Abstract
This paper is intended to determine the optimal processing parameters applied to the dyeing procedure so that the desired color strength of a raw fabric can be achieved. Moreover, the processing parameters are also used for constructing a system to predict the fabric quality. The fabric selected is the nylon and Lycra blend. The dyestuff used for dyeing is acid dyestuff and the dyeing method is one-bath-two-section. The Taguchi quality method is applied for parameter design. The analysis of variance (ANOVA) is applied to arrange the optimal condition, significant factors and the percentage contributions. In the experiment, according to the target value, a confirmation experiment is conducted to evaluate the reliability. Furthermore, the genetic algorithm (GA) is combined with the back propagation neural network (BPNN) in order to establish the forecasting system for searching the best connecting weights of BPNN. It can be shown that this combination not only enhances the efficiency of the learning algorithm, but also decreases the dependency of the initial condition during the network training. Most of all, the robustness of the learning algorithm will be increased and the quality characteristic of fabric will be precisely predicted.
Similar content being viewed by others
References
X. Wang and M. Bide,Textile Chemist and Colorist,30(4), 45 (1998).
N. A. Ibrahim, M. A. Youssef, M. H. Helal, and M. F. Shaaban,J. Appl. Polym. Sci.,89(13), 3563 (2003).
M. I. Jahmeerbacus, N. Kistamah, and R. B. Ramgulam,Color. Technol.,120(2), 51 (2004).
E. Tsatsaroni and M. Liakopoulou-Kyriakides,Dyes Pigment.,29(3), 203 (1995).
D. Cristea and G. Vilarem,Dyes Pigment.,70(3), 238 (2006).
B. David and C. G. Victor,J. Soc. of Dyers Colour.,196, 237 (1980).
K. W. Hench and A. Al-Ghanim,Proceedings of the Artificial Neural Networks in Engineering U.S.A.,5, 873 (1995).
J. F. C. Khaw, B. S. Lim, and L. E. N. Lennie,Neurocomputing,7(3), 225 (1995).
S. S. Madaeni and S. Koocheki,Chem. Eng. J.,119(1), 37 (2006).
K. D. Kim, D. N. Han, and H. T. Kim,Chem. Eng. J.,104(1–3), 55 (2004).
J. M. Liu, P. Y. Lu, and W. K. Weng,Mater. Sci. Eng. B-Solid State Mater. Adv. Technol.,85(2–3), 209 (2001).
A. J. Greaves,Dyes Pigment.,46(2), 101 (2000).
X. Zhang, S. Zhang, and X. He,J. Cryst. Growth,264(1–3), 409 (2004).
I. Tasadduq, S. Rehman, and K. Bubshait,Renew. Energy,25(4), 545 (2002).
A. A. Brice and W. R. Johns,Comput. Chem. Eng.,22(1–2), 47 (1998).
D. Sarkar and J. M. Modak,Chem. Eng. Sci.,58(11), 2283 (2003).
T. S. Gruca and B. R. Klemz,Eur. J. Oper. Res.,146(3), 621 (2003).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Kuo, CF.J., Fang, CC. Optimization of the processing conditions and prediction of the quality for dyeing nylon and lycra blended fabrics. Fibers Polym 7, 344–351 (2006). https://doi.org/10.1007/BF02875765
Received:
Revised:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF02875765