Abstract
Natural materials and plants have a long history of medical applications due to their broad range of favorable biological functions including biocompatibility, anti-bacterial, anti-oxidant and anti-inflammatory properties. Main objective of this study was to develop alginate-chitosan-hyaluronic acid (ACH) composite fibers with controlled drug release, and liquid retention properties for better moist wound healing. The dope comprising sodium alginate was extruded into calcium chloride (CaC12) coagulation bath. The developed calcium alginate fibers were then passed through a bath containing hydrolyzed chitosan and dip coated with hyaluronic acid for 24 hours. The resulting ACH composite fibers were then rinsed with deionized water and dried using acetone. These fibers were tested for tensile properties, % swelling, liquid absorption (g/g) and controlled drug release. The results concluded that ACH composite fibers can be produced by wet spinning and have adequate tensile properties, high % swelling, liquid absorption (g/g) and controlled release of hyaluronic acid for improved wound healing.
Similar content being viewed by others
References
I. R. Sweeney, M. Miraftab, and G. Collyer, Carbohydr. Polym., 102, 920 (2014).
S. Mizrahy and D. Peer, Chem. Soc. Rev., 41, 2623 (2012).
V. R. Sinha and R. Kumria, Int. J. Pharma., 224, 19 (2001).
Y. Ji, K. Ghosh, X. Z. Shu, B. Li, J. C. Sokolov, G. D. Prestwich, R. A. Clark, and M. H. Rafailovich, Biomaterials, 27, 3782 (2006).
C. Jou, L. Yuan, S. Lin, M. Hwang, W. Chou, D. Yu, and M. Yang, J. Appl. Polym. Sci., 104, 16 (2006).
Y. Qin, Appl. Polym. Sci., 100, 2516 (2006).
D. Raafat, K. V. Bargen, A. Haas, and H. Sahl, Appl. Environ. Microbiol., 74, 3746 (2008).
T. Tsai, H. Chien, T. Wang, C. T. Huang, Y. B. Ker, and C. T. Chen, Antimicrob. Agents Ch., 55, 1883 (2011).
A. Zamani and M. Taherzadeh, Bioresource, 5, 1554 (2010).
W. Steplewski, D. Wawro, and A. Niekraszewicz, Fibres Text. Easten Eur., 14, 25 (2006).
N. Maeda, J. Miao, T. J. Simmons, J. S. Dordick, and R. J. Linhardt, Carbohydr. Polym., 102, 950 (2014).
A. S. Mehta, B. K. Singh, and P. K. Dutta, Asian Chit. J., 10, 25 (2014).
S. Yamane, N. Iwasaki, Y. Kasahara, K. Harada, T. Majima, K. Monde, S. Nishimura, and A. Minami, J. Biomed. Mater. Res. Part A, 81, 586 (2007).
J. J. Ahire, D. Robertson, D. P. Neveling, A. J. van Reenen, and L. M. T. Dicks, RSC Adv., 4, 34791 (2016).
Textiles, Fibers, BS EN ISO 5079:1996 (1996).
R. Masood and M. Miraftab, J. Wound Care, 23, 153 (2014).
J. M. Song, J. H. Im, J. H. Kang, and J. D. Kang, Carbohydr. Polym., 78, 633 (2009).
F. Nicola, J. Biol. Chem., 220, 303 (1956).
C. Knill, J. Kennedy, J. Mistry, M. Miraftab, G. Smart, M. R. Groocock, and H. J. Williams, Carbohydr. Polym., 55, 65 (2004).
M. A. Xianpeng, J. Xiujian, and Z. Yunz, CN Patent, 102489193 (2012).
J. Necas, L. Bartosikova, P. Brauner, and J. Kolar, Vet Med. (Praha), 53, 397 (2008).
G. L. Xueping, CN Patent, 1748569 (2006).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Hussain, T., Masood, R., Umar, M. et al. Development and characterization of alginate-chitosan-hyaluronic acid (ACH) composite fibers for medical applications. Fibers Polym 17, 1749–1756 (2016). https://doi.org/10.1007/s12221-016-6487-7
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12221-016-6487-7