Abstract
This study proposes a fatigue life prediction method for offshore wind turbines consisting of a fatigue load calculation method that accounts for external environmental factors and system interaction, as well as a fatigue stress spectrum calculation method based on the control strategy. First, we conducted an integrated load analysis considering both external environmental factors and system design characteristics to obtain the ultimate load for flapwise, edgewise, and spanwise directions of the blade. We then applied the ultimate load to the blade finite element model to identify the fatigue critical locations (FCLs) of the blade. Subsequently, we calculated force/moment-local stress relationships considering the applied load magnitude and its change in location according to the control strategy. A 10-min wind speed history was applied to these stress relationships to obtain the unit fatigue stress spectrum at the FCLs. This was then combined with the fatigue resistance of the material to obtain the unit fatigue damage at the FCLs. Finally, we applied the statistical wind speed data at a specific site to the unit fatigue damage to calculate the fatigue damage and life. Based on these results, we evaluated the effect of the loads in each blade direction on the fatigue life of a composite blade.
Similar content being viewed by others
References
H. F. Zhou, H. Y. Dou, L. Z. Qin, Y. Chen, Y. Q. Ni and J. M. Ko, A review of full-scale structural testing of wind turbine blades, Renewable and Sustainable Energy Reviews, 33 (2014) 177–187.
IEC 61400-3 Wind Turbines - Part 1: Design Requirements, 3nd Ed., International Electrotechnical Commission (2005).
H. J. Baek, Fatigue load analysis for 5-MW monopole offshore wind turbine using lumped method, Master’s Thesis, Graduate School of Wind Energy, Pohang University of Science and Technology (2012).
C. D. Kong, T. H. Kim, D. J. Han and Y. Sugiyama, Investigation of fatigue life for a medium scale composite wind turbine blade, International Journal of Fatigue, 28 (10) (2006) 1382–1388.
S. Lee, M. Churchfield, F. Driscoll, S. Simivas, J. Jonkman, P. Moriarty, B. Skaare, F. G. Nielsen and E. Buklum, Load estimation of offshore wind turbine, Energies, 11 (7) (2018) 1985–1910.
C. M. Schwarz, S. Ehrich, R. Martin and J. Peinke, Fatigue load estimations of intermittent wind dynamics based on a blade element momentum method, Journal of Physics: Conference Series, IOP Publishing, 1037 (2018) 1–7.
E. A. Bossanyi, Wind turbine control for load reduction, Wind Energy: An International Journal or Progress and Applications in Wind Power Conversion Technology, 6 (3) (2003) 229–244.
H. M. Liu, Q. Q. Tang, Y. Wang and Y. L. Yuan, Individual pitch control strategy on alleviating periodic load fluctuations, 2015 IEEE International Conference on Cyber Technology in Automation, Control, and Intelligent Systems (CYBER) (2015) 725–728.
E. Muljadi, Pitch-controlled variable-speed wind turbine generation, IEEE Transactions on Industry Applications, 37 (1) (2001) 240–246.
T. Senjyu, R. Sakamoto, N. Urasaki, T. Funabashi, H. Fujita and H. Sekine, Output power leveling of wind turbine generator for all operating regions by pitch angle control, IEEE Transactions on Energy Conversion, 21 (2) (2006) 467–475.
C. Zhang, H. P. Chen and T. L. Huang, Fatigue damage assessment of wind turbine composite blades using corrected blade element momentum theory, Measurement, 129 (2018) 102–111.
M. O. L. Hansen, Aerodynamics of Wind Turbines, Second Edition, EARTHSCAN (2008).
P. K. Fossum, L. Froyd and O. G. Dahlhaug, Design and fatigue performance of large utility-scale wind turbine blades, Journal of Solar Energy Engineering, 135 (3) (2013) 1–11.
R. Kazacoks and P. Jamieson, Evaluation of fatigue loads of horizontal up-scaled wind turbines, Energy Procedia, 80 (2015) 13–20.
Y. J. Jang, C. W. Choi, J. H. Lee and K. W. Kang, Development of fatigue life prediction method and effect of 10-minute mean wind speed distribution of fatigue life of small wind turbine composite blade, Renewable Energy, 79 (2015) 187–198.
C. Sicot, P. Devinant, S. Loyer and J. Hureau, Rotational and turbulence effects on a wind turbine blade. Investigation of the stall mechanisms, Journal of Wind Engineering ad Industrial Aerodynamics, 96 (8-9) (2008) 1320–1331.
X. Amndolese and E. Szechenyi, Ezperimental study of the effect of turbulence on a section model blade oscillating in stall, Wind Energy: An International Journal for Progress and Applications in Wind Power Conversion Technology, 7 (4) (2004) 267–282.
N. Dimitrov, A. Natarajan and J. Mann, Effects of normal and extreme turbulence spectral parameters on wind turbine loads, Renewable Energy, 101 (2017) 1180–1193.
A. Sathen, J. Mann, T. Barlas, W. A. A. M. Bierbooms and G. J. W. van Bussel, Influence of atmospheric stability on wind turbine loads, Wind Energy, 16 (7) (2013) 1013–1032.
N. Dimitrov, A. Natarajan and M. Kelly, Model of wind shear conditional on turbulence and its impact on wind turbine loads, Wind Energy, 18 (11) (2015) 1917–1931.
J. C. Kaimal and J. J. Finnigan, Atmospheric Boundary Layer Flows: Their Structure and Measurement, Oxford University Press (1994).
J. C. Kaimal, J. C. Wyngaard, Y. Izumi and O. R. Cote, Spectral characteristics of surface layer turbulence, Quarterly Journal of the Royal Meteorological Society, 98 (417) (1972) 563–589.
GH-BladedTM ver 4.1 Theory Manual, GL Garrad Hassan (2013).
GH-BladedTM ver 4.1, GL Garrad Hassan (2013).
N. K. Vemula, W. E. De Vries, T. Fischer, A. Cordle and B. Schmidt, Design Solution for the Upwind Reference Offshore Support Structure, Upwind Deliverable D, 4 (2010).
J. Jonkman, S. Butterfield, W. Musial and G. Scott, Definition of a 5-MW Reference Wind Turbine for Offshore System Development, National Renewable Energy Laboratory (NREL) (2009).
B. R. Resor, Definition of a 5MW/61.5 m Wind Turbine Blade Reference Model, Sandia National Laboratories (2013).
ABAQUS ver 2018, Dassult System (2018).
M. A. Miner, Cumulative damage in fatigue, Journal of Applied Mechanis, 12 (A) (1945) 159–164.
B. S. Kim, J. W. Jin, O. Bitkina and K. W. Kang, Ultimate load characteristics of NREL 5-MW offshore wind turbines with different substructures, International Journal of Energy Research, 40 (5) (2016) 639–650.
Acknowledgments
This research was supported by the Korea Institute of Energy Technology Evaluation and Planning (KETEP) and the Ministry of Trade, Industry & Energy (MOTIE) of the Republic of Korea (No. 20173010024950, No.20173010024870).
Author information
Authors and Affiliations
Corresponding author
Additional information
Recommended by Editor Chongdu Cho
Yun-Jung Jang is a Senior Researcher in Institute of Offshore Wind Energy, Kunsan National University, Jeonbuk, Korea. She received her Ph.D. in Mechanical Engineering from Kunsan National University. Her research interests include structural analysis and fatigue analysis for composite structure.
Ki-Weon Kang is a Professor in School of Mechanical Convergence System Engineering, Kunsan National University. He received his Ph.D. degree in 2001 from Hanyang University. His research interests include structural analysis and design for composite structure.
Rights and permissions
About this article
Cite this article
Jang, YJ., Jin, JW., Lee, JH. et al. Long-term durability of offshore wind turbine composite blades based on nonlinear load behavior due to pitch movement. J Mech Sci Technol 34, 2347–2355 (2020). https://doi.org/10.1007/s12206-020-0511-y
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12206-020-0511-y