Abstract
Continuous SiC fiber reinforced Ti-Al based intermetallic alloys were prepared by sintering pure Ti and Al foils as well as SiC fibers. Owing to a complex self-propagating combustion reaction and diffusion reactions occurring during sintering process, the emphasis of the present paper is on identifying the interfacial products between SiC fibers and matrix, which is crucial for the mechanical properties of the sintered materials. Microstructure observation reveals that the sintered alloys contain lamellar matrix and SiC fibers with various interfacial products. The lamellar matrix compose chicly of TiAl3, TiAl2, TiAl, Ti3Al and α-Ti phases, the SiC fibers locate in TiAl3/TiAl layer and/or Ti3Al/α-Ti layer. The Al content is very little in the interfacial reaction zone. The main interfacial products are considered to mainly be compounds of Ti5Si3C x , Ti3AlC, and Al4C3Si x , etc. The interfacial reaction layer in the Ti-rich phase (Ti3Al and α-Ti) is thicker than in the Al-rich phase layer (TiAl3, TiAl2 and TiAl).
Similar content being viewed by others
References
Hiroshi Fukutomi, Mizuki Nakamura, and Tetsuya Suzuki, Void formation by the reaction diffusion of titunium and aluminum foils, Materials Transaction, JIM, 2000, 41(9): 1244.
Hiroshi Fukutomi, Masayasu, and Mizuki Nakamura, Production of TiAl sheet with oriented lamellar microstructure by diffusional reaction of aluminum and textured titanium foils, Materials Transaction, JIM, 1999, 40(7): 654.
Lee T.W., and Lee C.H., The effect of heating rate on the reaction sintering of Ti-48%Al elemental powder mixture, Journal of Materials Science, 1998, 17: 1367.
Fu E.K.Y., Rawlings R.D., and Mcshane H.B., Reaction synthesis of titanium aluminides, Journal of Materials Science, 2001, 36: 5537.
Xun Y.W., Tan M.J., and Zhou J.T., Processing and interface stability of SiC fiber reinforced Ti-15V-3Cr matrix composites, Journal of Materials Processing Technology, 2000, 102: 215.
Fromentin J.F., Debray K., and Petitcorps Y.Le., Interfacial zone design in the titanium-matrix composites reinforced by SiC filaments, Composites Science and Technology 1996, 56: 767.
Lv Xianghong, Yang Yanqing, and Ma Zhijun, Kinetics and mechanism of interfacial reaction in SCS-6 SiC continuous fiber-reinforced Ti-Al intermetallic matrix composites, Trans. Nonferrous Met. Soc. China, 2006, 16: 77.
Sarala Djanarthany, Jean-Claude Viala, and Jean Bouix, Development of SiC/TiAl composites: processing and interfacial phenomena, Materials Science and Engineering, 2001, 300(A): 211.
Guo Z.X., and Derby B., Solid-state fabrication and interfaces of fiber reinforced metal matrix composites, Progress in Materials Science, 1995, 39: 411.
Che H.C., and Fan Q.C., Microstructural evolution during the ignition/quenching of pre-heated Ti/3Al powders, Journal of Alloys and Compounds, 2009, 475: 184.
Fu E Ky, Rawlinqs R.D., and Mcshane H.B., Reaction synthesis of titanium aluminides, J. Mater. Sci., 2001, 36: 5537.
Yang Bing, Manufacturing of TiAl based alloy through element powder process, Powder Metallurgy Technology, 1999, 17(4): 286.
German R.M., Sintering theory and practice, Jone Wiley and Sons Inc., New York, 1996. 197.
Jean-Francois, Silvain, Jean-Claude, and Bihr., EPMA and XPS studies of TiAl-SiC interfacial chemical compatibility, Composites Part A, 1996, 27(A): 691.
Zhang Guoxing, Kang Qiang, and Li Geping, Interfacial reaction of SiCf reinforced Ti-48Al-1.5Mn matrix composite, Acta Metallurgica Sinica, 39(3): 329.
Martineau P, Pailler R, and Lahave M, SiC filament/titanium matrix composites regarded as model composites(part2)-fiber/atrix chemical interactions at high temperature, Journal of Materials Science, 1984, 19: 749.
Wen Huang, Xu Nie, and Yuanming Xia, An experimental study on the in situ strength of SiC fiber in unidirectional SiC/Al composites, Composites: Part A, 2003, 34: 1161.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Zhang, D., Sun, Y., Zhao, Y. et al. Interfacial products in SiC fiber reinforced Ti-Al based intermetallic alloys. Rare Metals 30 (Suppl 1), 524–528 (2011). https://doi.org/10.1007/s12598-011-0338-x
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12598-011-0338-x