Abstract
Laser welding is an important process for fabricating complex components involving NiTi shape memory alloy. As welding is a thermal process, the amount of heat input and the rate of cooling have significant impact on the microstructure and hence the resultant characteristics of NiTi. In this study, the effect of laser welding and post-weld-annealing from 573 K to 1173 K on the thermal phase transformation behaviors, tensile deformation and micro-hardness characteristics of the laser-welded NiTi thin foils were investigated. It was found that the as-welded sample exhibited inferior super-elasticity compared to the base material, and the super-elasticity could be partially restored by annealing at 573 K. On the other hand, annealing of the weldment above the recrystallization temperature would lower the super-elasticity.
Similar content being viewed by others
References
T. Duerig, A. Pelton, and D. Stockel, Mater. Sci. Eng. A 273–275, 149 (1999).
N. B. Morgan, Mater. Sci. Eng. A 378, 16 (2004).
B. Bundara, M. Tokuda, B. Kuselj, B. Ule, and J. V. Tuma, Met. Mater. Int. 6, 293 (2000).
I. S. Ahn, S. Y. Bae, and Y. Y. Kim, Met. Mater. Int. 10, 39 (2004).
W. Kim, N. R. Kim, I. Y. Ko, S. W. Cho, and J. S. Park, Met. Mater. Int. 17, 239 (2011).
X. M. He and L. J. Rong, Met. Mater. Int. 12, 279 (2006).
K. Otsuka and C. M. Wayman: Shape Memory Materials, pp.50–62, Cambridge University Press, Cambridge, United Kingdom (1998).
H. Gugel, A. Schuermann, and W. Theisen, Mater. Sci. Eng. A 481–482, 668 (2008).
A. Tam, M. I. Khan, and Y. Zhou, Metall. Mater. Tran. A 42, 2166 (2011).
A. Falvo, F. M. Furgiuele, and C. Maletta, Mater. Sci. Eng. A 421, 235 (2005).
A. Tuissi, S. Besseghini, T. Ranucci, F. Squatrito, and M. Pozzi, Mater. Sci. Eng. A 273–275, 813 (1999).
Y. Ogata, M. Takatugu, T. Kunimasa, K. Uenishi, and K. F. Kobayashi, Mater. Trans. 45, 1070 (2004).
C. W. Chan and H. C. Man, Opt. Las. Eng. 49, 121 (2011).
T. D. Park, K. K. Baek, and D. S. Kim, Met. Mater. Int. 3, 46 (1997).
S. Kim, J. Lee, B. Hwang, C. G. Lee, and C. Lee, Met. Mater. Int. 17, 137 (2011).
S. J. Kim and K. M. Moon, Met. Mater. Int. 8, 387 (2002).
X. J. Yan, D. Z. Yang, and X. P. Liu, Mater. Char. 58, 263 (2007).
C. W. Chan, H. C. Man, and T. M. Yue, Metall. Mater. Tran. A 42, 2267 (2011).
C. P. Frick, A. M. Ortega, J. Tyber, A. Maksound, H. J. Maier, Y. Liu, and K. Gall, Mater. Sci. Eng. A 405, 40 (2005).
D. Chrobak, D. Stroz, and H. Morawiec, Scripta Mater. 48, 576 (2003).
P. Filip and K. Mazanec, Scripta Mater. 45, 706 (2001).
J. Khalil-Allafi, A. Dlouhy, and G. Eggeler, Acta Mater. 50, 4273 (2002).
M. Carroll, C. Somsen, and G. Eggeler, Scripta Mater. 50, 187 (2004).
J. L. Proft, K. N. Melton, and T. W. Duerig, Proc. Int. Conf. on Martensitic Transformations (eds. I. Tamura), p.742, The Japan Inst. Metals, Nara, Japan (1986).
K. Gall, H. Sehitoglu, Y. Chumlyakov, and I. Kireeva, Acta Mater. 47, 1216 (1999).
K. S. Kim, K. K. Jee, W. C. Kim, W. Y. Jang, and S. H. Han, Mater. Sci. Eng. A 481–482, 661 (2008).
F. T. Cheng, J. Mater. Sci. Technol. 20, 700 (2004).
X. J. Yan, D. Z. Yang, and M. Qi, Mater. Char. 57, 59 (2006).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Chan, CW., Man, HC. & Yue, TM. Effect of post-weld-annealing on the tensile deformation characteristics of laser-welded NiTi thin foil. Met. Mater. Int. 18, 691–697 (2012). https://doi.org/10.1007/s12540-012-4019-6
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12540-012-4019-6