Abstract
This study evaluates and compares the milled fractions of buckwheat (Fagopyrum esculentum) for their physical, functional properties and nutritional composition. Four samples of buckwheat from the Indian Himalayan regions were roller-milled into five fractions: fine-flour, grits, bran, hull-1 and hull-2. The water activity of the grains lies between 0.77 and 0.83%. The L* values were in the range of 22.77 ± 0.36 to 24.46 ± 0.37 for the four buckwheat grains. Water binding capacity and oil binding capacity showed an increasing pattern of fine flour > grits > bran > hull-1 whereas the swelling power exhibited a reverse trend. The maximum (20.03 ± 1.82%) and the minimum (3.19 ± 0.12%) protein content were found in bran and fine-flour fractions respectively. Highest starch content was detected in fine-flour (73.19 ± 2.00–76.32 ± 2.36%) and lowest in hull-1 (11.02 ± 2.00–17.54 ± 2.36%) with no significant (p > 0.05) difference between different samples. Fine-flour exhibited the lowest phytates content (0.59 ± 0.00–0.62 ± 0.01%) whereas bran has highest tannins (0.06 ± 0.03–1.39 ± 0.02). Milled fractions with specific functional properties and nutrients composition have potential for different food applications.
Similar content being viewed by others
References
AACC (2000) Approved methods of the American Association of Cereal Chemists. 10th ed Vols I and II
Anderson RA (1969) Gelatinization of corn grits by roll-and extrusion-cooking. Cereal Sci Today 14:4–12
AOAC (2005) Official methods of analysis (19th ed) Association of Official Analytical Chemists, Washington
Batey IL (1982) Starch analysis using thermostable alpha-amylases. Starch-Stärke 34(4):125–128
Beuchat LR (1977) Functional and electrophoretic characteristics of succinylated peanut flour protein. J Agric Food Chem 25(2):258–261
Bonafaccia G, Marocchini M, Kreft I (2003) Composition and technological properties of the flour and bran from common and tartary buckwheat. Food Chem 80(1):9–15
Devisetti R, Yadahally SN, Bhattacharya S (2014) Nutrients and antinutrients in foxtail and proso millet milled fractions: Evaluation of their flour functionality. LWT-Food Sci Technol 59(2):889–895
Dural NH, Hines AL (1993) Adsorption of water on cereal-bread type dietary fibers. J Food Eng 20(1):17–43
Gawlik-Dziki U, Dziki D, Baraniak B, Lin R (2009) The effect of simulated digestion in vitro on bioactivity of wheat bread with Tartary buckwheat flavones addition. LWT-Food Sci Tech 42(1):137–143
Gimenez-Bastida JA, Piskuła M, Zieliński H (2015) Recent advances in development of gluten free buckwheat products. Trends Food Sci Technol 44(1):58–65
Guo X, Yao H, Chen Z (2007) Effect of heat, rutin and disulfide bond reduction on in-vitro pepsin digestibility of Chinese tartary buckwheat protein fractions. Food Chem 102(1):118–212
Guo XD, Zhang DY, Gao XJ, Parry J, Liu K, Liu BL, Wang M (2013) Quercetin and quercetin-3-glucuronide are equally effective in ameliorating endothelial insulin resistance through inhibition of reactive oxygen species-associated inflammation. Mol Nutr Food Res 57(6):1037–1045
He J, Klag MJ, Whelton PK, Mo JP, Chen JY, Qian MC, Mo PS, He GQ (1995) Oats and buckwheat intakes and cardiovascular disease risk factors in an ethnic minority of China. Am J Clin Nutr 61(2):366–372
Holm J, Björck I, Drews A, Asp NG (1986) A rapid method for the analysis of starch. Starch Stärke 38(7):224–226
Holloway WD, Greig RI (1984) Water holding capacity of hemicelluloses from fruits, vegetables and wheat bran. J Food Sci 49:1632–1633
Ikeda S, Yamashita Y (1994) Buckwheat as a dietary source of zinc copper and manganese. Fagopyrum 14:29–34
Leach HW (1959) Structure of starch granules. I. Swelling and solubility patterns of various starches. Cereal Chem 36:534–544
Mariotti M, Lucisano M, Pagani MA, Iametti S (2008) Macromolecular interactions and rheological properties of buckwheat-based dough obtained from differently processed grains. J Agric Food Chem 56(11):4258–4267
Mariotti M, Pagani MA, Lucisano M (2013) The role of buckwheat and HPMC on the breadmaking properties of some commercial gluten-free bread mixtures. Food Hydrocolloids 30(1):393–400
Ponce-Garcia N, Ramirez-Wong B, Escalante-Aburto A, Torres-Chavez PI, Figueroa J (2016) Mechanical properties in wheat (Triticum aestivum) kernels evaluated by compression tests: a review. In: El-Amin MF (ed) Viscoelastic and viscoplastic materials, 1st edn. In Tech, London, pp 21–33
Skrabanja V, Kreft I, Golob T, Modic M, Ikeda S, Ikeda K, Kreft S, Bonafaccia G, Knapp M, Kosmelj K (2004) Nutrient content in buckwheat milling fractions. Cereal Chem 81(2):172–176
Skrabanja V, Laerke HN, Kreft I (1998) Effects of hydrothermal processing of buckwheat (Fagopyrum esculentumMoench) groats on starch enzymatic availability in-vitro and in vivo in Rats. J Cereal Sci 28(2):209–214
Steadman KJ, Burgoon MS, Lewis BA, Edwardson SE, Obendorf RL (2001) Minerals phytic acid tannin and rutin in buckwheat seed milling fractions. J Sci Food Agri 81(11):1094–1100
Unal H, Izli G, Izli N, Asik BB (2017) Comparison of some physical and chemical characteristics of buckwheat (Fagopyrum esculentum Moench) grains. Cyta-J Food 52(2):257–265
Vaintraub IA, Lapteva NA (1988) Colorimetric determination of phytate in unpurified extracts of seeds and the products of their processing. Anal Biochem 175(1):227–230
Vogrincic M, Timoracka M, Melichacova S, Vollmannova A, Kreft I (2010) Degradation of rutin and polyphenols during the preparation of tartary buckwheat bread. J Agric Food Chem 58(8):4883–4887
Yoo J, Kim Y, Yoo SH, Inglett GE, Lee S (2012) Reduction of rutin loss in buckwheat noodles and their physicochemical characterisation. Food Chem 132(4):2107–2111
Zhang M, Chen H, Li J, Pei Y, Liang Y (2010) Antioxidant properties of tartary buckwheat extracts as affected by different thermal processing methods. LWT-Food Sci Tech 43(1):81–185
Acknowledgement
This work was supported by the Department of Science and Technology- Science and Engineering Board (DST-SERB), Government of India (EEQ/2017/000365). The authors are thankful to Mr. Anbalagan K. and Mr. Lokesha C., Central Instruments Facility and Services, Central Food Technological Research Institute (CFTRI), Mysore, for their help in carrying out grain hardness and minerals content analyses.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Kasar, C., Thanushree, M.P., Gupta, S. et al. Milled fractions of common buckwheat (Fagopyrum esculentum) from the Himalayan regions: grain characteristics, functional properties and nutrient composition. J Food Sci Technol 58, 3871–3881 (2021). https://doi.org/10.1007/s13197-020-04848-x
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s13197-020-04848-x