Abstract
The intent of the current study is to develop composite material from biodegradable waste rubber seed shell (RSS) and epoxy resin. The purpose is to enhance the properties of the polymer by reinforcing with RSS filler. The effect of dual pre-treatment on the mechanical, morphological, electrical and thermal properties of RSS through solvent extraction and alkali treatment processes is investigated in the present work. Composite material is developed using 5, 10, 15 and 20 wt% of RSS. Tensile test results show an increase in the tensile strength and Young’s modulus of the treated composite specimens compared to non-treated ones. The pre-treatment of the shell using solvent extraction and alkali treatment shows a considerable reduction in moisture absorption by the composite. Scanning electron microscope observations reveal excellent interaction between the pre-treated RSS and epoxy matrix with the reduction in fiber pullout, micro-spaces and voids. The inclusion of RSS filler does not have significant effect on the thermal stability of the composite. But incorporation of RSS fillers lowers the electrical conductivity of the epoxy matrix. Thus, rubber seed shell-reinforced epoxy composites are expected to be effective in reducing agricultural waste and may find promising applications in the development of value added products.
Similar content being viewed by others
References
Essabir, H.; Hilali, E.; Elgharad, A.; El Minor, H.; Imad, A.; Elamraoui, A.; Al Gaoudi, O.: Mechanical and thermal properties of bio-composites based on polypropylene reinforced with Nut-shells of Argan particles. Mater. Des. 49, 442–448 (2013)
Sahin, A.; Tasdemir, H.M.; Karabulut, A.F.; Gürü, M.: Mechanical and thermal properties of particleboard manufactured from waste peachnut shell with glass powder. Arab. J Sci Eng. 42, 1559–1568 (2017)
Sapuan, S.M.; Harimi, M.; Maleque, M.A.: Mechanical properties of epoxy/coconut shell filler particle composites. Arab. J. Sci. Eng. 28, 171–181 (2003)
Online, V.A.; Yu, Y.; Guo, Y.; Jiang, T.; Jiang, K.; Li, J.; Guo, S.: RSC advances laser sintering and post-processing of a walnut. RSC Adv. 7, 23176–23181 (2017)
Nitin, S.; Singh, V.K.: Mechanical behaviour of walnut reinforced composite. J. Mater. Environ. Sci. 4, 233–238 (2013)
Essabir, H.; Achaby, M.E.; Hilali, E.M.; Bouhfid, R.; Qaiss, A.: Morphological, structural, thermal and tensile properties of high density polyethylene composites reinforced with treated argan nut shell particles. J. Bionic Eng. 12, 129–141 (2015)
Bagheri, R.; Marouf, B.T.; Pearson, R.A.: Rubber-toughened epoxies? A critical review. J. Macromol. Sci. Polym. Rev. 49, 201–225 (2009)
Talikoti, C.B.; Hawal, T.T.; Kakkamari, P.P.; Patil, M.S.: Preparation and characterization of epoxy composite reinforced with walnut shell powder. Int. Res. J. Eng. Technol. 2, 721–725 (2015)
Zaaba, N.F.; Ismail, H.; Mariatti, M.: Utilization of polyvinyl alcohol on properties of recycled polypropylene/peanut shell powder composites. Proc. Chem. 19, 763–769 (2016)
Zahra, F.; Mechtali, E.; Essabir, H.; Nekhlaoui, S.; Bensalah, M.O.: Mechanical and thermal properties of polypropylene reinforced with almond shells particles? Impact of chemical treatments. J. Bionic Eng. 12, 483–494 (2015)
Xu, K.; Tu, D.; Chen, T.; Zhong, T.; Lu, J.: Effects of environmental-friendly modified rubber seed shell on the comprehensive properties of high density polyethylene/rubber seed shell composites. Ind. Crops Prod. 91, 132–141 (2016)
Kumar, S.S.; Kanagaraj, G.: Effect of graphite and silicon carbide fillers on mechanical properties of PA6 polymer composites. Polym. Eng. 4, 1–11 (2016)
Olsson, A.; Salm, L.: The association of water to cellulose and hemicellulose in paper examined by FTIR spectroscopy. The association of water to cellulose and hemicellulose in paper. Carbohydr. Res. 339, 813–818 (2014)
Essabir, H.; Bensalah, M.O.; Rodrigue, D.; Bouhfid, R.; Qaiss, A.E.K.: Biocomposites based on Argan nut shell and a polymer matrix: effect of filler content and coupling agent. Carbohydr. Polym. 143, 70–83 (2016)
Akil, H.M.; Cheng, L.W.; Mohd Ishak, Z.A.; Abu Bakar, A.; Abd Rahman, M.A.: Water absorption study on pultruded jute fibre reinforced unsaturated polyester composites. Compos. Sci. Technol. 69, 1942–1948 (2009)
Hassan, S.N.A.M.; Ishak, M.A.M.; Ismail, K.; Ali, S.N.; Yusop, M.F.: Comparison study of rubber seed shell and kernel (Hevea brasiliensis) as raw material for bio-oil production. Energy Proce. 52, 610–617 (2014)
Chen, B.C.; Robert, D.: Characterization of lignin by IH and 13C NMR spectroscopy. Methods Enzymol. 161, 137–174 (1988)
Taylor, P.; Zhu, W.; Westman, G.; Theliander, H.: Investigation and characterization of lignin precipitation in the lignoboost process. J. Wood Chem. Technol. 34, 77–97 (2014)
Mei, Q.; Liu, H.; Shen, X.; Meng, Q.; Liu, H.; Xiang, J.; Han, B.: Selective utilization of the methoxy group in lignin to produce acetic acid. Angew. Chem. Int. Ed. 56, 14868–14872 (2017)
Hu, S.; Hoxu, F.; Odani, H.: 1H NMR study of the solvation and gelation in a poly(vinyl alcohol)/ DMSO-d6 / H20 system. Bull. Inst. Chem. Res. 67, 5–6 (1987)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Lala, S.D., Deoghare, A.B. & Chatterjee, S. Effect of Dual Pre-treatment on Mechanical, Morphological, Electrical and Thermal Properties of Rubber Seed Shell-Reinforced Epoxy Composites. Arab J Sci Eng 44, 845–856 (2019). https://doi.org/10.1007/s13369-018-3302-3
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s13369-018-3302-3