Abstract
The mechanical properties of Al-Cu-Mn casting alloy mainly depend on the morphology, distribution, size, and number of θ′(Al2Cu) precipitates. In this study, we have analyzed the effect of rare earth samarium (Sm) addition on the kinetics of precipitation in the Al-Cu-Mn casting alloy by using differential scanning calorimetry (DSC) and high-resolution transmission electron microscopy. Thermal effect peaks that are attributed to the formation and the dissolution of Guinier-Preston (GP) zone and θ′ phase were identified from the DSC curves. The activation energy of θ′ formation was calculated by using both the Kissinger method and the analytical model, and the corresponding results were compared. Results suggest that the activation energy of θ′ formation in Al-Cu-Mn alloy is dramatically higher than that in Al-Cu-Mn-Sm alloy. Accordingly, it is concluded that the addition of rare earth Sm decreases the activation energy of θ′ formation and promotes the formation of θ′ precipitates.
Similar content being viewed by others
References
M. Lalpoor, D.G. Eskin, and L. Katgerman, Fracture behavior and mechanical properties of high strength aluminum alloys in the as-cast condition, Mater. Sci. Eng. A, 497(2008), No. 1–2, p. 186.
G.S. Vinod Kumar, B.S. Murty, and M. Chakraborty, Development of Al-Ti-C grain refiners and study of their grain refining efficiency on Al and Al-7Si alloy, J. Alloys Compd., 396(2005), No. 1–2, p. 143.
S. Bai, Z.Y. Liu, Y.T. Li, Y.H. Hou, and X. Chen, Microstructures and fatigue fracture behavior of an Al-Cu-Mg-Ag alloy with addition of rare earth Er, Mater. Sci. Eng. A, 527(2010), No. 7-8, p. 1806.
D.M. Yao, W.G. Zhao, H.L. Zhao, F. Qiu, and Q.C. Jiang, High creep resistance behavior of the casting Al-Cu alloy modified by La, Scripta Mater., 61(2009), No. 12, p. 1153.
D.M. Yao, Z.H. Bai, F. Qiu, Y.J. Li, and Q.C. Jiang, Effects of La on the age hardening behavior and precipitation kinetics in the cast Al-Cu alloy, J. Alloys Compd., 540(2012), p. 154.
Z.W. Chen, P. Chen, and S.S. Li, Effect of Ce addition on microstructure of Al20Cu2Mn3 twin phase in an Al-Cu-Mn casting alloy, Mater. Sci. Eng. A, 532(2012), p. 606.
H.E. Kissinger, Reaction kinetics in differential thermal analysis, Anal. Chem., 29(1957), No. 11, p. 1702.
F. Liu, F. Sommer, and E.J. Mittemeijer, An analytical model for isothermal and isochronal transformation kinetics, J. Mater. Sci., 39(2004), No. 5, p. 1621.
S.J. Song, F. Liu, Y.H. Jiang, and H.F. Wang, Kinetics of solid-state transformation subjected to anisotropic effect: model and application, Acta Mater., 59(2011), No. 8, p. 3276.
F. Liu, S.J. Song, F. Sommer, and E.J. Mittemeijer, Evaluation of the maximum transformation rate for analyzing solid-state phase transformation kinetics, Acta Mater., 57(2009), No. 20, p. 6176.
F. Liu, F. Sommer, and E.J. Mittemeijer, Determination of nucleation and growth mechanisms of the crystallization of amorphous alloys; application to calorimetric data, Acta Mater., 52(2004), No. 11, p. 3207.
D. Ovono Ovono, I. Guillot, and D. Massinon, Determination of the activation energy in a cast aluminium alloy by TEM and DSC, J. Alloys Compd., 432(2007), No. 1-2, p. 241.
I.N.A. Oguocha and S. Yannacopoulos, Precipitation and dissolution kinetics in Al-Cu-Mg-Fe-Ni alloy 2618 and Al-alumina particle metal matrix composite, Mater. Sci. Eng. A, 231(1997), No. 1–2, p. 25.
A. Luo, D.J. Lloyd, A. Gupta, and W.V. Youdelis, Precipitation and dissolution kinetics in Al-Li-Cu-Mg alloy 8090, Acta Metall. Mater., 41(1993), No. 3, p. 769.
A. Gaber, A. Mossad Ali, K. Matsuta, T. Yamazaki, and S. Ikeno, Study of the developed precipitates in Al-0.63Mg-0.37Si-0.5Cu (wt.%) alloy by using DSC and TEM techniques, J. Alloys Compd., 432(2007), No. 1-2, p. 149.
S.K. Son, M. Takeda, M. Mitome, Y. Bando, and T. Endo, Precipitation behavior of an Al-Cu alloy during isothermal aging at low temperatures, Mater. Lett., 59(2005), No. 6, p. 629.
V.A. Phillips, High resolution electron microscope observations on precipitation in Al-3.0%Cu alloy, Acta Metall., 23(1975), No. 6, p. 751.
Z.W. Chen, P. Chen, and C.Y. Ma, Microstructures and mechanical properties of Al-Cu-Mn alloy with La and Sm addition, Rare Met., 31(2012), No. 4, p. 332.
M.J. Starink, Analysis of aluminium based alloys by calorimetry: quantitative analysis of reactions and reaction kinetics, Int. Mater. Rev., 49(2004), No. 3-4, p. 191.
M.J. Carr, An analysis of fivefold symmetry by microtwinning in rapidly solidified Al-Mn alloys, J. Appl. Phys., 59(1986), No. 4, p. 1063.
T. Ozawa, Kinetics of non-isothermal crystallization, Polymer, 12(1971), No. 3, p. 150.
H.S. Chen, A method for evaluating viscosities of metallic glasses from the rates of thermal transformations, J. Non Cryst. Solids, 27(1978), No. 2, p. 257.
H.J. Borchardt, Initial reaction rates from DTA, J. Inorg. Nucl. Chem., 12(1960), No. 3-4, p. 252.
E.J. Mittemeijer, Analysis of the kinetics of phase transformations, J. Mater. Sci., 27(1992), No. 15, p. 3977.
F. Liu, F. Sommer, C. Bos, and E.J. Mittemeijer, Analysis of solid state phase transformation kinetics: models and recipes, Int. Mater. Rev., 52(2007), No. 4, p. 193.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Chen, Zw., Tang, Mj. & Zhao, K. Effect of rare earth samarium addition on the kinetics of precipitation in Al-Cu-Mn casting alloy. Int J Miner Metall Mater 21, 155–161 (2014). https://doi.org/10.1007/s12613-014-0879-8
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12613-014-0879-8