Abstract
This paper presents electrical power consumption decreased in actuating a shape memory alloy (SMA) based smart soft composite (SSC) actuator using pulse width modulation (PWM). A DC current input generator and a PWM signal generator were designed to apply inputs to SSCs. Experiments were carried out on two types of SSC: one conventional, using a single SMA wire, and the other using multiple wires. The blocking force was measured to analyze the performance of the SSC. The experiments demonstrated that the PWM signal was able to reduce the actuation energy while showing the same performance as an analog current input. These results suggest that a PWM signal could be an alternative candidate for the input paradigm for SSCs to reduce energy consumption, expanding the uses of SSC actuators in robotic applications.
Similar content being viewed by others
References
Otsuka, K. and Wayman, C. M., “Shape Memory Materials,” Cambridge University Press, 1999.
Jani, J. M., Leary, M., Subic, A., and Gibson, M. A., “A Review of Shape Memory Alloy Research, Applications and Opportunities,” Materials & Design, Vol. 56, pp. 1078–1113, 2014.
Baz, A., Chen, T., and Ro, J., “Shape Control of Nitinol-Reinforced Composite Beams,” Composites Part B: Engineering, Vol. 31, No. 8, pp. 631–642, 2000.
Büttgenbach, S., Bütefisch, S., Leester-Schädel, M., and Wogersien, A., “Shape Memory Microactuators,” Microsystem Technologies, Vol. 7, No. 4, pp. 165–170, 2001.
Ghomshei, M., Tabandeh, N., Ghazavi, A., and Gordaninejad, F., “A Three-Dimensional Shape Memory Alloy/Elastomer Actuator,” Composites Part B: Engineering, Vol. 32, No. 5, pp. 441–449, 2001.
Icardi, U., “Large Bending Actuator Made with SMA Contractile Wires: Theory, Numerical Simulation and Experiments,” Composites Part B: Engineering, Vol. 32, No. 3, pp. 259–267, 2001.
Chen, Q. and Levy, C., “Vibration Analysis and Control of Flexible Beam by Using Smart Damping Structures,” Composites Part B: Engineering, Vol. 30, No. 4, pp. 395–406, 1999.
Wang, Y., Zhou, L., Wang, Z., Huang, H., and Ye, L., “Analysis of Internal Stresses Induced by Strain Recovery in a Single SMA Fiber-Matrix Composite,” Composites Part B: Engineering, Vol. 42, No. 5, pp. 1135–1143, 2011.
Ahn, S.-H., Lee, K.-T., Kim, H.-J., Wu, R., Kim, J.-S., and Song, S.-H., “Smart Soft Composite: An Integrated 3D Soft Morphing Structure Using Bend-Twist Coupling of Anisotropic Materials,” Int. J. Precis. Eng. Manuf., Vol. 13, No. 4, pp. 631–634, 2012.
Kim, H.-J., Song, S.-H., and Ahn, S.-H., “A Turtle-Like Swimming Robot Using a Smart Soft Composite (SSC) Structure,” Smart Materials and Structures, Vol. 22, No. 1, Paper No. 014007, 2012.
Rodrigue, H., Wang, W., Bhandari, B., Han, M.-W., and Ahn, S.-H., “Cross-Shaped Twisting Structure Using SMA-Based Smart Soft Composite,” Int. J. Precis. Eng. Manuf.-Green Tech., Vol. 1, No. 2, pp. 153–156, 2014.
Wang, W., Rodrigue, H., and Ahn, S.-H., “Smart Soft Composite Actuator with Shape Retention Capability Using Embedded Fusible Alloy Structures,” Composites Part B: Engineering, Vol. 78, pp. 507–514, 2015.
Han, M.-W., Rodrigue, H., Cho, S., Song, S.-H., Wang, W., Chu, W.-S., and Ahn, S.-H., “Woven Type Smart Soft Composite for Soft Morphing Car Spoiler,” Composites Part B: Engineering, Vol. 86, pp. 285–298, 2016.
Rodrigue, H., Wang, W., Bhandari, B., Han, M.-W., and Ahn, S.-H., “SMA-Based Smart Soft Composite Structure Capable of Multiple Modes of Actuation,” Composites Part B: Engineering, Vol. 82, pp. 152–158, 2015.
Fujita, H., “Studies of Micro Actuators in Japan,” Proc. of IEEE International Conference on Robotics and Automation, pp. 1559–1564, 1989.
Kuribayashi, K., “Millimeter-Sized Joint Actuator Using a Shape Memory Alloy,” Sensors and Actuators, Vol. 20, Nos. 1-2, pp. 57–64, 1989.
Bellouard, Y., Clavel, R., Gotthardt, R., Bidaux, J., and Sidler, T., “A New Concept of Monolithic Shape Memory Alloy Micro-Devices Used in Micro-Robotics,” Proc. of International Conference on New Actuators-Bremen, pp. 502–505, 1998.
Van Brussel, H., Peirs, J., Reynaerts, D., Delchambre, A., Reinhart, G., et al., “Assembly of Microsystems,” CIRP Annals-Manufacturing Technology, Vol. 49, No. 2, pp. 451–472, 2000.
Kim, B., Lee, M. G., Lee, Y. P., Kim, Y., and Lee, G., “An Earthworm-Like Micro Robot Using Shape Memory Alloy Actuator,” Sensors and Actuators A: Physical, Vol. 125, No. 2, pp. 429–437, 2006.
Caldwell, D. and Taylor, P., “Artificial Muscles as Robotic Actuators,” Proc. of IFAC Robot Control Conference (Syroc 88), pp. 401–406, 2014.
Bundhoo, V. and Park, E. J., “Design of an Artificial Muscle Actuated Finger towards Biomimetic Prosthetic Hands,” Proc. of 12th International Conference on Advanced Robotics, pp. 368–375, 2005.
Safak, K. K. and Adams, G. G., “Modeling and Simulation of an Artificial Muscle and Its Application to Biomimetic Robot Posture Control,” Robotics and Autonomous Systems, Vol. 41, No. 4, pp. 225–243, 2002.
Rodrigue, H., Wei, W., Bhandari, B., and Ahn, S.-H., “Fabrication of Wrist-Like SMA-Based Actuator by Double Smart Soft Composite Casting,” Smart Materials and Structures, Vol. 24, No. 12, Paper No. 125003, 2015.
Cho, K.-J., Koh, J.-S., Kim, S., Chu, W.-S., Hong, Y., and Ahn, S.-H., “Review of Manufacturing Processes for Soft Biomimetic Robots,” Int. J. Precis. Eng. Manuf., Vol. 10, No. 3, pp. 171–181, 2009.
Baz, A., Imam, K., and McCoy, J., “Active Vibration Control of Flexible Beams Using Shape Memory Actuators,” Journal of Sound and Vibration, Vol. 140, No. 3, pp. 437–456, 1990.
Featherstone, R. and Teh, Y. H., “Improving the Speed of Shape Memory Alloy Actuators by Faster Electrical Heating,” Proc. of the Ninth International Symposium on Experimental Robotics, 2004.
Qiu, J., Tani, J., Osanai, D., and Urushiyama, Y., “High-Speed Actuation of Shape Memory Alloy,” Proc. of SPIE, Vol. 4235, pp. 188–197, 2001.
Carreras, G., Casciati, F., Casciati, S., Isalgue, A., Marzi, A., and Torra, V., “Fatigue Laboratory Tests toward the Design of SMA Portico-Braces,” Smart Structures and Systems, Vol. 7, No. 1, pp. 41–57, 2011.
Eggeler, G., Hornbogen, E., Yawny, A., Heckmann, A., and Wagner, M., “Structural and Functional Fatigue of NiTi Shape Memory Alloys,” Materials Science and Engineering: A, Vol. 378, No. 1, pp. 24–33, 2004.
Erbstoeszer, B., Armstrong, B., Taya, M., and Inoue, K., “Stabilization of the Shape Memory Effect in NiTi: An Experimental Investigation,” Scripta Materialia, Vol. 42, No. 12, pp. 1145–1150, 2000.
He, Y. and Sun, Q., “Frequency-Dependent Temperature Evolution in NiTi Shape Memory Alloy under Cyclic Loading,” Smart Materials and Structures, Vol. 19, No. 11, Paper No. 115014, 2010.
Tang, W. and Sandström, R., “Analysis of the Influence of Cycling on TiNi Shape Memory Alloy Properties,” Materials & Design, Vol. 14, No. 2, pp. 103–113, 1993.
Barr, M. and Modulation, P. W., “Embedded Systems Programming,” Embedded Systems Programming, Vol. 14, No. 10, pp. 103–104, 2001.
Holmes, D. G. and Lipo, T. A., “Pulse Width Modulation for Power Converters: Principles and Practice,” John Wiley & Sons, 2003.
LukiC, Z., Wang, K., and Prodic, A., “High-Frequency Digital Controller for DC-DC Converters Based on Multi-Bit/SplSigma/-/Spl Delta/Pulse-Width Modulation,” Proc. of 22th Annual IEEE Applied Power Electronics Conference and Exposition, pp. 35–40, 2005.
Hoang, K. D. and Ahn, H.-J., “Both Energy and Cost-Effective Semi-Active RFC (Reaction Force Compensation) Method for Linear Motor Motion Stage,” Int. J. Precis. Eng. Manuf.-Green Tech., Vol. 4, No. 1, pp. 73–78, 2017.
Ma, N. and Song, G., “Control of Shape Memory Alloy Actuator Using Pulse Width Modulation,” Smart Materials and Structures, Vol. 12, No. 5, Paper No. 712, 2003.
Song, G. and Ma, N., “Control of Shape Memory Alloy Actuators Using Pulse-Width Pulse-Frequency (PWPF) Modulation,” Journal of Intelligent Material Systems and Structures, Vol. 14, No. 1, pp. 15–22, 2003.
Mosley, M., Mavroidis, C., and Pfeiffer, C., “Design and Dynamics of a Shape Memory Alloy Wire Bundle Actuator,” Proc. of the ANS, 8th Topical Meeting on Robotics and Remote Systems, 1999.
Mosley, M. J. and Mavroidis, C., “Experimental Nonlinear Dynamics of a Shape Memory Alloy Wire Bundle Actuator,” Transactions-American Society of Mechanical Engineers Journal of Dynamic Systems Measurement and Control, Vol. 123, No. 1, pp. 103–112, 2001.
De Laurentis, K. J., Fisch, A., Nikitczuk, J., and Mavroidis, C., “Optimal Design of Shape Memory Alloy Wire Bundle Actuators,” Proc. of IEEE International Conference on Robotics and Automation, pp. 2363–2368, 2002.
Cho, K.-J. and Asada, H., “Multi-Axis SMA Actuator Array for Driving Anthropomorphic Robot Hand,” Proc. of IEEE International Conference on Robotics and Automation, pp. 1356–1361, 2005.
Danalloy, Inc., “Technical Characteristics of FLEXINOL Actator Wires,” http://www.dynalloy.com/pdfs/TCF1140.pdf (Accessed 25 APR 2017)
Guide, M. U. S., “The Mathworks, Inc.,” Natick, MA, Vol. 5, 1998.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Kim, M., Shin, YJ., Lee, JY. et al. Pulse width modulation as energy-saving strategy of shape memory alloy based smart soft composite actuator. Int. J. Precis. Eng. Manuf. 18, 895–901 (2017). https://doi.org/10.1007/s12541-017-0106-4
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12541-017-0106-4