref [95]. Therefore, the cost calculation of water resource after transesterification in this paper is:
-
5.
Electricity consumptions include Jatropha oil extraction, catalysts preparation, and biodiesel production. The electricity consumption is 7.93 kW·h, 25 kW·h, and 34.2 kW·h, respectively. The electricity cost in China Power Grid is 0.6 RMB/kW·h. Therefore, the electricity energy cost calculation in this paper is:
-
6.
Diesel consumptions include the transportations of jatropha oil, biodiesel, and glycerin. A total volume of 5.2430 L of diesel is consumed [84,85,86]. The price of diesel is 5.17 RMB/L; therefore, the calculation results in this paper are:
$${\mathrm{C}}_{\mathrm{diesel}}=5.17\times 5.2430=27.11\mathrm{ RMB}=4.27\mathrm{ USD}$$
Therefore, Co = Cwater + Celectricity + Cdiesel = 2.54 + 6.34 + 4.27 = 13.15 USD.
-
7.
The labor input consists of biodiesel production staff, sales and management staff, and biodiesel transportation and glycerin drivers. Biodiesel production requires two people for 2 days, while sales and management also require two people for 2 days and transportation needs one driver for one day. Therefore, the human cost calculation in this paper is:
-
8.
The capital investment cost is calculated according to the value given in Ref [53]. Therefore, the calculation results of this article are:
Therefore, total cost Ct = Cv + Cf = Cr + Co + Ch + Ce = 560.17 + 13.15 + 212.60 + 10.40 = 796.32 USD.
Table 17
Appendix C Environmental impact load
-
1.
Impact potential = Emission × Effect equivalent factor
Take PMF as an example to calculate: Dust Emissions are 5.86 kg, and the Effect equivalent factor is 1 (PM10eq.), so the Impact potential value calculation:
-
2.
Standardized impact potential = Impact potential ÷ Standardized benchmark
Take PMF as an example to calculate: Impact potential value is 5.86 kg·a−1, and the Standardized benchmark is 18 kg·person−1·a−1, so the Standardized impact potential value calculation:
-
3.
Weighted impact potential = Standardized impact potential × Weight factor
Take PMF as an example to calculate: Standardized impact potential value is 0.33 mPEChina, and the weight factor is 0.61, so the Weighted impact potential value calculation:
Table 18
Appendix D Cost analysis of Jatropha oil
In order to have a better understanding of Jatropha oil cost, its overall cost during plantation and extraction are analysed.
Jatropha plant stage:
1. Fertilizer: 51.99 kg of nitrogen fertilizer, 14.47 kg of P2O5, and 9.648 kg of K2O are needed for producing 2.68 t of Jatropha seeds, which is equivalent to 76.108 kg compound fertilizer. The price of compound fertilizer is 180 RMB/50 kg (one bag). Therefore, fertilizer cost is:
2. Transportation of fertilizer and Jatropha seeds: transporting 76.108 kg of fertilizer and 2.68 t of Jatropha seeds consumes 6.64 L of diesel, thus the transportation cost during seed production is:
3. Labor input: manual weeding, fertilizer application, picking Jatropha seeds and driver are included. Manual weeding requires 2 people a day, and Jatropha picking requires 2 people for 2 days. Fertilizer application and driver transportation need one person a day in total. Therefore, the labor cost during seed production is:
4. Agricultural water: the yield of Jatropha seeds is 5 t/hm2, thus 2.68 t of Jatropha seeds need 0.536 hm2 of land. Agricultural irrigation water costs 16.54 USD/ha (105 RMB/ha) (Jiangsu Provincial Price Bureau). Therefore, the agricultural water cost during the seed production is:
Oil extraction:
1. Electricity consumed by oil extraction: the oil extraction process requires 7.93 kW·h of electricity to process 1.608 t of Jatropha seeds, thus the electricity consumption cost during seed production is:
2. Staff, separation of shell and nut: It takes 2 people 2 days to separate the shells and nuts of Jatropha seeds, and 1 person 2 days to extract the oil. Therefore, the calculation results in this paper are:
3. Transport seed cake back to the field: Transporting 0.804 t seed cake consumes 1.94 L diesel, and the transport driver here is included in the transportation fertilizer calculated above. Therefore, the calculation results in this paper are:
Table 19
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Liu, Y., Zhu, Z., Zhang, R. et al. Life cycle assessment and life cycle cost analysis of Jatropha biodiesel production in China. Biomass Conv. Bioref. (2022). https://doi.org/10.1007/s13399-022-03614-7
Received:
Revised:
Accepted:
Published:
DOI: https://doi.org/10.1007/s13399-022-03614-7