Abstract
Determination of an optimal set of machining parameters is needed to produce an ordered product of considerable quality and minimal manufacturing cost. The nonlinear and highly constrained nature of machining models restricts the application of classical gradient based techniques for handling such problems. The present study focuses on obtaining the optimal machining conditions during multi-pass turning operations. Methodology used is, a chaotic PSO namely Totally Disturbed Particle Swarm Optimization (TDPSO), an enhanced variant of PSO is employed for obtaining the optimal machining conditions during multi-pass turning operations subject to various constraints. In TDPSO, the phenomenon of chaos is embedded at different stages of PSO in order to make the search process more efficient. Results obtained by TDPSO are compared with results available in literature and it is observed that TDPSO is quite efficient for dealing with such problems.
Similar content being viewed by others
References
Agapiou JS (1992) An optimization of multi-stage machining system, part I: mathematical solution part 2: the algorithm and application. J Eng Ind 114:524–538
Agapiou JS (1992) The optimization of machining operation based on a combined criterion, part I: the use of combined objectives in single-pass operations. J Eng Ind 114:500–507
Amiolemhen E, Ibhadode AOA (2004) Application of genetic algorithm determination of the optimal machining parameters in the conversion of a cylindrical bar stock into a continuous finished profile. Int J Mech Tools Manuf 44(12–13):1403–1412
Bouzid W (2005) Cutting parameter optimization to minimize production time in high speed turning. J Mater Process Technol 161(3):388–395
Cakir MC, Gurarda A (1998) Optimization and graphical representation of machining conditions in multi-pass turning operations. Comput Integr Manuf Syst 11(3):157–170
Chandrasekaran M, Muralidhar M, Krishna CM, Dixit US (2010) Application of soft computing techniques in machining performance prediction and optimization: a literature review. Int J Adv Manuf Technol 46(5–8):445–464
Chauhan P, Deep K, Pant M (2011) ‘Optimizing CNC turning process using real coded genetic algorithm and differential evolution’, transaction on evolutionary algorithm and continuous optimization : ISSN: 2229-871. Glob J Technol Optim 2:157–165
Chen MC, Chen KY (2003) Optimization of multipass turning operations with genetic algorithms: a note. Int J Prod Res 41(14):3385–3388
Chen MC, Tsai DM (1996) A simulated annealing approach for optimization of multi-pass turning operations. Int J Prod Res 34(10):2803–2825
Chien WT, Tsai CS (2003) The investigation on the prediction of tool wear and determination of optimum cutting conditions in machining 17-4PH stainless steel. J Mater Process Technol 140(1–3):340–345
Chua MS, Loh HT, Wong YS, Rahman M (1991) Optimization of cutting conditions for multi-pass turning operations using sequential quadratic programming. J Mater Process Technol 28(1–2):253–262
Cus F, Balic J (2003) Optimization of cutting process by GA approach. Robotics Comput Integr Manuf 19:113–121
Deep K, Chauhan P, Pant M (2012) Totally disturbed chaotic particle swarm optimization. In: Proc. of IEEE conference on evolutionary computing (CEC-2012), June 10–15, 2012, pp 1–8
Deep K, Chauhan P, Pant M (2011) Optimizing machining parameters using a novel real coded GA. Int J Appl Math Mech 7(3):53–69
Gopala krishnan B, Al-Khayyal F (1991) Machine parameter selection for turning with constraints: an analytical approach based on geometric programming. Int J Prod Res 29(9):1897–1908
Gupta R, Batra JL, Lal GK (1995) Determination of optimal subdivision of depth of cut in multi-pass turning with constraints. Int J Prod Res 33(9):2555–2565
Hui YV, Leung LC, Linn R (2001) Optimal machining conditions with cost of quality and tool maintenance for turning. Int J Prod Res 39(4):647–665
Kim SS, Kim IH, Mani V, Kim HJ (2008) Real-coded genetic algorithm for machining condition optimization. Int J Adv Manuf Technol 38:884–895
Liang M, Mgwatu M, Zuo M (2001) Integration of cutting parameter selection and tool adjustment decision for multi-pass turning. Int J Adv Manuf Technol 17:861–869
Lin C-M, Li M-C, Ting A-B, Lin M-H (2011) A robust self-learning PID control system design for nonlinear systems using a particle swarm optimization algorithm. Int J Mach Learn Cybern 2(4):225–234
Molinari A, Nouari M (2002) Modeling of tool wear by diffusion in metal cutting. Wear 252(1–2):135–149
Natarajan U, Saravanan R, Periasamy VM (2006) Application of particle swarm optimization in artificial neural network for prediction of tool life. Int J Adv Manuf Technol 28:1084–1088
Nian CY, Yang WH, Tarng YS (1999) Optimization of turning operations with multiple performance characteristics. J Mater Process Technol 95(1–3):90–96
Ojha DK, Dixit US, Davim JP (2009) A soft computing based optimization of multi-pass turning processes. Int J Mater Prod Technol 35:145–166
Onwubolu GC, Kumalo T (2001) Optimization of multipass turning operations with genetic algorithms. Int J Prod Res 39(16):3727–3745
Prasad AVS, Rao RK, Rao VKS (1997) Optimal selection of process parameter for turning operation in CAPP system. Int J Prod Res 35(6):1495–1522
Rajemi MF, Mativenga PT, Aramcharoen A (2010) Sustainable machining: selection of optimum turning conditions based on minimum energy considerations. J Clean Prod 18(10–11):1059–1065
RaoVR, Kalyankar VD (2013) Multi-pass turning process parameter optimization using teaching-learning based optimization algorithm, Scientia Iranica, available online 10 Jan, 2013
Rana S, Jasola S, Kumar R (2013) A boundary restricted adaptive particle swarm optimization for data clustering. Int J Mach Learn Cybern 4(4):391–400
Reddy SVB, Shunmugam MS, Narendran TT (1998) Optimal sub-division of the depth of cut to achieve minimum production cost in multi-pass turning using a genetic algorithm. J Mater Process Technol 79(1–3):101–108
Saravanan R, Ashokan P, Sachithanandam M (2001) Comparative analysis of conventional and non-conventional optimization technique for CNC-turning process. Int J Adv Manuf Technol 17:471–476
Sardinas RQ, Reis P, Davim JP (2006) Multi-objective optimization of cutting parameters for drilling laminate composite materials by using genetic algorithms. Compos Sci Technol 66(15):3083–3088
Satish kumar S, Asokan P, Kumanan S (2006) Optimization of depth of cut in multi-pass turning using nontraditional optimization techniques. Int J Adv Manuf Technol 29(3):230–238
Sharma VS, Dhiman S, Sehgal R, Sharma SK (2008) Estimation of cutting forces and surface roughness for hard turning using neural networks. Int J Adv Manuf Technol 19(4):473–483
Shin YC, Joo YS (1992) Optimization of machining conditions with practical constraints. Int J Prod Res 30(12):2907–2919
Singh Y, Chauhan P (2012) Analyzing constrained machining conditions in multi-pass turning by differential evolution. Adv Mech Eng Appl 2(3):201–206 (special issue: NICA)
Soodamani R, Liu ZQ (2000) GA-based learning for a model-based object recognition system. Int J Approx Reason 23(2):85–109
Srinivas J, Giri R, Yang SH (2009) Optimization of multi-pass turning using particle swarm intelligence. Int J Adv Manuf Technol 40(1–2):56–66
Vijayakumar K, Prabhaharan G, Asokan P, Saravanan R (2003) Optimization of multi-pass turning operations using ant colony system. Int J Mach Tools Manuf 43(15):1633–1639
Wang DX, Zuo MJ, Qi KZ, Liang M (1996) Online tool adjustment with adaptive tool wear function identification. Int J Prod Res 34(9):2499–2515
Wang X, Da ZJ, Balaji AK, Jawahir IS (2002) Performance-based optimal selection of cutting conditions and cutting tools in multi-pass turning operations using genetic algorithms. Int J Prod Res 40(9):2053–2065
Wang X, He Y, Dong L, Zhao H (2011) Particle swarm optimization for determining fuzzy measures from data. Inf Sci 181(19):4230–4252
Wang YC (2007) A note on optimization of multi-pass turning operations using ant colony system. Int J Mach Tools Manuf 47(12–13):2057–2059
Wang Y-C, Chiu Y-C, Hung Y-P (2011) Optimization of multi-task turning operations under minimal tool waste consideration. Robotics Comput Integr Manuf 27(4):674–680
Yildiz AR (2009) A novel hybrid immune algorithm for global optimization in design and manufacturing. Robotics Comput Integr Manuf 25(2):261–270
Yildiz AR (2009) An effective hybrid immune-hill climbing optimization approach for solving design and manufacturing optimization problems in industry. J Mater Process Technol 50(4):224–228
Yildiz AR (2009) Hybrid immune-simulated annealing algorithm for optimal design and manufacturing. Int J Mater Prod Technol 34(3):217–226
Yildiz AR (2009) A novel particle swarm optimization approach for product design and manufacturing. Int J Adv Manuf Technol 40(5–6):617–628
Yildiz AR (2012) A comparative study of population-based optimization algorithms for turning operations. Inf Sci 210:81–88
Yildiz AR (2013) Hybrid Taguchi-differential evolution algorithm for optimization of multi-pass turning operations. Appl Soft Comput 13(3):1433–1439
Yildiz AR (2013) Optimization of multi-pass turning operations using hybrid teaching learning-based approach. Int J Adv Manuf Technol. doi:10.1007/s00170-012-4410-y
Yildiz AR (2013) Optimization of cutting parameters in multi-pass turning using artificial bee colony-based approach. Inf Sci 220:399–407
Yildiz AR, Ozturk F (2006) Hybrid enhanced genetic algorithm to select optimal machining parameters in turning operation. J Eng Manuf 220(12):2041–2053
Yusup N, Zain AM, Hashim SZM (2012) Evolutionary techniques in optimizing machining parameters: review and recent applications (2007–2011). Expert Syst Appl 39(10):9909–9927
Yusup N, Zain AM, Hashim SZM (2012) Overview of PSO for Optimizing Process Parameters of Machining. Procedia Eng 29:914–923
Zheng LY, Ponnambalam SG (2010) Optimization of multipass turning operations using particle swarm optimization. In: Proc. of 7th international symposium on mechatronics and its applications (ISMA), 1–6
Zuperl U, Cus F (2003) Optimization of cutting conditions during cutting by using neural networks. Robotics Comput Integr Manuf 19(1–2):189–199
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Chauhan, P., Pant, M. & Deep, K. Parameter optimization of multi-pass turning using chaotic PSO. Int. J. Mach. Learn. & Cyber. 6, 319–337 (2015). https://doi.org/10.1007/s13042-013-0221-1
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s13042-013-0221-1