Abstract
Breathable waterproof performance fabrics have been developed to protect the human body from external moisture, and it is used in various forms. So, there are various test methods for evaluating these, and those are utilized for quality control. However, the test method for evaluating the functionality of slide fasteners is extremely limited in reality beside physical characteristics. In the reason, it is true that the assurance of functionality cannot be guaranteed in terms of finished products. Especially in military goods, the penetration of a small amount of moisture or water through sub-materials in extreme cold conditions has also caused fatal consequences. So it has become an urgent task of developing evaluation method in order to prevent these situations. In this research, we investigated the waterproof evaluation method used in the past and wanted to develop an appropriate test method so that these can be applied to slide fasteners. Therefore, by investigating the test method through preparation of samples, use of protective jigs, it was possible to develop a discriminating test method. Finally, it was expected that it could contribute to the improvement of product quality by applying to future munitions related standards.
Similar content being viewed by others
References
Y. J. Lee and S. J. Park, J. Korean Soc. Costume, 63, 68 (2013).
R. J. Raj Kumar and Dr. V. Krishnaveni, J. Adv. Res. Dynamical & Control Systems, Special, 144 (2017).
Y. S. Choi and J. H. Jung, HCI 2007, 2, 256 (2007).
L. Weiner, Scientific American, 248, 122 (1983).
J. A. Joo and O. S. Cha, J. Korean Soc. Clothing and Textiles, 9, 93 (1985).
http://www.ykkfastening.com (Accessed June 1, 2018).
S. Umaru, M. U. Kaisan, S. Usman, and A. Giwa, Nigerian J. Mater. Sci. Eng., 7, 81 (2017).
BS 3084, Slide Fasteners(Zips)-Specification, BSI, British Standards, 2006.
JIS S 3015, Slide Fasteners, Japanese Standards Association, 2007.
KS G 3102, Slide Fasteners, Korean Agency for Technology and Standard, 2009.
ASTM D 2060-00, Test Methods for Measuring Zippers Dimensions, ASTM International, 2014.
ASTM D 2061-07, Standard Test Methods for Strength Tests for Zippers, ASTM International, 2013.
KS K ISO 811, Textile Fabrics-Determination of Resistance to Water Penetration-Hydrostatic Pressure Test, Korean Agency for Technology and Standard, 2015.
AATCC Technical Manual 2011, AATCC TM 35, Water Resistance: Rain Test, American Association of Textile Chemists and Colorists, 2006.
AATCC Technical Manual 2011, AATCC TM 42, Water Resistance: Impact Penetration Test, American Association of Textile Chemists and Colorists, 2007.
ISO 9865, Textiles-Determination of Resistance to Water Penetration-impact Penetration Test, International Organization for Standardization, 2007.
KS K 0029, Stitch Types-Classification and Terminology, Korean Agency for Technology and Standard, 2015.
KS K 0030, Seam Types-Classification and Terminology, Korean Agency for Technology and Standard, 2010.
ASTM D 7017-14, Standard Performance Specification for Rainwear and All-Purpose, Water-Repellent Coat Fabrics, ASTM International, West Conshohocken, PA, 2014.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Lee, M., Hong, S. & Lee, S. A Study on Test Method for Water Resistance of Slide Fasteners. Fibers Polym 20, 1085–1091 (2019). https://doi.org/10.1007/s12221-019-8500-4
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12221-019-8500-4