Skip to main content
SpringerLink
Log in

Design and development of fixture and force measuring system for friction stir welding process using strain gauges

  • Published:
Journal of Mechanical Science and Technology Aims and scope Submit manuscript

Abstract

We developed a clamping system and an instrumented setup for a vertical milling machine for friction stir welding (FSW) operations and measuring the process forces. Taking into account the gap formation (i.e., lateral movement) and transverse movement of the workpiece, a new type of adjustable fixture was designed to hold the workpiece being welded. For force measurement, a strain gauge based force dynamometer was designed, developed and fabricated. The strain gauges were fitted into the specially designed octagonal members to support the welding plates. When the welding force was applied onto the plates, the load was transferred to the octagonal members and strain was induced in the member. The strains of the strain gauges were measured in terms of voltages using a Wheatstone bridge. To acquire forces in FSW operations, a data acquisition system with the necessary hardware and software was devised and connected to the developed setup. The developed setup was tested in actual welding operations. It is found that the proposed setup can be used in milling machine to perform FSW operations.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  1. W. M. Thomas, E. D. Nicholas, J. C. Needhman, M. G. Murch, P. Temple-Smith and C. J. Dawes, International patent application PCT/GB92/02203 and GB patent application 9125978.8, UK Patent Office, London, December 6 (1991).

    Google Scholar 

  2. H. Fujii, L. Cui, M. Maeda and K. Nogi, Effect of tool shape on mechanical properties and microstructure of friction stir welded aluminum alloys, J. of Material Science and Engineering, A 419 (2006) 25–31.

    Article  Google Scholar 

  3. Y. Tozaki, Y. Uematsu and K. Tokaji, Effect of tool geometry on microstructure and static strength in friction stir spot welded aluminium alloys, International J. of Machine Tools & Manufacture, 47 (2007) 2230–2236.

    Article  Google Scholar 

  4. T. R. McNelley, S. Swaminathan and J. Q. Su, Recrystallization mechanisms during friction stir welding/processing of aluminum alloys, Scripta Materialia, 58 (2008) 349–354.

    Article  Google Scholar 

  5. W. Dequing and L. Shuhua, Study of Friction stir welding of aluminum, J. of Materials Science, 39 (2004) 1689–1693.

    Article  Google Scholar 

  6. P. Xue, D. R. Ni, D. Wang, B. L. Xiao and Z. Y. Ma, Effect of friction stir welding parameters on the microstructure and mechanical properties of the dissimilar Al-Cujoints, Material Science and Engineering, A 528 (2011) 4683–4689.

    Article  Google Scholar 

  7. S. Rajakumar, C. Muralidharan and V. Balasubramanian, Influence of friction stir welding process and tool parameters on strength properties of AA7075-T6 aluminium alloy joints, Materials and Design, 32 (2011) 535–549.

    Article  Google Scholar 

  8. B. Parida, S. Pal, P. Biswas, M. M. Mahapatra and S. Tikader, Mechanical and Micro-structural study of friction stir welding of al-alloy, International J. of Applied Research in Mechanical Engineering, I (2011) 69–74.

    Google Scholar 

  9. A. Scialpi, L. A. C. De Filippis and P. Cavaliere, Influence of shoulder geometry on microstructure and mechanical properties of friction stir welded 6082 aluminum alloy, J.s for Materials and Design, 28 (2007) 1124–1129.

    Article  Google Scholar 

  10. M. Boz and A. Kurt, The influence of stirrer geometry on bonding and mechanical properties in friction stir welding process, J. of Materials and Design, 25 (2004) 343–347.

    Article  Google Scholar 

  11. K. Elangovan, V. Balasubramanian and M. Valliappan, Influences of tool pin profile and axial force on the formation of friction stir processing zone in AA6061 aluminium alloy, International J. of Advanced Manufacturing Technology, 38 (2008) 285–295.

    Article  Google Scholar 

  12. K. Elangovan and V. Balasubramanian, Influences of tool pin profile and tool shoulder diameter on the formation of friction stir processing zone in AA6061 aluminium alloy, Materials and Design, 29 (2008) 362–373.

    Article  Google Scholar 

  13. K. Elangovan and V. Balasubramanian, Influences of tool pin profile and welding speed on the formation of friction stir processing zone in AA2219 aluminium alloy, International J. of Materials Processing Technology, 200 (2008) 163–175.

    Article  Google Scholar 

  14. K. Kumar and S. V. Kailas, On the role of axial load and the effect of interface position on the tensile strength of a friction stir welded aluminium alloy, Materials and Design, 29 (2008) 791–797.

    Article  Google Scholar 

  15. K. Kumar and S. V. Kailas, The role of friction stir welding tool on material flow and weld formation, Material Science and Engineering, A 485 (2008) 367–374.

    Article  Google Scholar 

  16. J. H. Record, J. L. Covington, T. W. Nelson, C. D. Sorensen and B. W. webb, A look at the statistical identification of critical process parameters in friction stir welding, Welding J., 4 (2007) 97–103.

    Google Scholar 

  17. Y. M. Hwang, Z. W. Kang, Y. C. Chiou and H. H. Hsu, Experimental study on temperature distributions within the workpiece during friction stir welding of aluminum alloys, International J. of Machine Tools & Manufacture Design, Research and Application, 48 (2008) 778–787.

    Article  Google Scholar 

  18. K. Elangovan and V. Balasubramanian, Influences of tool pin profile and welding speed on the formation of friction stir processing zone in AA2219 aluminium alloy, International J. of Materials Processing Technology, 200 (2008) 163–175.

    Article  Google Scholar 

  19. M. Movahedi, A. H. Kokabi, S. M. Seyed Reihani and H. Najafi, Effect of tool travel and rotation speeds on weld zone defects and joint strength of aluminium steel lap joints made by friction stir welding, Science and Technology of Welding and Joining, 17 (2) (2012) 162–167.

    Article  Google Scholar 

  20. A. Toktas and G. Toktas, Effect of welding parameters and aging process on the mechanical properties of friction stirwelded 6063-T4 Al Alloy, J. of Materials Engineering and Performance, ASM International, DOI: 10.1007/s11665-011-9994-0 (2012).

    Google Scholar 

  21. C. Sharma, D. K. Dwivedi, P. Kumar, Effect of welding parameters on microstructure and mechanical properties of friction stir welded joints of AA7039 aluminum alloy, Materials and Design, 36 (2012) 379–390.

    Article  Google Scholar 

  22. H. Aydin, M. Tutar, A. Durmus¸ A. Bayram and T. Sayaca, Effect of welding parameters on tensile properties and fatigue behavior of friction stir welded 2014-T6 aluminum alloy, Trans Indian Inst Met (2012) DOI 10.1007/s12666-011-0069-6.

    Google Scholar 

  23. V. Richter-Trummera, E. Suzano, M. Beltrão, A. Roos, J. F. dos Santos and P. M. S. T. de Castro, Influence of the FSW clamping force on the final distortion and residual stress field, Material Science and Engineering, A (538) (2012) 81–88.

    Article  Google Scholar 

  24. T. A. Davis, Y. C. Shin and B. Yao, Observer-based adaptive robust control of friction stir welding axial force, IEEE/ASME Transactions on Mechatronics (2010).

    Google Scholar 

  25. J. Kandasamy, M. M. Hussain and S. Rajesham, Modifications in FSW fixture design for stronger IMC and superior mechanical properties in AA7075 alloys, International J. on Mechanical & Automobile Engineering, 17 (2011) 21–26.

    Google Scholar 

  26. L. Fratini, F. Micari, G. Buffa and V. F. Ruisi, A new fixture for FSW processes of titanium alloys, CIRP Annals — Manufacturing Technology, 59 (2010) 271–274.

    Article  Google Scholar 

  27. P. K. Baghel, Design and development of fixture for friction stir welding, Innovative Systems Design and Engineering, 12 (2012) 40–47.

    Google Scholar 

  28. D. Johnson, Creating an affordable option for friction stir welding, National Instruments, http://sine.ni.com/cs/app/doc/p/id/cs-11860, dated: 02 March (2012).

    Google Scholar 

  29. C. Blignault, D. G. Hattingh, G. H. Kruger, T. I. van Niekerk and M. N. James, Friction stir weld process evaluation by multi-axial transducer, Measurement, 41 (2008) 32–43.

    Article  Google Scholar 

  30. J. E. Mitchell, The experimental thermo-mechanics of friction stir welding, M.S. Thesis, Vanderbilt University (2002).

    Google Scholar 

  31. I. Korkut, A dynamometer design and its construction for milling operation, Materials and Design, 24 (2003) 631–637.

    Article  Google Scholar 

  32. S. Yaldiz and F. Unsaçar, A dynamometer design for measurement the cutting forces on turning, Measurement, 39 (2006) 80–89.

    Article  Google Scholar 

  33. S. Karabay, Analysis of drill dynamometer with octagonal ring type transducers for monitoring of cutting forces in drilling and allied process, Materials and Design, 28 (2007) 673–685.

    Article  Google Scholar 

  34. S. Karabay, Design criteria for electro-mechanical transducers and arrangement for measurement of strains due to metal cutting forces acting on dynamometers, Materials and Design, 28 (2007) 496–506.

    Article  Google Scholar 

  35. S. Yaldiz, F. Unsaçar, H. Saglam and H. Isik, Design, development and testing of a four-component milling dynamometer for the measurement of cutting force and torque, Mechanical Systems and Signal Processing, 21 (2007) 1499–1511.

    Article  Google Scholar 

  36. S. Yaldiz and F. Unsaçar, Design, development and testing of a turning dynamometer for cutting force measurement, Materials and Design, 27 (2006) 839–846.

    Article  Google Scholar 

  37. D. M. Stefanescu, Handbook of force transducers principles and components, Springer, First Edition (2011).

    Book  Google Scholar 

  38. F. P. Beer, E. R. Johnston Jr., J. T. Dewolf and D. F. Mazurek, Mechanics of Materials, Fifth Edition, Tata McGraw Hill (2010).

    Google Scholar 

  39. M. J. O’dogherty, A dynamometer to measure the forces on a sugar beet topping knife, J. of Agricultural Engineering Research, 20 (1975) 339–345.

    Article  Google Scholar 

  40. N. T. Younis and B. Kang, Averaging effects of a strain gage, J. of Mechanical Science and Technology, 25 (1) (2011) 163–169.

    Article  Google Scholar 

  41. H. W. Ng and P. Wey, Strain gage evaluation with fourpoint bending at moderate temperatures, J. of Experimental Mechanics, 37 (1997) 237–244.

    Article  Google Scholar 

  42. Strain gauge measurement- A tutorial, National Instruments, Application note 078 (1998).

  43. Strain gauges and instruments, Vishay Precision Group, Technical Note TN 505-4 (2010).

  44. R. Nakka, Mounting Strain Gauges, 1 (2002).

    Google Scholar 

  45. R. Brougham and G. Mclean, Strain gauge installation, Mechanical 455 Supplement to Laboratory, 3 (2002).

    Google Scholar 

  46. Surface preparation for strain gauge bonding, Vishay Precision Group, Application Note B-129-8 (2009).

  47. R. L. Hannah and S. E. Reed, Strain gage user’s handbook, Elsevier Science Publishers Ltd., London, England & Society for Measurement Mechanics, Bethel, CT USA (1992).

    Google Scholar 

  48. R. A. Gayakwad, Op-amps and linear integrated circuits, Pearson, Fourth Edition (2005).

    Google Scholar 

  49. T. T. Lang, Electronics of measuring systems: Practical implementation of analogue and digital techniques, Wiley (1987).

    Google Scholar 

  50. Data Sheet INA122, Burr-Brown Corporation, PDS-1388B (1997).

Download references

Author information

Authors and Affiliations

  1. Department of Mechanical Engineering, IIT, Guwahati, 781039, India

    Biswajit Parida, Shiv Dayal Vishwakarma & Sukhomay Pal

Authors
  1. Biswajit Parida
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Shiv Dayal Vishwakarma
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Sukhomay Pal
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Sukhomay Pal.

Additional information

Recommended by Associate Editor Sung Lim Ko

B. Parida is a research scholar in the Department of Mechanical Engineering, IIT Guwahati. His research topic is related to the experimental investigation of friction stir welding process.

S. D. Vishwakarma is currently working as a manager in Tata Motors Ltd, Pune. His current research interests include manufacturing and design.

Sukhomay Pal is an assistant professor in the Department of Mechanical Engineering, IIT Guwahati. His research interests include welding process monitoring and control, modeling and optimization of manufacturing processes using soft-computing techniques.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Parida, B., Vishwakarma, S.D. & Pal, S. Design and development of fixture and force measuring system for friction stir welding process using strain gauges. J Mech Sci Technol 29, 739–749 (2015). https://doi.org/10.1007/s12206-015-0134-x

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s12206-015-0134-x

Keywords

Search

Navigation