Abstract
Advances in sport equipment have revolutionized athletic competition with engineers developing equipment that can enhance performance. However, not all athletes are able to benefit from the new, ideal equipment, with some athletes performing worse. Although the engineering may be sound, the interaction between the piece of equipment, the athlete, and the action is missing. The purely mechanical system of the piece of equipment becomes a biomechanical system once it is interacting with the athlete. Research into the underlying mechanisms of performance in sport has relied heavily on biomechanical studies. The review of these studies has identified important performance and injury variables that can be influenced by sport equipment. This baseline information helps provide a fundamental understanding of human performance that guide equipment designers and developers. A flawlessly engineered mechanical piece of sport equipment can still fail if the athlete–equipment interaction is not properly addressed in the design process. How an athlete uses a piece of equipment and furthermore how an athlete may change or adapt to changes in properties of a piece of equipment must be taken into consideration. Using properties of footwear as an example, research has provided understanding of the biomechanical limiting factors regarding the influence of footwear traction on athletic performance. Data on other footwear properties such as cushioning and forefoot bending stiffness are limited. Intrinsic musculoskeletal properties, such as the force–length and force–velocity relationships of skeletal muscle, can be exploited through equipment design, as has been shown during cycling. Modifications to equipment parameters can shift the operating range of an athlete within these relationships to maximize force or power output, which was shown during the development of the clap skate. Additionally, these properties vary slightly from athlete to athlete and minor adjustments to a piece of sporting equipment can help optimize individual athletes according to their specific biomechanical characteristics.
Similar content being viewed by others
References
Iwatsubo T, Kawamura S, Miyamoto K, Yamaguchi T (2000) Numerical analysis of golf club head and ball at various impact points. Sports Eng 3:195–204
Maeda M (2011) Effects of baseball bat mass and position of center of gravity on batting. Procedia Eng 2:2675–2680
Eftaxiopoulou T, Narayanana A, Dear JP, Bull AMJ (2011) A performance comparison between cricket bat designs. Proc Inst Mech Eng 226:16–23
Nicolls RL, Elliot BC, Miller K, Koh M (2003) Bat kinematics in baseball: implications for ball exit velocity and player safety. J Appl Biomech 19:283–294
Worobets JT, Wannop JW, Tomaras E, Stefanyshyn DJ (2014) Softer and more resilient running shoe cushioning properties enhance running economy. Footwear Sci 6(3):147–153
Kenny IC, Wallace ES, Brown D, Otto SR (2006) Validation of a full-body computer simulation of the golf drive for clubs of differing length. The engineering of sport 6. Springer, New York, pp 11–16
Suzuki S, Inooka H (1998) A new golf-swing robot model utilizing shaft elasticity. J Sound Vib 217(1):17–31
Ming A, Kajitani M (2003) A new golf swing robot to simulate human skill—accuracy improvement of swing motion by learning control. Mechatronics 13:809–823
Pearsall D, Hodges A, Wu T-C, Turcotte R, Lefebvre R, Montgomery D, Bateni H (2001) The performance of the ice hockey slap shot: the effects to stick construction and player skill. In: Blackwell & Sanders JR (ed) Proceedings of the international symposium on biomechanics in sport XIX, pp 74–77
Worobets JT, Fairbairn JC, Stefanyshyn DJ (2006) The influence of shaft stiffness on potential energy and puck speed during wrist and slap shots in ice hockey. Sports Eng 9(4):191–200
Worobets JT, Stefanyshyn DJ (2008) Shaft stiffness: implications for club fitting. In: Crew D, Lutz R (ed) Science and Golf V. Proceedings of the World Scientific Congress of Golf, pp 431–437
Haeufle DFB, Worobets JT, Wright I, Haeufle J, Stefanyshyn DJ (2012) Golfers do not respond to changes in shaft mass properties in a mechanically predictable way. Sports Eng 15:215–220
Hennig EM, Sterzing T (2010) The influence of soccer shoe design on playing performance: a series of biomechanical studies. Footwear Sci 2(1):3–11
Sterzing T, Muller C, Hennig EM, Milani TL (2009) Actual and perceived running performance in soccer shoes: a series of eight studies. Footwear Sci 1(1):5–17
Wannop JW, Worobets JT (2013) Influence of basketball shoe mass, traction and bending stiffness on athletic performance. Footwear Sci 5(S1):S98–S100
Luo G, Stefanyshyn DJ (2011) Identification of critical traction values for maximum athletic performance. Footwear Sci 3(3):127–138
Stefanyshyn DJ, Lee J-S, Park S-K (2010) The influence of soccer cleat design on resultant joint moments. Footwear Sci 2(1):13–19
Wannop JW, Worobets JT, Stefanyshyn DJ (2010) Footwear traction and lower extremity joint loading. Am J Sport Med 38:1221–1228
Wannop JW, Luo G, Stefanyshyn DJ (2013) Footwear traction and lower extremity noncontact injury. Med Sci Sport Exer 45(11):2137–2143
Luo G (2012) Limiting factors for curved sprinting performance. Dissertation, University of Calgary
Greene PR (1985) Running on flat turns: experiments, theory, and applications. J Biomech Eng 107:96–103
Usherwood JR, Wilson AM (2006) Accounting foe elite indoor 200m sprint results. Biol Lett 2:47–50
Chang Y-H, Kram R (2007) Limitations to maximum running speed on flat curves. J Exp Biol 210:971–982
Luo G, Stefanyshyn DJ (2013) Limb force and non-sagittal plane joint moments during maximum-effort curve sprint running in humans. J Exp Biol 215:4314–4321
Kuitunen S, Komi PV, Kyrolainen H (2002) Knee and ankle joint stiffness in sprint running. Med Sci Sport Exerc 34:166–173
Dorn TW, Schache AG, Pandy MG (2012) Muscular strategy shift in human running: dependence of running speed on hip and ankle muscle performance. J Exp Biol 215:1944–1956
Greene PR (1987) Sprinting with banked turns. J Biomech 20(7):667–680
Luo G, Stefanyshyn DJ (2012) Ankle moment generation and maximum-effort curved sprinting performance. J Biomech 45:2763–2768
Wannop JW, Graf ES, Stefanyshyn DJ (2014) The effect of lateral banking on the kinematics and kinetics of the lower extremity during lateral cutting movements. Hum Movement Sci 33:97–107
McMahon TA, Greene PR (1979) The influence of track compliance on running. J Biomech 12(12):893–904
Ferris DP, Louie M, Farley CT (1998) Running in the real world: adjusting leg stiffness for different surfaces. P Roy Soc Lond B Biol 265:989–994
Ferris DP, Liang K, Farley CT (1999) Runners adjust leg stiffness for their first step on a new running surface. J Biomech 32:787–794
Kerdok AE, Biewener AA, McMahon TA, Weyand PG, Herr HM (2002) Energetics and mechanics of human running on surfaces of different stiffnessess. J Appl Physiol 92:469–478
Hardin EC, van den Bogert AJ, Hamill J (2004) Kinematic adaptations during running: effects of footwear, surface and duration. Med Sci Sport Exerc 36:838–844
Morgan DW, Martin PE, Krahenbuhl GS (1989) Factors affecting running economy. Sports Med 7(5):310–330
Foster C, Luca A (2007) Running economy: the forgotten factor in elite performance. Sports Med 37(4–5):316–319
Saunders PU, Pyne DB, Telford RD, Hawley JA (2004) Reliability and variability of running economy in elite distance runners. Med Sci Sport Exerc 36(11):1972–1976
Busco C, Rusko H (1983) The effect of prolonged skeletal muscle stretch-shortening cycle on recoil of elastic energy and on energy expenditure. Acta Physiol Scand 119(3):219–224
Frederick EC, Howley ET, Powers SK (1986) Lower oxygen cost while running in soft soled shoes. Res Quart 57(174):177
Nigg BM, Stefanyshyn DJ, Cole G, Stergiou P, Miller J (2003) The effect of material characteristics of shoe soles on muscle activation and energy aspects during running. J Biomech 36(4):569–575
Roy JP, Stefanyshyn DJ (2006) Shoe midsole longitudinal bending stiffness and running economy, joint energy and EMG. Med Sci Sport Exerc 38(3):562–569
Stefanyshyn DJ, Fusco C (2003) Increase shoe bending stiffness increases sprint performance. Sport Biomech 3(1):55–66
Stefanyshyn DJ, Nigg BM (2000) Influence of midsole bending stiffness on joint energy and jump height performance. Med Sci Sport Exerc 32(2):471
Stefanyshyn DJ, Nigg BM (1997) Mechanical energy contribution of the metatarsophalangeal joint to running and sprinting. J Biomech 30:1081–1085
Toon D (2008) Design and analysis of sprint footwear to investigate the effects of longitudinal bending stiffness on sprinting performance. Dissertation. Loughborough University
Willwacher S, Konig M, Potthast W, Bruggemann G-P (2013) Does specific footwear facilitate energy storage and return at the metatarsophalangeal joint in running? J Appl Biomech 29:583–592
Willwacher S, Konig M, Braunstein B, Goldmann J-P, Bruggemann G-P (2014) The gearing function of running shoe longitudinal bending stiffness. Gait Posture 40:386–390
Baroud G, Stefanyshyn DJ, Bellchamber T (1999). Performance enhancements of hockey sticks using numerical simulation. In: Herzog W, Jihna A (ed) Proceedings of the XVIth congress of the international society of biomechanics, p 827
Pearsall DJ, Montgomery DL, Rothsching N, Turcotte RA (1999) The influence of stick stiffness on the performance of ice hockey slapshots. Sports Eng 2:2–11
Dabnichki P (1998) Biomechanical testing and sport equipment design. Sports Eng 1(2):93–105
Winfield D, Tan T (1996) Optimization of the clubface shape of a golf driver to minimize dispersion of off-center shots. Comput Struct 45(6):1217–1224
Worobets JT, Stefanyshyn DJ (2012) The influence of golf club shaft stiffness on clubhead kinematics at ball impact. Sport Biomech 11(2):239–248
Pelz D (1990) A simple, scientific, shaft test: steel versus graphite. In: Cochran AJ (ed) Science and golf. E & FN Spon, London, pp 264–269
Stanbridge K, Jones R, Mitchell S (2004) The effect of shaft flexibility on junior golfers’ performance. J Sports Sci 22(5):457–464
Knudson D (2008) Biomechanical aspects of the tennis racket. In: Hong Y, Bartlett R (ed) Handbook of biomechanics and human movement science, p 244
Kawazoe Y (2002) Mechanism of high-tech tennis rackets performance. Theor Appl Mech 51:177–187
Bahill A (2004) The ideal moment of inertia for a baseball or softball bat. IEEE Trans Syst Man Cybern A 34(2):197–204
Nigg BM, Stergiou P, Cole G, Stefanyshyn DJ, Mundermann A, Humble N (2003) Effect of shoe inserts on kinematics, center of pressure and leg joint moments during running. Med Sci Sports Exerc 35(2):314–319
Aubert X, Roquet ML, Van der Elst J (1951) The tension-length diagram of the frog’s sartorius muscle. Arch Physiol Biochem 59(2):239–241
Gordon AM, Huxley AF, Julian FJ (1966) The variation in isometric tension with sarcomere length in vertebrate muscle fibres. J Physiol 184(1):170–192
Hamley EY, Thomas V (1967) Physiological and postural factors in the calibration of the bicycle ergometer. J Physiol 191(2):55P–56P
Nordeen-Snyder KS (1976) The effect of bicycle seat height variation upon oxygen consumption and lower limb kinematics. Med Sci Sports Exerc 9(2):113–117
Savelberg HHCM, Van de Port IG, Willems PJ (2003) Body configuration in cycling affects muscle recruitment and movement pattern. J Appl Biomech 19(4):310–324
Fenn WO, Marsh BS (1935) Muscular force at different speeds of shortening. J Physiol 85(3):277–297
Hill AV (1938) The heat of shortening and the dynamic constants of muscle. Proc R Soc Lond B 126(843):136–195
Herzog W (2007) Muscle. In: Nigg BM, Herzog W (eds) Biomechanics of the musculo-skeletal system, 3rd edn. Wiley, Toronto, p 205
Yoshihuku Y, Herzog W (1990) Optimal design parameters of the bicycle-rider system for maximal muscle power output. J Biomech 23(10):1069–1079
Larkins C, Snabb TE (1999) Positive versus negative foot inclination for maximum height two-leg vertical jumps. Clin Biomech 14(5):321–328
Clarke TE, Frederick EC, Cooper LB (1983) Effects of shoe cushioning upon ground reaction forces in running. Int J Sports Med 4:247–251
Frederick EC, Clarke TE, Larsen JL, Cooper LB (1983) The effects of shoe cushioning on the oxygen demands of running. Biomechanical measurement of running shoe cushioning properties. In: Biomechanical aspects of sport shoes and playing surfaces. University of Calgary, Calgary, AB, pp 107–114
Kawakami Y, Kumagai K, Huijing PA, Hijikata T, Fukunaga T (2000) The length-force characteristics of human gastrocnemius and soleus muscles in vivo. In: Herzog W (ed) Skeletal muscle mechanics: from mechanisms to function. Wiley, Chichester, p 327
Maganaris CN (2003) Force-length characteristics of the in vivo human gastrocnemius muscle. Clin Anat 16(3):215–223
van Ingen Schenau GJ, Bakker K (1980) A biomechanical model of speed skating. J Hum Movement Stud 6(1):8
van Ingen Schenau GV, Bobbert MF, Rozendal RH (1987) The unique action of bi-articular muscles in complex movements. J Anat 155:1
Bobbert MF, van Ingen Schenau GJ (1988) Coordination in vertical jumping. J Biomech 21(3):249–262
de Koning JJ, Houdijk H, de Groot G, Bobbert MF (2000) From biomechanical theory to application in top sports: the klapskate story. J Biomech 33(10):1225–1229
Houdijk H, De Koning JJ, de Groot GERT, Bobbert MF, van Ingen SG (2000) Push-off mechanics in speed skating with conventional skates and klapskates. Med Sci Sports Exerc 32(3):635–641
Van Horne S, Stefanyshyn DJ (2005) Potential method of optimizing the klapskate hinge position in speed skating. J Appl Biomech 21(3):211–222
Carrier DR, Heglund NC, Earls KD (1994) Variable gearing during locomotion in the human musculoskeletal system. Science 265(5172):651–653
Scholz MN, Bobbert MF, Van Soest AJ, Clark JR, van Heerden J (2008) Running biomechanics: shorter heels, better economy. J Exp Biol 211(20):3266–3271
Mooses M, Mooses K, Haile DW, Durussel J, Kaasik P, Pitsiladis YP (2014) Dissociation between running economy and running performance in elite Kenyan distance runners. J Sports Sci 33(2):1–9
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Stefanyshyn, D.J., Wannop, J.W. Biomechanics research and sport equipment development. Sports Eng 18, 191–202 (2015). https://doi.org/10.1007/s12283-015-0183-5
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12283-015-0183-5