Abstract
With the continuous development of flexible wearable technology, there is an increasing demand for new sensors that can accurately monitor and record human motion. Fiber mats have emerged as a promising material for use in flexible sensors. In this study, a fibrous mat consisting of carbonized polyacrylonitrile/keratin was designed for monitoring human motions using electrostatic spinning, high temperature pre-oxidation, and carbonization processes. The fiber mat exhibits excellent mechanical strength and flexibility. By measuring changes in the sensor resistance of the carbonized polyacrylonitrile/keratin fiber mat, it is possible to monitors the flatness and curvature of the finger with high precision, offering a new solution for the development of flexible wearable products. The carbonized polyacrylonitrile/keratin-based fiber mat has the advantages of flexibility, fast response, and high accuracy, and is a novel and promising sensing material with broad application prospects in the field of wearable technology.
Similar content being viewed by others
Data Availability Statement
The data supporting the results of this study are presented in their entirety in the manuscript. These data are available from the authors upon reasonable request.
References
M. Gong, L. Zhang, P. Wan, Prog. Polym. Sci. 107, 101279 (2020)
B. Wang, J. Wang, Y. Lou, S. Ding, X. Jin, F. Liu, Z. Xu, J. Ma, Z. Sun, X. Li, Appl. Clay Sci. 228, 106650 (2022)
M. Ahsan, M.N. Tasnim, J. Haider, M. Shahjalal, S. Hashmi, Materials for developing future flexible electronic device, in Encyclopedia of materials: electronics. ed. by A.S.M.A. Haseeb (Academic Press, Oxford, 2023), p.517
D. Li, W.-Y. Lai, Y.-Z. Zhang, W. Huang, Adv. Mater. (2018). https://doi.org/10.1002/adma.201704738
J. Li, P. Yang, X. Li, C. Jiang, J. Yun, W. Yan, K. Liu, H.J. Fan, S.W. Lee, Acs Energy Lett. (2022). https://doi.org/10.1021/acsenergylett.2c02029
B. Feng, T. Sun, W. Wang, Y. Xiao, J. Huo, Z. Deng, G. Bian, Y. Wu, G. Zou, W. Wang, T. Ren, L. Liu, Adv. Mater. (2023). https://doi.org/10.1002/adma.202208568
S.A. Graham, H. Patnam, P. Manchi, M.V. Paranjape, A. Kurakula, J.S. Yu, Nano Energy (2022). https://doi.org/10.1016/j.nanoen.2022.107455
E. Gibertini, F. Lissandrello, L. Bertoli, P. Viviani, L. Magagnin, Coatings (2023). https://doi.org/10.3390/coatings13020230
H. Zhang, F.Y. Sun, G. Cao, D.Y. Zhou, G.F. Zhang, J.Y. Feng, S. Wang, F.Y. Su, Y.Q. Tian, Y.J. Liu, Y.H. Tian, Int. J. Extrem. Manuf. (2023). https://doi.org/10.1088/2631-7990/aca638
H.X. Liu, L. Wang, G.M. Lin, Y.H. Feng, Biomater. Sci. 10(3), 614 (2022)
G.B. Lou, Y.T. Wu, X.Q. Zhu, Y.Z. Lu, S. Yu, C.H. Yang, H. Chen, C. Guan, L. Li, Z.H. Shen, ACS Appl. Mater. Interfaces. 10(49), 42503 (2018)
H. Wang, S. Li, H. Lu, M. Zhu, H. Liang, X. Wu, Y. Zhang, Small Methods. (2023). https://doi.org/10.1002/smtd.202201340
H. Zheng, X. Han, Q. Wei, X. Liu, Y. Li, J. Zhou, J. Mater. Chem. B. 10(41), 8450 (2022)
C. Kim, B.T.N. Ngoc, K.S. Yang, M. Kojima, Y.A. Kim, Y.J. Kim, M. Endo, S.C. Yang, Adv. Mater. 19(17), 2341–2346 (2007)
H.-M. Lee, H.-G. Kim, S.-J. Kang, S.-J. Park, K.-H. An, B.-J. Kim, J. Ind. Eng. Chem. 21, 736 (2015)
D. Jang, M.E. Lee, J. Choi, S.Y. Cho, S. Lee, Carbon 186, 644 (2022)
A. Moayeri, A. Ajji, J. Nanosci. Nanotechnol. 17(3), 1820 (2017)
S. H. Zhu, Q. F. Zhou, J. Yi, Y. H. Xu, C. Y. Fan, C. X. Lin, J. Y. Wu, Y. H. Lin, Adv. Sci. 10(11), e2207400 (2023)
M. Natali, A. Campana, T. Posati, E. Benvenuti, F. Prescimone, D.O.S. Ramirez, A. Varesano, C. Vineis, R. Zamboni, M. Muccini, A. Aluigi, S. Toffanin, Biosens. Bioelectron. (2019). https://doi.org/10.1016/j.bios.2019.111480
H. Ziyadi, M. Baghali, M. Bagherianfar, F. Mehrali, R. Faridi-Majidi, Adv. Compos. Hybrid Mater. 4(3), 768 (2021)
X. Yu, Z. Wu, L. Weng, D. Jiang, H. Algadi, Z. Qin, Z. Guo, B.B. Xu, Adv. Mater. Interfaces. (2023). https://doi.org/10.1002/admi.202202292
Acknowledgements
This project was funded by the National Natural Science Foundation of China (Grant No. 11702169), the Scientific Research Staring Foundation of Shanghai University of Engineering Science (Grant No. 2017-19), Class III Peak Discipline of Shanghai-Materials Science and Engineering (High-Energy Beam Intelligent Processing and Green Manufacturing) and the Talents Action Program of Shanghai University of Engineering Science (Grant No. 2017RC522017).
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of Interest
The authors certify that none of their known financial conflicts of interest or close personal ties might have appeared to have influenced the research presented in this study.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Hou, C., Yu, J. & Xin, B. Preparation and Characterization of Carbonized Polyacrylonitrile/Keratin Nanofiber Mat. Fibers Polym 24, 3833–3838 (2023). https://doi.org/10.1007/s12221-023-00354-x
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12221-023-00354-x