Abstract
Three-dimensional (3D) nanostructured functional materials are important systems allowing new means for intricate control of electromagnetic properties. A key problem is realising a 3D printing methodology on the nanoscale that can yield a range of functional materials. In this article, it is shown that two-photon lithography, when combined with laser ablation of sacrificial layers, can be used to realise such a vision and produce 3D functional nanomaterials of complex geometry. Proof-of-principle is first shown by fabricating planar magnetic nanowires raised above the substrate that exhibit controlled domain wall injection and propagation. Secondly, 3D artificial spin-ice (3DASI) structures are fabricated, whose complex switching can be probed using optical magnetometry. We show that by careful analysis of the magneto-optical Kerr effect signal and by comparison with micromagnetic simulations, depth dependent switching information can be obtained from the 3DASI lattice. The work paves the way for new materials, which exploit additional physics provided by non-trivial 3D geometries.
![](http://media.springernature.com/lw685/springer-static/image/art%3A10.1007%2Fs12274-022-4649-z/MediaObjects/12274_2022_4649_Fig1_HTML.jpg)
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Skylar-Scott, M. A.; Mueller, J.; Visser, C. W.; Lewis, J. A. Voxelated soft matter via multimaterial multinozzle 3D printing. Nature 2019, 575, 330–335.
Elder, B.; Neupane, R.; Tokita, E.; Ghosh, U.; Hales, S.; Kong, Y. L. Nanomaterial patterning in 3D printing. Adv. Mater. 2020, 32, 1907142.
Bauer, J.; Schroer, A.; Schwaiger, R.; Kraft, O. Approaching theoretical strength in glassy carbon nanolattices. Nat. Mater. 2016, 15, 438–443.
Gernhardt, M.; Blasco, E.; Hippler, M.; Blinco, J.; Bastmeyer, M.; Wegener, M.; Frisch, H.; Barner-Kowollik, C. Tailoring the mechanical properties of 3D microstructures using visible light post-manufacturing. Adv. Mater. 2019, 31, 1901269.
Kadic, M.; Milton, G. W.; Van Hecke, M.; Wegener, M. 3D metamaterials. Nat. Rev. Phys. 2019, 1, 198–210.
May, A.; Hunt, M.; Van Den Berg, A.; Hejazi, A.; Ladak, S. Realisation of a frustrated 3D magnetic nanowire lattice. Commun. Phys. 2019, 2, 13.
Kern, C.; Kadic, M.; Wegener, M. Experimental evidence for sign reversal of the hall coefficient in three-dimensional metamaterials. Phys. Rev. Lett. 2017, 118, 016601.
Cao, Y. Y.; Takeyasu, N.; Tanaka, T.; Duan, X. M.; Kawata, S. 3D metallic nanostructure fabrication by surfactant-assisted multiphoton-induced reduction. Small 2009, 5, 1144–1148.
Bernardeschi, I.; Ilyas, M.; Beccai, L. A review on active 3D microstructures via direct laser lithography. Adv. Intell. Syst. 2021, 3, 2100051.
Hunt, M.; Taverne, M.; Askey, J.; May, A.; Van Den Berg, A.; Ho, Y. L. D.; Rarity, J.; Ladak, S. Harnessing multi-photon absorption to produce three-dimensional magnetic structures at the nanoscale. Materials 2020, 13, 761.
Harinarayana, V.; Shin, Y. C. Two-photon lithography for three-dimensional fabrication in micro/nanoscale regime: A comprehensive review. Opt. Laser Technol. 2021, 142, 107180.
Puce, S.; Sciurti, E.; Rizzi, F.; Spagnolo, B.; Qualtieri, A.; De Vittorio, M.; Staufer, U. 3D-microfabrication by two-photon polymerization of an integrated sacrificial stencil mask. Micro Nano Eng. 2019, 2, 70–75.
Liao, P.; Xing, L. X.; Zhang, S. W.; Sun, D. Magnetically driven undulatory microswimmers integrating multiple rigid segments. Small 2019, 15, 1901197.
Fernández-Pacheco, A.; Streubel, R.; Fruchart, O.; Hertel, R.; Fischer, P.; Cowburn, R. P. Three-dimensional nanomagnetism. Nat. Commun. 2017, 8, 15756.
Askey, J.; Hunt, M. O.; Langbein, W.; Ladak, S. Use of two-photon lithography with a negative resist and processing to realise cylindrical magnetic nanowires. Nanomaterials 2020, 10, 429.
Sahoo, S.; Mondal, S.; Williams, G.; May, A.; Ladak, S.; Barman, A. Ultrafast magnetization dynamics in a nanoscale three-dimensional cobalt tetrapod structure. Nanoscale 2018, 10, 9981–9986.
Williams, G.; Hunt, M.; Boehm, B.; May, A.; Taverne, M.; Ho, D.; Giblin, S.; Read, D.; Rarity, J.; Allenspach, R. et al. Two-photon lithography for 3D magnetic nanostructure fabrication. Nano Res. 2018, 11, 845–854.
Parkin, S. S. P.; Hayashi, M.; Thomas, L. Magnetic domain-wall racetrack memory. Science 2008, 320, 190–194.
Parkin, S.; Yang, S. H. Memory on the racetrack. Nat. Nanotechnol. 2015, 10, 195–198.
Sanz-Hernández, D.; Hamans, R. F.; Liao, J. W.; Welbourne, A.; Lavrijsen, R.; Fernández-Pacheco, A. Fabrication, detection, and operation of a three-dimensional nanomagnetic conduit. ACS Nano 2017, 11, 11066–11073.
Linder, V.; Gates, B. D.; Ryan, D.; Parviz, B. A.; Whitesides, G. M. Water-soluble sacrificial layers for surface micromachining. Small 2005, 1, 730–736.
Kumagai, H.; Midorikawa, K.; Toyoda, K.; Nakamura, S.; Okamoto, T.; Obara, M. Ablation of polymer films by a femtosecond high-peak-power Ti: sapphire laser at 798 nm. Appl. Phys. Lett. 1994, 65, 1850–1852.
Rethfeld, B.; Ivanov, D. S.; Garcia, M. E.; Anisimov, S. I. Modelling ultrafast laser ablation. J. Phys. D:Appl. Phys. 2017, 50, 193001.
May, A.; Saccone, M.; Van Den Berg, A.; Askey, J.; Hunt, M.; Ladak, S. Magnetic charge propagation upon a 3D artificial spin-ice. Nat. Commun. 2021, 12, 3217.
Sahoo, S.; May, A.; Van Den Berg, A.; Mondal, A. K.; Ladak, S.; Barman, A. Observation of coherent spin waves in a three-dimensional artificial spin ice structure. Nano Lett. 2021, 21, 4629–4635.
Allwood, D. A.; Xiong, G.; Cooke, M. D.; Cowburn, R. P. Magneto-optical kerr effect analysis of magnetic nanostructures. J. Phys. D:Appl. Phys. 2003, 36, 2175–2182.
Ladak, S.; Read, D. E.; Perkins, G. K.; Cohen, L. F.; Branford, W. R. Direct observation of magnetic monopole defects in an artificial spin-ice system. Nat. Phys. 2010, 6, 359–363.
Kondorsky, E. On hysteresis in ferromagnetics. J. Phys. 1940, 2, 161–181.
Fernández-Pacheco, A.; Serrano-Ramón, L.; Michalik, J. M.; Ibarra, M. R.; De Teresa, J. M.; O’Brien, L.; Petit, D.; Lee, J.; Cowburn, R. P. Three dimensional magnetic nanowires grown by focused electron-beam induced deposition. Scientific Reports 2013, 3, 1492.
Fischbacher, T.; Franchin, M.; Bordignon, G.; Fangohr, H. A systematic approach to multiphysics extensions of finite-element-based micromagnetic simulations: Nmag. IEEE Trans. Magn. 2007, 43, 2896–2898.
Acknowledgements
S. L. acknowledges funding from the Engineering and Physics Research Council (EP/R009147/1) and from the Leverhulme Trust (RPG-2021-139). The data that support the findings of this research can be found in the Cardiff University data repository at https://doi.org/10.17035/d.2022.0199664747.
Author information
Authors and Affiliations
Corresponding author
Electronic Supplementary Material
12274_2022_4649_MOESM1_ESM.pdf
Combining two-photon lithography with laser ablation of sacrificial layers: A route to isolated 3D magnetic nanostructures
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made.
The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder.
To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
van den Berg, A., Caruel, M., Hunt, M. et al. Combining two-photon lithography with laser ablation of sacrificial layers: A route to isolated 3D magnetic nanostructures. Nano Res. 16, 1441–1447 (2023). https://doi.org/10.1007/s12274-022-4649-z
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12274-022-4649-z