Skip to main content
SpringerLink
Log in

Improving the dyeability of poly(lactic acid) fiber using N-Phenylaminopropyl POSS nanoparticle during melt spinning

  • Published:
Fibers and Polymers Aims and scope Submit manuscript

Abstract

The dyeability of poly(lactic acid) (PLA) fiber strongly depends on disperse dye structure due to the low dyeing temperature and the short dyeing time. Thus, the dye uptake value of PLA fiber is low for some disperse dyes and is needed to be improved. In the current study, the dyeability of PLA fiber is improved with the addition of N-Phenylaminopropyl polyhedral oligomeric silsesquioxane (AP-POSS) during melt spinning process. The effects of dyeing conditions including dyeing temperature and time, disperse dye type and AP-POSS concentrations are investigated on the dyeability properties of PLA fiber samples. The tensile, thermal and morphological properties of fiber samples are also characterized by tensile testing, differential scanning calorimeter (DSC), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). As the added amount of AP-POSS increases, the percent crystallinity increases and the tensile strength reduces. According to the dyeing results, AP-POSS is very effective for increasing the dyeability of PLA fiber especially for disperse dyes with low dye uptake values.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  1. K. E. Perepelkin, Fibre Chem., 34, 85 (2002).

    Article  CAS  Google Scholar 

  2. O. Avinc and A. Khoddami, Fibre Chem., 42, 68 (2010).

    Article  CAS  Google Scholar 

  3. J. Lunt and A. L. Shafer, J. Ind. Text., 29, 191 (2000).

    Article  CAS  Google Scholar 

  4. S. M. Burkinshaw, “Chemical Principle of Synthetic Fibre Dyeing”, pp.1–70, Chapman & Hall, London, 1995.

    Book  Google Scholar 

  5. J. Lunt and J. Bone, AATCC Rev., 1, 20 (2001).

    CAS  Google Scholar 

  6. L. E. Scheyer and A. Chiweshe, AATCC Rev., 1, 44 (2001).

    CAS  Google Scholar 

  7. Y. Yang and S. Huda, J. Appl. Polym. Sci., 90, 3285 (2003).

    Article  CAS  Google Scholar 

  8. J. Choi and W. Seo, Fiber. Polym., 7, 270 (2006).

    Article  CAS  Google Scholar 

  9. D. Philips, J. Suesat, M. Wilding, D. Farrington, S. Sandukas, D. Sawyer, J. Bone, and S. Dervan, Color. Technol., 120, 35 (2004).

    Article  Google Scholar 

  10. Y. Yang and S. Huda, AATCC Rev., 3, 56 (2003).

    CAS  Google Scholar 

  11. M. B. Bilal, P. Viallier Raynard, B. Haidar, G. Colombe, and A. Lallam, Text. Res. J., 81, 838 (2011).

    Article  CAS  Google Scholar 

  12. D. Karst and Y. Yang, J. Appl. Polym. Sci., 96, 416 (2005).

    Article  CAS  Google Scholar 

  13. D. Karst, D. Nama, and Y. Yang, J. Colloid. Interface Sci., 310, 106 (2007).

    Article  CAS  Google Scholar 

  14. L. He, S. Zhang, and B. Tang, Chin. J. Chem. Eng., 17, 156 (2009).

    Article  CAS  Google Scholar 

  15. L. He, S. Zhang, and B. Tang, Chin. Chem. Lett., 18, 1151 (2007).

    Article  CAS  Google Scholar 

  16. H. Wen and J. J. Dai, J. Appl. Polym. Sci., 105, 1903 (2007).

    Article  CAS  Google Scholar 

  17. S. M. Burkinshaw and D. S. Jeong, Dyes Pigment., 92, 1025 (2012).

    Article  CAS  Google Scholar 

  18. S. M. Burkinshaw and D. S. Jeong, Dyes Pigment., 92, 988 (2012).

    Article  CAS  Google Scholar 

  19. N. Rabiei, M. H. Kish, S. H. Amirshahi, and M. Radjabian, Dyes Pigment., 94, 386 (2012).

    Article  CAS  Google Scholar 

  20. M. Ataeefard and S. Moradian, J. Appl. Polym. Sci., 125, 214 (2012).

    Article  Google Scholar 

  21. L. Toshiwal, Q. Fan, and S. C. Ugbolue, J. Appl. Polym. Sci., 106, 706 (2007).

    Article  Google Scholar 

  22. M. P. Gashti and S. Moradian, J. Appl. Polym. Sci., 125, 4109 (2012).

    Article  Google Scholar 

  23. I. Ozen and S. Gunes, Polym. Eng. Sci., 53, 1031 (2013).

    Article  CAS  Google Scholar 

  24. H. Yan and Y. Chen, Iran. Polym. J., 19, 791 (2010).

    CAS  Google Scholar 

  25. C. Yu, M. Zhu, X. Shong, and Y. Chen, J. Appl. Polym. Sci., 82, 3172 (2001).

    Article  CAS  Google Scholar 

  26. A. Davulcu and M. Dogan, Fiber. Polym., 15, 2370 (2014).

    Article  CAS  Google Scholar 

  27. H. Sirin, B. Tuna, and G. Ozkoc, Adv. Polym. Tech., 33, 21458 (2014).

    Article  Google Scholar 

  28. K. Paakinaho, V. Ella, S. Syrjala, and M. Kellomaki, Polym. Degrad. Stabil., 94, 438 (2009).

    Article  CAS  Google Scholar 

  29. K. Z. M. Hossain, A. J. Parsons, C. D. Rudd, I. Ahmed, and W. Thielemans, Eur. Polym. J., 53, 270 (2014).

    Article  CAS  Google Scholar 

  30. X. Yuan, A. F. T. Mak, K. W. Kwok, B. K. O. Yung, and K. Yao, J. Appl. Polym. Sci., 81, 251 (2001).

    Article  CAS  Google Scholar 

  31. M. Joshi and B. S. Butola, J. Appl. Polym. Sci., 105, 978 (2007).

    Article  CAS  Google Scholar 

  32. S. Yilmaz, M. Kodal, T. Yilmaz, and G. Ozkoc, Compos. Pt. B-Eng., 56, 527 (2014).

    Article  CAS  Google Scholar 

  33. M. B. Bilal, P. Viallier-Raynard, B. Haidar, G. Colombe, and A. Lalam, Text. Res. J., 81, 838 (2011).

    Article  CAS  Google Scholar 

  34. C. Migliaresi, D. Cohn, A. D. Lollis, and L. Fambri, J. Appl. Polym. Sci., 43, 83 (1991).

    Article  CAS  Google Scholar 

  35. S. Ghosh and N. Vasanthan, J. Appl. Polym. Sci., 101, 1210 (2006).

    Article  CAS  Google Scholar 

  36. C. Gao, H. Ma, X. Liu, L. Yu, L. Chen, H. Liu, X. Li, and G. P. Simon, Polym. Eng. Sci., 53, 976 (2013).

    Article  CAS  Google Scholar 

  37. Z. Kulinski and E. Piorkowska, Polymer, 46, 10290 (2005).

    Article  CAS  Google Scholar 

  38. H. Li and M. A. Huneault, Polymer, 48, 6855 (2007).

    Article  CAS  Google Scholar 

  39. H. Sirin, M. Kodal, and G. Ozkoc, Polym. Compos., DOI: 10.1002/pc.23319 (2014).

    Google Scholar 

  40. M. Kodal, H. Sirin, and G. Ozkoc, Polym. Eng. Sci., 54, 264 (2014).

    Article  CAS  Google Scholar 

  41. J. Alan, “The Theory of Coloration of Textiles”, 2nd ed. pp.373–427, Society of Dyers and Colourists, West Yorkshire, 1989.

    Google Scholar 

  42. S. Asiaban and S. Moradian, J. Appl. Polym. Sci., 123, 2162 (2012).

    Article  CAS  Google Scholar 

  43. S. Asiaban and S. Moradian, Dyes Pigment., 92, 642 (2012).

    Article  CAS  Google Scholar 

  44. J. Akrman and J. Prikryl, J. Appl. Polym. Sci., 73, 719 (1999).

    Article  CAS  Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Department of Textile Engineering, Erciyes University, Kayseri, 38039, Turkey

    Onur Baykuş, Asım Davulcu & Mehmet Dogan

Authors
  1. Onur Baykuş
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Asım Davulcu
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Mehmet Dogan
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Mehmet Dogan.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Baykuş, O., Davulcu, A. & Dogan, M. Improving the dyeability of poly(lactic acid) fiber using N-Phenylaminopropyl POSS nanoparticle during melt spinning. Fibers Polym 16, 2558–2568 (2015). https://doi.org/10.1007/s12221-015-5613-2

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s12221-015-5613-2

Keywords

Search

Navigation