Abstract
The wound healing process is characterized by varied biological and molecular cascades including inflammation, tissue proliferation, and remodeling phase. To augment and maintain these cascades, an all-natural matrix system is proposed. Biocompatible biopolymers, sodium alginate and gelatin, were employed to prepare microfibers via extrusion-gelation into a physical crosslinking solution. Curcumin, an anti-inflammatory, anti-oxidant and wound healing agent, was loaded into the fibers as a natural bioactive compound. Curcumin-loaded composite microfibers and blank microfibers were fabricated using biopolymers such as sodium alginate and gelatin. The formulation batches were coded as A1G9-A10G0 according to the varied concentrations of sodium alginate and gelatin. The molecular transitions within the composite microfibers were characterized using FTIR and were further corroborated using molecular mechanics analysis. In mechanical properties tensile strength and elongation-at-break (extensibility) were ranging between 1.08 ± 0.01 to 3.53 ± 0.41 N/mm2 and 3.89 ± 0.18 to 0.61 ± 0.03%. The morphological analysis confirmed the formation and fabrication of the microfibers. In addition, physical evaluation including matrix degradation and entrapment efficiency was performed to give a comparative account of various formulations. The water uptake capacity of the blank and curcumin-loaded composite fibers was found to be in the range of 30.77 ± 2.17 to 100.00 ± 5.99 and 22.34 ± 1.11 to 56.34 ± 4.68, respectively. Composite microfibers presented a cumulative release of 85% in 72 h, confirming the prolonged release potential of the composite fibers. The drug release followed an anomalous (non-Fickian) release behavior asserting the role of degradation and diffusion. In an in vivo full-thickness cutaneous wound model, the composite microfibers provided higher degree of contraction 96.89 ± 3.76% as compared to the marketed formulation (Vicco turmeric cream). In conclusion, this all-natural, alginate–gelatin–curcumin composite has the potential to be explored as a cost-effective wound healing platform.
Similar content being viewed by others
References
Abbas M, Muhammad Arshad HT et al (2019) Wound healing potential of curcumin cross-linked chitosan/polyvinyl alcohol. Int J BiolMacromol 140:871–876. https://doi.org/10.1016/j.ijbiomac.2019.08.153
Afjoul H, Shamloo A, Kamali A et al (2020) Freeze-gelled alginate/gelatin scaffolds for wound healing applications: an in vitro, in vivo study. Mater SciEng 113:110957. https://doi.org/10.1016/j.msec.2020.110957
Akbik D, Ghadiri M, Chrzanowski W et al (2014) Curcumin as a wound healing agent. Life Sci 116(1):1–7. https://doi.org/10.1016/j.lfs.2014.08.016
Bagher Z, Ehterami A, Safdel MH et al (2020) Wound healing with alginate/chitosan hydrogel containing hesperidin in rat model. J Drug DelivSci Tech 55:101379. https://doi.org/10.1016/j.jddst.2019.101379
Barchitta M, Maugeri A, Favara G et al (2019) Nutrition and wound healing: an overview focusing on the beneficial effects of curcumin. Int J MolSci 20(5):1–14. https://doi.org/10.3390/ijms20051119
Bayomi SM, El-Kashef HA, El-Ashmawy MB et al (2015) Synthesis and biological evaluation of new curcumin analogues as antioxidant and antitumor agents: molecular modeling study. Eur J Med Chem 101:584–594. https://doi.org/10.1016/j.ejmech.2015.07.014
Bediako JK, Lin S, Sarkar AK, Zhao Y, Choi JW, Song MH, Yun YS et al (2020) Benignly-fabricated crosslinkedpolyethylenimine/calcium-alginate fibers as high-performance adsorbents for effective recovery of gold. J Clean Prod 252:119389. https://doi.org/10.1016/j.jclepro.2019.119389
Blanco PA, López RA, Loarca PG et al (2015) Characterization, release and antioxidant activity of curcumin-loaded amaranth-pullulanelectrospun fibers. LWT-Food SciTechnol 63(2):1137–1144. https://doi.org/10.1016/j.lwt.2015.03.081
Fan L, Du Y, Huang R et al (2005) Preparation and characterization of alginate/gelatin blend fibers. J ApplPolymSci 96(5):1625–1629. https://doi.org/10.1002/app.21610
Fereydouni N, Darroudi M, Movaffagh J et al (2019) Curcuminnanofibers for the purpose of wound healing. J Cell Physiol 234(5):5537–5554. https://doi.org/10.1002/jcp.27362
Golchin A, Hosseinzadeh S, Staji M et al (2019) Biological behavior of the curcumin incorporated chitosan/poly (vinyl alcohol) nanofibers for biomedical applications. J Cell Biochem 120(9):15410–15421. https://doi.org/10.1002/jcb.28808
Hassani A, Mahmood S, Enezei HH et al (2020) Formulation, characterization and biological activity screening of sodium alginate-gum arabic nanoparticles loaded with curcumin. Molecules 25(9):1–21. https://doi.org/10.3390/molecules25092244
Hewlings SJ, Kalman DS (2017) Curcumin: a review of it’s effects on human health. Foods 6(10):1–11. https://doi.org/10.3390/foods6100092
Kaur R, Sharma A, Puri, et al (2019) Preparation and characterization of biocomposite films of carrageenan/locust bean gum/montmorrillonite for transdermal delivery of curcumin. BI 9(1):37–43. https://doi.org/10.15171/bi.2019.05
Kulkarni AS, Gurav DD, Khan AA, Shinde VS et al (2020) Curcumin loaded nanofibrous mats for wound healing application. Colloid Surface B 189:110885–110885. https://doi.org/10.1016/j.colsurfb.2020.110885
Kumar P, Choonara YE, Pillay V et al (2018) In silicoanalytico-mathematical interpretation of biopolymeric assemblies: quantification of energy surfaces and molecular attributes via atomistic simulations. BioengTransla Med 3(3):222–231. https://doi.org/10.1002/btm2.10105
Luz PP, Silva ML, Hinestroza JP et al (2013) Curcumin-loaded biodegradable electrospun fibers: preparation, characterization, and differences in fiber morphology. Int J Polym Anal Ch 18(7):534–544. https://doi.org/10.1080/1023666X.2013.816207
Mahmud MM, Zaman S, Perveen A et al (2020) Controlled release of curcumin from electrospun fiber mats with antibacterial activity. J Drug DelivSci Tech 55:101386. https://doi.org/10.1016/j.jddst.2019.101386
Mutlu G, Calamak S, Ulubayram K et al (2018) Curcumin-loaded electrospun PHBV nanofibers as potential wound-dressing material. J Drug DelivSci Tech 43:185–193. https://doi.org/10.1016/j.jddst.2017.09.017
Nguyen DT, Dinh VT, Dang LH (2019) Dual interactions of amphiphilic gelatin copolymer and nanocurcumin improving the delivery efficiency of the nanogels. Polymers 11(5):1–15. https://doi.org/10.3390/polym11050814
Niranjan R, Kaushik M, Prakash J (2019) Enhanced wound healing by PVA/chitosan/curcumin patches: in vitro and in vivo study. Colloid Surf B 182:1–8. https://doi.org/10.1016/j.colsurfb.2019.06.068
Pankongadisak P, Sangklin S, Chuysinuan P et al (2019) The use of electrospuncurcumin-loaded poly (l-lactic acid) fiber mats as wound dressing materials. J Drug DelivSci Tech 53:1–9. https://doi.org/10.1016/j.jddst.2019.06.018
Rajkumar SRJ, Gnanavel G, Nadar MM et al (2018) Wound healing activity of MorindatinctoriaRoxb aqueous leaf extract. 3 Biotech 8(8):343. https://doi.org/10.1007/s13205-018-1361-5
Ranjbar-Mohammadi M (2018) Characteristics of aloe vera incorporated poly (ε-caprolactone)/gum tragacanthnanofibers as dressings for wound care. J Ind Text 47(7):1464–1477. https://doi.org/10.1177/1528083717692595
Saraswathy N, Rohit R, Shanmugam K (2012) A preliminary investigation of turmeric-agar composite film as bioactive wound dressing material on excision wound in rat model. Indian J Nat Prod Resour 3(2):237–241
Shababdoust A, Ehsani M, Shokrollahi P et al (2018) Fabrication of curcumin-loaded electrospunnanofiberous polyurethanes with anti-bacterial activity. ProgrBiomat 7(1):23–33. https://doi.org/10.1007/s40204-017-0079-5
Sharifah IS, Qairol AA, Azlina HN et al (2017) Thermal, structural and mechanical properties of melt drawn cur-loaded poly (lactic acid) fibers. ProcediaEng 184:544–551. https://doi.org/10.1016/j.proeng.2017.04.129
Shrivastav A, Mishra AK, Ali SS et al (2018) In vivo models for assesment of wound healing potential: a systematic review. Wound Med 20:43–53. https://doi.org/10.1016/j.wndm.2018.01.003
Si J, Yang Y, Xing X et al (2019) Controlled degradable chitosan/collagen composite scaffolds for application in nerve tissue regeneration. PolymDegradStabil 166:73–85. https://doi.org/10.1016/j.polymdegradstab.2019.05.023
Sorg H, Tilkorn DJ, Hager S et al (2017) Skin wound healing: an update on the current knowledge and concepts. EurSurg Res 58(1–2):81–94. https://doi.org/10.1159/000454919
Sun XZ, Williams GR, Hou XX et al (2013) Electrospuncurcumin-loaded fibers with potential biomedical applications. CarbohydrPolym 94(1):147–153. https://doi.org/10.1016/j.carbpol.2012.12.064
Varaprasad K, Jayaramudu T, Kanikireddy V, Toro C, Sadiku ER et al (2020a) Alginate-based composite materials for wound dressing application: a mini review. CarbohyrPolym 236:116025. https://doi.org/10.1016/j.carbpol.2020.116025
Varaprasad K, Lopez M, Nunez D, Jayaramudu T, Sadiku ER, Karthikeyan C, Oyarzúnc P et al (2020b) Antibiotic copper oxide-curcuminnanomaterials for antibacterial applications. J MolLiq 300:112353. https://doi.org/10.1016/j.molliq.2019.112353
Varaprasad K, Nunez D, Ide W, Jayaramudu T, Sadiku ER et al (2020c) Development of high alginate comprised hydrogels for removal of Pb(II) ions. J MolLiq 298:112087. https://doi.org/10.1016/j.molliq.2019.112087
Wang C, Ma C, Wu Z et al (2015) Enhanced bioavailability and anticancer effect of curcumin-loaded electrospunnanofiber: in vitro and in vivo study. Nanoscale Res Lett 10(1):1–10. https://doi.org/10.1186/s11671-015-1146-2
Wang H, Hao L, Wang P et al (2017) Release kinetics and antibacterial activity of curcumin loaded zein fibers. Food Hydrocoll 63:437–446. https://doi.org/10.1016/j.foodhyd.2016.09.028
Zahiri M, Khanmohammadi M, Goodarzi A et al (2020) Encapsulation of curcumin loaded chitosan nanoparticle within poly (ε-caprolactone) and gelatin fiber mat for wound healing and layered dermal reconstitution. Int J BiolMacromol 153:1241–1250. https://doi.org/10.1016/j.ijbiomac.2019.10.255
Acknowledgements
The authors are thankful to Dr. Madhu Chitkara, Vice-Chancellor, Chitkara University, Punjab, India; Dr. Ashok Chitkara, Chancellor, Chitkara University, Punjab, India and Dr. Sandeep Arora, Director, Chitkara University, Punjab, India for constant encouragement and providing necessary facilities.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors declare no conflict of interest.
Ethical approval
The animal study was conducted in accordance with the protocol approved by the Animal Ethics Committee of Chitkara College of Pharmacy, Chitkara University, Patiala, Punjab (1181/PO/ReBi/S/08/CPCSEA).
In vivo animal study
In vivo wound healing studies were conducted in a full-thickness wound model and were approved by the Animal Ethics Committee (AEC), Chitkara University, Patiala, Punjab (118/PO/ReBi/S/08/CPCSEA).
Rights and permissions
About this article
Cite this article
Sharma, A., Mittal, A., Puri, V. et al. Curcumin-loaded, alginate–gelatin composite fibers for wound healing applications. 3 Biotech 10, 464 (2020). https://doi.org/10.1007/s13205-020-02453-5
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s13205-020-02453-5