Abstract
Electrochemical codeposition of Mg-Li alloys on molybdenum electrodes was investigated in LiCl-KCl (50 wt.%:50 wt.%) melts containing different concentrations of MgCl2 at 973 K. Cyclic voltammograms show that the underpotential deposition of lithium on pre-deposited magnesium leads to the formation of liquid Mg-Li alloys. The deposition potentials of Mg(II) and Li(I) ions gradually near each other with MgCl2 concentration decreasing. Mg-Li alloys with typical α + β phases could be obtained by potentiostatic electrolysis from LiCl-KCl melts containing 5 wt.% MgCl2 at −2.25 V vs. Ag/AgCl (cathodic current density 1.70 A·cm−2) for 2.5 h. α phase, α + β phases, and β phase Mg-Li alloys with different lithium contents were obtained by potentiostatic electrolysis from LiCl-KCl melts with the different concentrations of MgCl2. The samples were characterized by X-ray diffraction and scanning electron microscopy.
Similar content being viewed by others
References
Elkin F.M. and Davydov V.G., Superplasticity in hot-rolled magnesium alloy sheets, [in] Magnesium-Proceedings of the 6th International Conference on Magnesium Alloys and Their Applications, John Wiley & Sons Inc., Weinheim, 2004: 94.
Drozd Z., Trojanová Z., and Kúdela S., Deformation behaviour of Mg-Li-Al alloys, J. Alloys Compd., 2004, 378: 192.
Sanschagrin A., Tremblay R., Angers R., and Dube D., Mechanical properties and microstructure of new magnesium-lithium base alloys, Mater. Sci. Eng. A, 1996, 220: 69.
Massalski T.B., Murray J.L., Benett L.H., and Baker H., Binary Alloy Phase Diagrams, American Society for Metals, New York, 1990: 112.
Yan Y.D., Zhang M.L., Han W., Cao D.X., Yuan Y., Xue Y., and Chen Z., Electrochemical formation of Mg-Li alloys at solid magnesium electrode from LiCl-KCl melts, Electrochim. Acta, 2008, 53: 3323.
Trojanová Z., Drozd Z., Kúdela S., Szaráz Z., and Lukáč P., Strengthening in Mg-Li matrix composites, Compos. Sci. Technol., 2007, 67: 1965.
Smolinski J., Mg-Li by electrolysis in molten salt at the temperature of 773 K, J. Appl. Chem., 1956, 6: 180.
Smolinski J., Hannam J.C., and Leach A.L., The preparation method of Mg-Li by electrolysis in molten salt at the temperature of 903 K, J. Appl. Chem., 1956, 6: 187.
Zhang M.L., Yan Y.D., Hou Z.Y., Fan L.A., Chen Z., and Tang D.X., Preparation of Mg-Li alloys by electrolysis in molten salt at low temperature, Chin. Chem. Lett., 2007, 18: 329.
Chen Z., Zhang M.L., Han W., Hou Z.Y., and Yan Y.D., Electrodeposition of Li and electrochemical formation of Mg-Li alloys from the eutectic LiCl-KCl, J. Alloys Compd., 2008, 464: 174.
Iida T., Nohira T., and Ito Y., Electrochemical formation of Sm-Co alloys by codeposition of Sm and Co in a molten LiCl-KCl-SmCl3-CoCl2 system, Electrochim. Acta, 2003, 48: 2517.
Iida T., Nohira T., and Ito Y., Electrochemical formation of Sm-Ni alloy films by Li codeposition method from chloride melts, Electrochim. Acta, 2001, 46: 2537.
Sanches L.S., Marino C.B., and Mascaro L.H., The codeposition of Fe and Mo from sulphate-citrate acid solutions, J. Alloys Compd., 2007, 439: 342.
Zell C.A. and Freyland W., NixAl1−x alloys via codeposition on Au from the Lewis acid room temperature molten salt, Chem. Phys. Lett., 2001, 337: 293.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Ye, K., Chen, Y. & Zhang, M. Electrochemical codeposition of typical α + β phases Mg-Li alloys from the molten LiCl-KCl-MgCl2 system. Rare Metals 29, 198–203 (2010). https://doi.org/10.1007/s12598-010-0034-2
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12598-010-0034-2