Abstract
3D printing as a tool for prototyping is already well established in many areas of biotechnology. Whether for the production of individual laboratory devices, for the development of biocompatible devices for cell cultivation or even lab-on-a-chip systems for miniaturization and reduction of consumables – the technology is now used by many research areas within biotechnology. However, there is one area where 3D printing is still comparatively underutilized: chromatography. Here, we explain the potential and possible applications of 3D printing for the development of miniaturized chromatography systems.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
Literatur
Silva TC, Eppink M, Ottens M (2022) Automation and miniaturization: enabling tools for fast, high throughput process development in integrated continuous biomanufacturing. J Chem Tech Biotech 97: 2365–2375
Habib T, Brämer C, Heuer C et al. (2022) 3D-Printed microfluidic device for protein purification in batch chromatography. Lab on a chip 22: 986–993
Heuer C, Preuß JA, Habib T et al. (2022) 3D printing in biotechnology-An insight into miniaturized and microfluidic systems for applications from cell culture to bioanalytics. Eng Life Sci 22: 744–759
Lücking TH, Sambale F, Schnaars B et al. (2015) 3D-printed individual labware in biosciences by rapid prototyping: In vitro biocompatibility and applications for eukaryotic cell cultures. Eng Life Sci 15: 57–64
Heuer C, Preuss JA, Buttkewitz M et al. (2022) A 3D-printed microfluidic gradient generator with integrated photonic silicon sensors for rapid antimicrobial susceptibility testing. Lab on a chip 22: 4950–4961
Siller IG, Preuss JA, Urmann K et al. (2020) 3D-Printed Flow Cells for Aptamer-Based Impedimetric Detection of E. coli Crooks Strain. Sensors (Basel) 20: 4421
Enders A, Preuss JA, Bahnemann J (2021) 3D Printed Microfluidic Spiral Separation Device for Continuous, Pulsation-Free and Controllable CHO Cell Retention. Micromachines (Basel) 12: 1060
Frey LJ, Vorländer D, Ostsieker H et al. (2021) 3D-printed micro bubble column reactor with integrated microsensors for biotechnological applications: From design to evaluation. Sci Rep 11: 7276
Arshavsky-Graham S, Enders A, Ackerman S et al. (2021) 3D-printed microfluidics integrated with optical nanostructured porous aptasensors for protein detection. Mikrochimica Acta 188: 67
Salmean C, Dimartino S (2019) 3D-Printed Stationary Phases with Ordered Morphology: State of the Art and Future Development in Liquid Chromatography. Chromatographia 82: 443–463
Enders A, Siller IG, Urmann K et al. (2019) 3D Printed Microfluidic Mixers-A Comparative Study on Mixing Unit Performances. Small 15: e1804326
Wohlenberg OJ, Kortmann C, Meyer KV et al. (2022) Optimization of a mAb production process with regard to robustness and product quality using quality by design principles. Eng Life Sci 22: 484–494
Funding
Open Access funding enabled and organized by Projekt DEAL.
Author information
Authors and Affiliations
Corresponding author
Additional information
Der Lehrstuhl „Technische Biologie“ am Institut für Physik der Universität Augsburg unter der Leitung von Prof. Dr. Janina Bahnemann beschäftigt sich mit der Herstellung und Integration von 3D-gedruckten mikrofluidischen Systemen und der Entwicklung innovativer Biosensoren, die für Anwendungen im Bereich der Zellkulturtechnik und Point-of-Care-Diagnostik zum Einsatz kommen.
Die Schwerpunkte der Arbeitsgruppe von Dr. Dörte Solle am Institut für Technische Chemie der Leibniz Universität Hannover liegen in der Entwicklung von Process Analytical Tools (PAT) und Sensoren zur Überwachung von Bioprozessen sowie der Produktcharakterisierung. Der Prozess umfasst die gesamte Kette zur Herstellung monoklonaler Antikörper aus tierischen Zellkultivierungen, aufgeteilt in Up- und Downstream-Prozesse.
Rights and permissions
Dieser Artikel wird unter der Creative Commons Namensnennung 4.0 International Lizenz veröffentlicht, welche die Nutzung, Vervielfältigung, Bearbeitung, Verbreitung und Wiedergabe in jeglichem Medium und Format erlaubt, sofern Sie den/die ursprünglichen Autor(en) und die Quelle ordnungsgemäß nennen, einen Link zur Creative Commons Lizenz beifügen und angeben, ob Änderungen vorgenommen wurden. Die in diesem Artikel enthaltenen Bilder und sonstiges Drittmaterial unterliegen ebenfalls der genannten Creative Commons Lizenz, sofern sich aus der Abbildungslegende nichts anderes ergibt. Sofern das betreffende Material nicht unter der genannten Creative Commons Lizenz steht und die betreffende Handlung nicht nach gesetzlichen Vorschriften erlaubt ist, ist für die oben aufgeführten Weiterverwendungen des Materials die Einwilligung des jeweiligen Rechteinhabers einzuholen. Weitere Details zur Lizenz entnehmen Sie bitte der Lizenzinformation auf http://creativecommons.org/licenses/by/4.0/deed.de.
About this article
Cite this article
Kortmann, C., Habib, T., Solle, D. et al. 3D-Druck zur Miniaturisierung von chromatographischen Anwendungen. Biospektrum 29, 276–277 (2023). https://doi.org/10.1007/s12268-023-1935-6
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12268-023-1935-6