Abstract
The tableting of fruit powders is gaining popularity due to conveniences in its use, storage, transportation, and product formulation. Food powders are generally cohesive in nature, and their compressibility is highly correlated with the material properties of the powder. Here, the material properties of fruit powders and their respective compressibilities in relation to powder type, drying technique and their operating parameters, portion of the fruit used to produce the fruit powder, and drying aids are discussed. Among the material properties analyzed, moisture content, water activity, particle density, particle size and shape, and powder surface properties are identified as vital properties that highly influence the tableting behavior of fruit powders. The Kawakita and Lüdde model and Heckel equation are widely studied to describe the compressibility and compactibility of fruit powders. A four-parameter model fits the sigmoidal compression data of food powders well.
Similar content being viewed by others
References
Abdel-Hamid, SM (2011) Instrumentation of tableting machines: high speed compaction investigation through simulation and radial die-wall pressure monitoring. PhD Dissertation, University of Basel, Switzerland
Adedokun MO, Itiola OA (2010) Material properties and compaction characteristics of natural and pregelatinized forms of four starches. Carbohydr Polym 79(4):818–824
Adhikari B, Howes T, Wood B, Bhandari B (2009) The effect of low molecular weight surfactants and proteins on surface stickiness of sucrose during powder formation through spray drying. J Food Eng 94(2):135–143
Adiba BD, Salem B, Nabil S, Abdelhakim M (2011) Preliminary characterization of food tablets from date (Phoenix dactylifera L.) and spirulina (Spirulina sp.) powders. Powder Technol 208(3):725–730
Ahmad MZ, Akhter S, Anwar M, Rahman M, Siddiqui MA, Ahmad FJ (2012) Compactibility and compressibility studies of Assam Bora rice starch. Powder Technol 224:281–286
Ajila C, Aalami M, Leelavathi K, Rao UP (2010) Mango peel powder: a potential source of antioxidant and dietary fiber in macaroni preparations. Innov Food Sci Emerg Technol (1, 1):219–224
Alamilla-Beltran L, Chanona-Perez JJ, Jimenez-Aparicio AR, Gutierrez-Lopez GF (2005) Description of morphological changes of particles along spray drying. J Food Eng 67(1):179–184
Alezandro MR, Dubé P, Desjardins Y, Lajolo FM, Genovese MI (2013) Comparative study of chemical and phenolic compositions of two species of jaboticaba: Myrciaria jaboticaba (Vell.) Berg and Myrciaria cauliflora (Mart.) O. Berg. Food Res Int 54(1):468–477
Athmaselvi K, Kumar C, Balasubramanian M, Roy I (2014) Thermal, structural, and physical properties of freeze dried tropical fruit powder. J Food Process 2014:1–10
Barbosa-Cánovas GV, Juliano P (2005) Compression and compaction characteristics of selected food powders. Adv Food Nutr Res 49:233–307
Berggren J, Frenning G, Alderborn G (2004) Compression behaviour and tablet-forming ability of spray-dried amorphous composite particles. Eur J Pharm Sci 22(2):191–200
Bhandari B (2013) Introduction to food powders. Handbook of Food Powders: Processes and Properties. Sawston, Cambridge, UK, Woodhead Publishing 1:1–26
Bhandari B, Howes T (1999) Implication of glass transition for the drying and stability of dried foods. J Food Eng 40(1):71–79
Bhandari BR, Datta N, Howes T (1997) Problems associated with spray drying of sugar-rich foods. Dry Technol 15(2):671–684
Caparino O, Tang J, Nindo C, Sablani S, Powers J, Fellman J (2012) Effect of drying methods on the physical properties and microstructures of mango (Philippine ‘Carabao’ var.) powder. J Food Eng 111(1):135–148
Carr RL (1965) Evaluating flow properties of solids. Chem Eng J 72:163–168
Ceballos AM, Giraldo GI, Orrego CE (2012) Effect of freezing rate on quality parameters of freeze dried soursop fruit pulp. J Food Eng 111(2):360–365
Chantaro P, Devahastin S, Chiewchan N (2008) Production of antioxidant high dietary fiber powder from carrot peels. LWT–Food Sci Technol 41(10):1987–1994
Chegini G, Ghobadian B (2005) Effect of spray-drying conditions on physical properties of orange juice powder. Dry Technol 23(3):657–668
Chomto P, Nunthanid J (2017) Physicochemical and powder characteristics of various citrus pectins and their application for oral pharmaceutical tablets. CarbohydrPolym 174:25–31
Cynthia S, Bosco JD, Bhol S (2015) Physical and structural properties of spray dried tamarind (Tamarindus indica L.) pulp extract powder with encapsulating hydrocolloids. Int J Food Prop 18(8):1793–1800
da Silva LB, Queiroz MB, Fadini AL, Da Fonseca RC, Germer SP, Efraim P (2016) Chewy candy as a model system to study the influence of polyols and fruit pulp (açai) on texture and sensorial properties. LWT–Food Sci Technol 65:268–274
Davies R (1984) Particle size measurement: experimental techniques. In: Fayen ME, Otten L (eds) Handbook of powder science and technology. Van Nostrand Reinhold, New York
Fang Z, Bhandari B (2011) Effect of spray drying and storage on the stability of bayberry polyphenols. Food Chem 129(3):1139–1147
Fang Z, Bahandari B (2012) Comparing the efficiency of protein and maltrodextrin on spray-drying of bayberry juice. Food Res Int 48:478–483
Fan F, Roos YH (2017) Glass transition-associated structural relaxations and applications of relaxation times in amorphous food solids: a review. Food Eng Rev 9:257–270
Farahnaky A, Mansoori N, Majzoobi M, Badii F (2016) Physicochemical and sorption isotherm properties of date syrup powder: antiplasticizing effect of maltodextrin. Food Bioprod Process 98:133–141
Finney J, Buffo R, Reineccius G (2002) Effects of type of atomization and processing temperatures on the physical properties and stability of spray dried flavors. J Food Sci 67(3):1108–1114
Fitzpatrick JJ, Ahrné L (2005) Food powder handling and processing: industry problems, knowledge barriers and research opportunities. Chem Eng Process 44(2):209–214
Goula AM, Adamopoulos KG (2008) Effect of maltodextrin addition during spray drying of tomato pulp in dehumidified air: II. Powder properties. Dry Technol 26(6):726–737
Goula AM, Adamopoulos KG (2010) A new technique for spray drying orange juice concentrate. Innov Food Sci Emerg Technol 11(2):342–351
Gurak PD, De Bona GS, Tessaro IC, Marczak LDF (2014) Jaboticaba pomace powder obtained as a co-product of juice extraction: a comparative study of powder obtained from peel and whole fruit. Food Res Int 62:786–792
Hausner H (1967) Friction conditions in a mass of metal powder. Int J Powder Metall 3:7–13
Heckel R (1961) Density-pressure relationships in powder compaction. Trans Metall Soc AIME 221(4):671–675
Hiestand E, Wells J, Peot C, Ochs J (1977) Physical processes of tableting. J Pharm Sci 66(4):510–519
Islam M, Kitamura Y, Yamano Y, Kitamura M (2016) Effect of vacuum spray drying on the physicochemical properties, water sorption and glass transition phenomenon of orange juice powder. J Food Eng 169:131–140
Jiang H, Zhang M, Adhikari B, Bhandari B, Bansal N, Schuck P (2013) Fruit and vegetable powders. In: Bhandari B, Bansal N, Zhang H, Schuck P (eds) Handbook of food powders: processes and properties. Woodhead Publishing, Cambridge, pp 532–552
Kawakita K, Lüdde KH (1971) Some considerations on powder compression equations. Powder Technol 4(2):61–68
Kawakita K, Tsutsumi Y (1966) A comparison of equations for powder compression. Bull Chem Soc Jpn 39(7):1364–1368
Kim EH, Chen XD, Pearce D (2005) Effect of surface composition on the flowability of industrial spray-dried dairy powders. Colloids Surf B Biointerfaces 46(3):182–187
Krokida M, Maroulis Z (1997) Effect of drying method on shrinkage and porosity. Dry Technol 15(10):2441–2458
Kwapińska M, Zbiciński I (2005) Prediction of final product properties after cocurrent spray drying. Dry Technol 23(8):1653–1665
Lee KH, Wu TY, Siow LF (2013) Spray drying of red (Hylocereus polyrhizus) and white (Hylocereus undatus) dragon fruit juices: physicochemical and antioxidant properties of the powder. Int J Food Sci Technol 48(11):2391–2399
Leuenberger H, Rohera BD (1986) Fundamentals of powder compression. I. The compactibility and compressibility of pharmaceutical powders. Pharm Res 3(1):12–22
Lewis MJ (1987) Physical properties of foods and food processing systems. Ellis Horwood Ltd., Chichester
Maidannyk VA, Roos YH (2016) Modification of the WLF model for characterization of the relaxation timetemperature relationship in trehalose-whey protein isolates systems. J Food Eng 188:21–31
Marabi A, Mayor G, Raemy A, Bauwens I, Claude J, Burbidge AS, Saguy IS (2007) Solution calorimetry: a novel perspective into the dissolution process of food powders. Food Res Int 40(10):1286–1298
Nijdam J, Langrish T (2006) The effect of surface composition on the functional properties of milk powders. JFood Eng 77(4):919–925
Nindo C, Feng H, Shen G, Tang J, Kang D (2003) Energy utilization and microbial reduction in a new film drying system. J Food Process Preserv 27(2):117–136
Nordström J, Klevan I, Alderborn G (2012) A protocol for the classification of powder compression characteristics. Eur JPharmBiopharm 80(1):209–216
Nualkaekul S, Deepika G, Charalampopoulos D (2012) Survival of freeze dried Lactobacillus plantarum in instant fruit powders and reconstituted fruit juices. Food Res Int 48(2):627–633
Nuebel C, Peleg M (1994) A research note compressive stress-strain relationships of agglomerated instant coffee. J Food Process Eng 17(4):383–400
Ong M, Yusof YA, Aziz MG, Chin NL, Amin NM (2014) Characterisation of fast dispersible fruit tablets made from green and ripe mango fruit powders. J Food Eng 125:17–23
Palzer S, Dubois C, Gianfrancesco A (2012) Generation of product structures during drying of food products. Dry Technol 30(1):97–105
Peleg M, Mannheim C, Passy N (1973) Flow properties of some food powders. J Food Sci 38(6):959–964
Peleg M (1977) Flowability of food powders and methods for its evaluation—a review. J Food Process Eng 1(4):303–328
Phisut N (2012) Spray drying technique of fruit juice powder: some factors influencing the properties of product. Int Food Res J 19(4):1297–1306
Pitt K, Sinka IC (2007) Chapter 16: tableting. In: Salam AD, Hounslow ML, Seville JPK (eds) Granulation (Hand Book of Powder Technology, Volume 11). Elsevier, Amsterdam
Podczeck F, Sharma M (1996) The influence of particle size and shape of components of binary powder mixtures on the maximum volume reduction due to packing. Int J Pharm 137(1):41–47
Prakash SS, Patra N, Santanu C, Kumar PH, Patro J, Devi V (2011) Studies on flowability, compressibility and in-vitro release of Terminalia chebula fruit powder tablets. Iran J Pharm Res 10(3):393–401
Prigge JD, Sommer K (2011) Numerical investigation of stress distribution during die compaction of food powders. Part Sci Technol 29(1):40–52
Roos YH, Fryer PJ, Knorr D, Schuchmann HP, Schroën K, Schutyser MAI, Trystram G, Windhab EJ (2016) Food engineering at multiple scales: Case studies, challenges and the future-a European perspective. Food Eng Rev 8(91):91–115
Saifullah M, Yusof YA, Chin NL, Aziz M, Mohammed PM, Aziz N (2014) Tableting and dissolution characteristics of mixed fruit powder. Agric Agric Sci Procedia 2:18–25
Saifullah M, Yusof YA, Chin NL, Aziz MG, Mohammed PM, Aziz N (2016a) Dissolution profiling and its comparison of natural fruit powder effervescent tablets. J Food Eng 178:60–70
Saifullah M, Yusof YA, Chin NL, Aziz M (2016b) Physicochemical and flow properties of fruit powder and their effect on the dissolution of fast dissolving fruit powder tablets. Powder Technol 301:396–404
Saikia S, Mahnot NK, Mahanta CL (2015) Effect of spray drying of four fruit juices on physicochemical, phytochemical and antioxidant properties. J Food Process Preserv 39(6):1656–1664
Santhalakshmy S, Bosco SJD, Francis S, Sabeena M (2015) Effect of inlet temperature on physicochemical properties of spray-dried jamun fruit juice powder. Powder Technol 274:37–43
Schubert H (1987) Food particle technology. Part I: properties of particles and particulate food systems. Journal of Food Engineering 6:22–26
Shamsudin I, Anuar M, Tahir S (2012) Compaction of sweet potato (Ipomoea Batatas L.) and stevia rebaudiana food powders. Part Sci Technol 30(2):136–144
Shapiro I (1971) Compaction of powders 10. Development of a general compaction equation. Adv Powder Metall Particle Mater 3:229–243
Skonecki S, Kulig R, Łysiak G (2014) Models of pressure compaction and their application for wheat meal. Acta Agrophysica 28(1):125–130
Taufiq A, Yusof YA, Chin NL, Othman SH, Serikbayeva A, Aziz MG (2014) In-vitro dissolution of compressed tamarind and pineapple powder tablets. Agric Agric Sci Procedia 2:53–59
Tonon RV, Brabet C, Hubinger MD (2008) Influence of process conditions on the physicochemical properties of açai (Euterpe oleraceae Mart.) powder produced by spray drying. J Food Eng 88(3):411–418
Tonon RV, Freitas SS, Hubinger MD (2011) Spray drying of açai (Euterpe oleraceae Mart.) juice: effect of inlet air temperature and type of carrier agent. J Food Process Preserv 35(5):691–700
Tze NL, Han CP, Yusof YA, Chin NL, Talib RA, Taip FS, Aziz MG (2012) Physicochemical and nutritional properties of spray-dried pitaya fruit powder as natural colorant. Food Sci Biotechnol 21(3):675–682
Vardin H and Yasar M (2012). Optimisation of pomegranate (Punica Granatum L.) juice spray‐drying as affected by temperature and maltodextrin content. Int J Food Sci Technol 47(1):167–176
Verma A, Singh SV (2015) Spray drying of fruit and vegetable juices—a review. Crit Rev Food Sci Nutr 55(5):701–719
Walton D (2000) The morphology of spray-dried particles: a qualitative view. Drying Techol 18(9):1943–1986
Widodo RT, Hassan A (2015) Compression and mechanical properties of directly compressible pregelatinized sago starches. Powder Technol 269:15–21
Wu LC, Hsu HW, Chen YC, Chiu CC, Lin YI, Ho JAA (2006) Antioxidant and antiproliferative activities of red pitaya. Food Chem 95(2):319–327
Xu Y Y, Howes T, Adhikari B and Bhandari B (2012) Investigation of relationship between surface tention of feed solution containing various proteins and surface composition and morphology of powder particles. Drying Technology 30(14):1548–1562
Yan H, Barbosa-Canovas G (1997) Compression characteristics of agglomerated food powders: Effect of agglomerate size and water activity Características de la compresión de alimentos en polvo: Efecto del tamaño del aglomerado y del contenido de humedad. Food Sci Technol Int 3(5):351–359
Yan H, Barbosa-Cánovas G (2001) Attrition evaluation for selected agglomerated food powders: the effect of agglomerate size and water activity. J Food Process Eng 24(1):37–49
Young PM, Chiou H, Tee T, et al. (2007) The use of organic vapour sorption to determine the low levels of amorphous content in process pharmaceutical powders. Drug Dev Ind Pharm 33:91–97
Yousefi S, Emam-Djomeh Z, Mousavi S (2011) Effect of carrier type and spray drying on the physicochemical properties of powdered and reconstituted pomegranate juice (Punica Granatum L.) J Food Sci Technol 48(6):677–684
Yusof YA, Smith AC, Briscoe BJ (2005) Roll compaction of maize powder. Chem Eng Sci 60(14):3919–3931
Yusof YA, Mohd Salleh F, Chin NL, Talib RA (2012) The drying and tabletting of pitaya powder. J Food Process Eng 35(5):763–771
Zea LP, Yusof YA, Aziz MG, Chin NL, Amin NAM (2013) Compressibility and dissolution characteristics of mixed fruit tablets made from guava and pitaya fruit powders. Powder Technol 247:112–119
Zhao X, Yang Z, Gai G, Yang Y (2009) Effect of superfine grinding on properties of ginger powder. J Food Eng 91(2):217–222
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Aziz, M.G., Yusof, Y.A., Blanchard, C. et al. Material Properties and Tableting of Fruit Powders. Food Eng Rev 10, 66–80 (2018). https://doi.org/10.1007/s12393-018-9175-0
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12393-018-9175-0