Abstract
This article discusses affordable schlieren methods which can visualize hidden details in three-dimensional high-speed flow. Mainly, two schlieren methods are brought to light, namely inclined schlieren and focusing schlieren. These two methods have been applied to visualize three-dimensional flow fields like normal shock boundary layer interaction in ducts and flows with shock–shock interactions. The paper explains the possibility of measuring normal shock oscillation in spanwise/transverse direction. Shock height variation across the duct span is also illustrated, using inclined schlieren. Scanning of the focusing schlieren setup can give planar views of three-dimensional shock–shock interactions. It is also shown that the two methods can be merged to give the inclined focusing schlieren method which can also be used to understand three-dimensional flow fields. Further, the possibilities and limitations of these flow visualization methods have been discussed.
Graphic abstract
Similar content being viewed by others
References
Ahmed KA, Wiley A (2017) Structured light-field focusing for flowfield diagnostics. Exp Therm Fluid Sci 89:110–118
Brown YAI, Skews BW (2004) Three-dimensional effects on regular reflection in steady supersonic flows. Shock Waves 13:339–349
Bruce PJK, Burton DMF, Titchener NA, Babinsky H (2011a) Corner effect and separation in transonic channel flows. J Fluid Mech 679:247–262
Bruce PJK, Babinsky H, Tartinville B, Hirsch C (2011b) Corner effect and asymmetry in transonic channel flows. AIAA J 49(11):2382–2392
Carroll BF, Dutton JC (1992) Multiple normal shock wave/turbulent boundary-layer interactions. J Propul Power 8(2):441–448
Dixon-Lewis G, Isles GL (1962) Sharp focusing schlieren systems for studies of flat flames. J Sci Instrum 39:148–151
Fish RW, Parnham K (1950) Focussing schlieren systems. Report CP-54. British Aeronautical Research Council
Förster FJ, Dröske NC, Bühler MN, von Wolfersdorf J, Weigand B (2016) Analysis of flame characteristics in a scramjet combustor with staged fuel injection using common path focusing schlieren and flame visualization. Combust Flame 168:204–215
Grauer SJ, Unterberger A, Rittler A, Daun KJ, Kempf AM, Mohri K (2018) Instantaneous 3D flame imaging by background-oriented schlieren tomography. Combust Flame 196:284–299
Handa T, Masuda M, Matsuo K (2005) Three-dimensional normal shock-wave/boundary-layer interaction in a rectangular duct. AIAA J 43(10):2182–2187
Handa T, Nakano A, Tanigawa K, Fujita J (2014) Supersonic mixing enhanced by cavity-induced three-dimensional oscillatory flow. Exp Fluids 55:1711
Hargather MJ, Lawson MJ, Settles GS (2009) Focusing-schlieren PIV measurements of a supersonic. In: 47th AIAA aerospace sciences meeting, 5–8 January, Orlando, Florida, AIAA 2009-69
Ishino Y, Hayashi N, Razak IFBA, Kato T, Kurimoto Y, Saiki Y (2016) 3D-CT (computer tomography) measurement of an instantaneous density distribution of turbulent flames with a multi-directional quantitative schlieren camera (reconstructions of high-speed premixed burner flames with different flow velocities). Flow Turbul Combust 96:819–835. https://doi.org/10.1007/s10494-015-9658-5
Kantrowitz A, Trimpi RL (1950) A sharp focusing schlieren system. J Aeronaut Sci 17:311–314
Kleine KH, Le CV, Takehara K, Etoh TG (2010) Time-resolved visualization of shock–vortex systems emitted from an open shock tube. J Vis 13:33–40
Kouchi T, Goyne CP, Rockwell RD (2015) Focusing schlieren visualization in a dual mode scramjet. Exp Fluids 56:211
Lee S, Loth E, Babinsky H (2011) Normal shock boundary layer control with various vortex generator geometries. Comput Fluids 49(1):233–246
Martínez-González A, Moreno-Hernández D, Guerrero-Viramontes JA, León-Rodríguez M, Zamarripa-Ramírez JCI, Carrillo-Delgado C (2019) Temperature measurement of fluid flows by using a focusing schlieren method. Sensors 19:12
Matsuo K, Kim HD (1993) Normal shock oscillations in supersonic diffusers. Shock Waves 3:25–33
Nicolas F, Todoroff V, Plyer A, Le Besnerais G, Donjat D, Micheli F, Champagnat F, Cornic P, Le Sant Y (2016) A direct approach for instantaneous 3D density field reconstruction from background oriented schlieren (BOS) measurements. Exp Fluids 57:13
Ota M, Kurihara K, Aki K, Miwa Y, Inage T, Maeno K (2015) Quantitative density measurement of the lateral jet/ cross-flow interaction field by colored-grid background-oriented schlieren (CGBOS) technique. Jl. of Visualization 18:543–552
Papamoschou D, Zill A (2009) Supersonic flow separation in planar nozzles. Shock Waves 19:171–183
Settles GS (2001) Schlieren and shadowgraph techniques: visualizing phenomena in transparent media. Springer, Berlin
Solomon C, Breckon T (2010) Fundamentals of digital image processing: a practical approach with examples in Matlab, chap 6. Wiley
Vaisakh S, Muruganandam TM (2017) Schlieren tomography to visualise three dimensional supersonic flows. In: Proceedings of the 31st international symposium on shock waves, July 9–14, Japan
Vaisakh S, Muruganandam TM (2018) Schlieren measurement of normal spanwise length of a bifurcated normal shock wave in a rectangular duct. Exp Thermal Fluid Sci 96:43–47
Weinstein LM (1993) Large-field high-brightness focusing schlieren system. AIAA J 31(7):1250–1255
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Vaisakh, S., Muruganandam, T.M. Affordable schlieren visualization methods for understanding three-dimensional supersonic flows. J Vis 23, 851–862 (2020). https://doi.org/10.1007/s12650-020-00662-x
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12650-020-00662-x