Abstract
This research aims to investigate the coincident optimization of both properties of specific volume and tensile strength of high-bulked cotton/acrylic rotor yarn, using Taguchi statistical procedure. Therefore, the L27 orthogonal arrays were used to design production process factors of high-bulked yarns such as percentage of acrylic shrinkable fiber, navel type, rotor speed, yarn twist, and relaxation temperature. The used method offers techniques such as signal-to-noise (S/N) and overall evaluation criteria (OEC) which can be respectively employed for individual and coincident optimization of two studied characteristics. Considering the meaningful effects of the variance values for all factors, they have significant effects on the yarn specific volume. It was also deduced that except navel type and rotor speed, the influence of the other studied factors on the yarn tensile strength is significant. Moreover, in the coincident optimization, it was shown that the yarn twist has the most significant level on OEC values.
Similar content being viewed by others
Data availability
The data provided is not available as an appendix.
References
S.M. Ishtiaque, B.K. Behera, Synth. Fiber. 2, 20 (1991)
V.B. Gupta, V.K. Kothari, Manufactured Fiber Technology (Chapman and Hall, London, 1997)
B. Piller, Bulked Yarns (SNTL-Publishers of Technical Literature, Prague, 1973)
A. Das, V.K. Kothari, M. Balaji, J. Text. Inst. 98, 261 (2007)
A. Das, V.K. Kothari, M. Balaji, J. Text. Inst. 98, 363 (2007)
A. Das, R.D. Mal, J. Text. Inst. 100, 44 (2009)
A. Das, S.S. Yadaw, J. Text. Inst. 104, 322 (2013)
M. Sadeghi-Sadeghabad, M. Tavakoli, A. Alamdar-Yazdi, H. Mashroteh, J. Text. Inst. 106, 1328 (2015)
P.R. Lord, Text. Res. J. 41, 778 (1971)
E. Kaplan, E. Koc, Fibres Text. East. Eur. 2, 7 (2010)
J.S. Manohar, A.K. Rakshit, N. Balasubramanian, Text. Res. J. 53, 497 (1983)
S. Palamutcu, H. Kadoğlu, Fibres Text. East. Eur. 16, 24 (2008)
J. Antony, Design of Experiments for Engineers and Scientists (Butterworth-Heinemann, Boston, MA, 2003)
N. Ahmad, S. Kamal, Z.A. Raza, S. Abid, M. Zeshan, Fiber. Polym. 20, 1039 (2020)
M.S. Irfan, R. Umer, S. Rao, Fiber. Polym. 22, 1378 (2021)
H.A.D. Ashtiani, R.E. Farsani, Fiber. Polym. 12, 1054 (2011)
M.-L. Huang, Y.-H. Hung, W.-C. Kuo, Fiber. Polym. 16, 2670 (2015)
J. Simpson, M.F. Murray, Text. Res. J. 48, 270 (1978)
J.W.S. Hearle, P.R. Lord, N. Senturk, J. Text. Inst. 63, 605 (1972)
C.F.J. Kuo, C.C. Huang, T.-L. Su, W.L. Lan, M.-Y. Lin, Fiber. Polym. 15, 2597 (2014)
G.G. Pino, A.C. Kieling, A. Bezazi, H. Boumediri, J.F.R. Souza, F.V. Díaz, J.L.V. Rivera, J. Dehaini, T.H. Panzera, Fiber. Polym. 21, 399 (2020)
D. Das, R. Thakur, Fiber. Polym. 2013, 482 (2013)
Y. Erbil, O. Babaarslan, P.D. Baykal, Fibres Text. East. Eur. 16, 31 (2018)
R.T. Esfahani, M. Shanbeh, Fibres Text. East. Eur. 22, 61 (2014)
C.-I. Su, Y.-S. Liu, C.-H. Hsu, J.-Y. Lee, C.-H. Lu, Fiber. Polym. 16, 826 (2015)
C.-F.J. Kuo, T.-L. Su, Fiber. Polym. 7, 404 (2006)
D. Xing, X.Y. Xi, M.G. Qi, Q.B. Zheng, P.C. Ma, J. Text. Inst. 112, 515 (2021)
C.-F.J. Kuo, C.-C. Fang, Fiber. Polym. 7, 344 (2006)
M. Pourmehr, A.H. Navarchian, J. Appl. Polym. Sci. 111, 338 (2009)
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of Interest
There is no potential conflict of interest.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Ahadi, M.M., Mashroteh, H., Owlia, E. et al. High-Bulking Behavior of Cotton/Acrylic Rotor Yarn Using Taguchi Statistical Procedure. Fibers Polym 24, 2529–2539 (2023). https://doi.org/10.1007/s12221-023-00242-4
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12221-023-00242-4