Skip to main content
Log in

Development and reliability quantification of a novel test set-up for measuring footwear bending stiffness

  • Original Article
  • Published:
Sports Engineering Aims and scope Submit manuscript

Abstract

Since footwear flexibility impacts functional design factors, numerous studies have investigated footwear bending stiffness. However, the various methods used to measure footwear bending stiffness have some limitations. Hence, the scope of this study was to develop and quantify the reliability of a novel test set-up for measuring footwear bending stiffness. A test set-up consisting of a hydraulic testing machine, a bending apparatus and a fixation unit was created that fulfilled the requirements specified in the initial phase of the study. The test set-up was evaluated by testing 15 different boots in three series of measurements. Bending stiffness of the boots ranged from 0.61 ± 0.03 to 2.38 ± 0.08 Nm/°. Two-way analysis of variance test yielded that the test set-up enabled the reliable measurement of footwear bending stiffness. Relative measurement uncertainty ranged from 1.3 to 6.1 %.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7

Similar content being viewed by others

References

  1. Nigg BM, Stefanyshyn DJ, Cole G, Boyer K (2005) Footwear research—past, present and future. In: Hamil J, Hardin E, Williams K (eds) Proceedings of the 7th Symposium on Footwear Biomechanics. ISB Technical Group on Footwear Biomechanics, Campus of Case, Cleveland, Ohio, USA. Case Western Reserve University Printing Services Cleveland, Cleveland

  2. Reinschmidt C, Nigg BM (2000) Current issues in the design of running and court shoes. Sportverletz Sportschaden 14(3):72–81. doi:10.1055/s-2000-7866

    Article  Google Scholar 

  3. Bojsen-Møller F (1982) Normale und pathologische Anatomie des Vorfusses. Orthopädie 11:148–153

    Google Scholar 

  4. Frederick EC (1987) Anforderungen an die Konstruktion von Laufschuhen. In: Segesser B, Pförringer W (eds) Der Schuh im Sport. Orthopädische und biomechanische Grundlagen zur Schuhversorgung des Sportlers. Fachbuch-Verlagsgesellschaft mbH, Erlangen, pp 31–39

    Google Scholar 

  5. Farkas R (1994) Der Test des Tests: Komplexe Analysen biomechanischer Laufschuhtests. Shaker, Aachen

    Google Scholar 

  6. Arndt A, Westbald P, Ekenman I, Lundberg A (2003) A comparison of external plantar loading and in vivo local metatarsal deformation wearing two different military boots. Gait Posture 18(2):20–26

    Article  Google Scholar 

  7. Cikajlo I, Matjačić Z (2007) The influence of boot stiffness on gait kinematics and kinetics during stance phase. Ergonomics 50(12):2171–2182

    Article  Google Scholar 

  8. Kleindienst FI, Michel KJ, Krabbe B (2005) Influence of midsole bending stiffness on the metatarsophalangeal joint based on kinematic and kinetic data during running. In: Hamil J, Hardin E, Williams K (eds) Proceedings of the 7th Symposium on Footwear Biomechanics. ISB Technical Group on Footwear Biomechanics, Campus of Case, Cleveland, Ohio, USA. Case Western Reserve University Printing Services Cleveland, Cleveland, pp 122–123

  9. Park C, Choi W, Lee J (2007) Effects of hardness and thickness of polyurethane foam midsoles on bending properties of the footwear. Fibers Polymers 8(2):192–197

    Article  Google Scholar 

  10. Shorten MR, Wright JC, Valiant G (1988) Effects of shoe flexibility on ground reaction forces and foot kinematics during fast walking. In: Groot G de, Hollander AP, van Ingen Schenua GJ (eds) Biomechanics. Proceedings of the 11th International Congress of Biomechanics. Human Kinetics, pp 710–714

  11. Böhm H, Hösl M (2010) Effect of boot shaft stiffness on stability joint energy and muscular co-contraction during walking on uneven surface. J Biomech 43(13):2467–2472. doi:10.1016/j.jbiomech.2010.05.029

    Article  Google Scholar 

  12. Requião LF, Nadeau S, Milot MH, Gravel D, Bourbonnais D, Gagnon D (2005) Quantification of level of effort at the plantarflexors and hip extensors and flexor muscles in healthy subjects walking at different cadences. J Electromyogr Kinesiol 15(4):393–405. doi:10.1016/j.jelekin.2004.12.004

    Article  Google Scholar 

  13. Stefanyshyn DJ, Nigg BM (2000) Influence of midsole bending stiffness on joint energy and jump height performance. Med Sci Sports Exerc 32(2):471–476

    Article  Google Scholar 

  14. Roy JR, Stefanyshyn DJ (2006) Shoe midsole longitudinal bending stiffness and running economy, joint energy, and EMG. Med Sci Sports Exerc 38(3):562–569. doi:10.1249/01.mss.0000193562.22001.e8

    Article  Google Scholar 

  15. Toon D, Vinet A, Pain MTG, Caine MP (2011) A methodology to investigate the relationship between lower-limb dynamics and shoe stiffness using custom-built footwear. Proc Inst Mech Eng P J Sports Eng Tech 225(1):32–37. doi:10.1177/1754337110396792

    Google Scholar 

  16. Cavanagh PR, Hinrichs RN, Williams KR (1980) Testing procedure for the 1981 Runner’s World Shoe Survey. Runner’s World 10:38–49

    Google Scholar 

  17. Nigg BM, Stefanyshyn DJ, Nigg SR (1996) Biomechanical and material testing of sport shoes: adidas America research and innovation report. Human Performance Laboratory, University of Calgary, Calgary

    Google Scholar 

  18. ASTM International (1994) Test method for flexibility of running shoes. ASTM International, West Conshohocken, PA(F0911-85). doi:10.1520/F0911-85R94

  19. Kleindienst FI (2003) Gradierung funktioneller Sportschuhparameter am Laufschuh in Bezug auf eine anthropometrische Differenzierung, geschlechtsspezifische Differenzierung und geographische Differenzierung. Shaker, Aachen

    Google Scholar 

  20. Jarboe NE, Quesada PM (2003) The effects of cycling shoe stiffness on forefoot pressure. Foot Ankle Int 24(10):784

    Google Scholar 

  21. Hillstrom H, Song J, Heilman B, Richards C (2005) A method for testing shoe torsional and toe break flexibilities. In: Hamil J, Hardin E, Williams K (eds) Proceedings of the 7th Symposium on Footwear Biomechanics. ISB Technical Group on Footwear Biomechanics, Campus of Case, Cleveland, Ohio, USA. Case Western Reserve University Printing Services Cleveland, Cleveland

  22. Oleson M, Adler D, Goldsmith P (2005) A comparison of forefoot stiffness in running and running shoe bending stiffness. J Biomech 38(9):1886–1894

    Article  Google Scholar 

  23. DIN Deutsches Institut für Normierung e.V. Fundamentals of metrology—part 3: evaluation of measurements of a single measure and measurement uncertainty, vol 17.020. Beuth Verlag, Berlin 17.020(DIN 1319-3: 1996-05)

Download references

Acknowledgments

The authors would like to thank Mr Steffen Weichold for granting us access to the data of the foot scans and Mr Justin Lange for realizing the biomechanical study. This study was funded by armasuisse (Federal Department of Defence, Civil Protection and Sport DDPS).

Conflict of interest

The authors declare that they have no conflicts of interest.

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Dominik Krumm.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Krumm, D., Schwanitz, S. & Odenwald, S. Development and reliability quantification of a novel test set-up for measuring footwear bending stiffness. Sports Eng 16, 13–19 (2013). https://doi.org/10.1007/s12283-012-0106-7

Download citation

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s12283-012-0106-7

Keywords

Navigation