Skip to main content
Log in

Ellipse-based leg-trajectory generation for galloping quadruped robots

  • Published:
Journal of Mechanical Science and Technology Aims and scope Submit manuscript

Abstract

Controlling the motions of the front and rear legs and regulating the compliance of the legs are important for stable gallop. In this paper, a new method called ellipse-based trajectory generation method (ETGM) to generate foot trajectories for galloping quadrupeds is proposed. Unlike many previous works which attempted controlling foot trajectory, which need a sophisticated algorithm to avoid forcing the feet out of the workspace and thus making galloping unstable, a new trajectory generation method is based on an elliptic trajectory with constant radii but with changes in its center position. The rotational speed of the elliptic trajectory or the orbit trajectory is determined by the desired height of galloping and the running speed. It is assumed that each leg of a galloping quadruped robot has passive ankle joints with passive springs, thus acting as a spring loaded inverted pendulum (SLIP). To check the performance and effectiveness of the proposed method, a series of computer simulations of a 2-D quadruped robot galloping in the sagittal plane were performed. The simulation results show that the proposed method is simple to implement and very effective in generating stable gallop.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Similar content being viewed by others

References

  1. J. K. Hodgins and M. H. Raibert, Adjusting step length for rough terrain locomotion, IEEE Tr. On Robotics and Automation, 7(3) (1991) 289–298.

    Article  Google Scholar 

  2. S.-H. Hyon, X. Jiang, T. Emura and T. Ueta, Passive running of 1/2/3-lagged robots, Proc. IEEE/ RSJ Int. Conf. on Intelligent Robots and Systems, (2004) 3532–3539.

  3. A. Kawamura, K. Sugio, K. Suzuki and C. Zhu, Simulation study on one leg jumping for biped running, Proc. of IEEE Int. Workshop on Advanced Motion Control, (2004) 71–74.

  4. M. H. Raibert, Legged Robots That Balance, MIT Press, (1986).

  5. R. M. Alexander, Three uses for spring in legged locomotion, Int. J. of Robotics Research, 9(2) (1990) 53–61.

    Article  Google Scholar 

  6. J. E. Seipel and P. Holmes, Running in three dimensions: Analysis of a point-mass sprung-leg model, Int. J. of Robotics Research, 24(8) (2005), 657–674.

    Article  Google Scholar 

  7. I. Poulakakis, J. A. Smith and M. Buehler, On the dynamics of bounding and extensions towards the half-bound and the gallop gaits, Proc. Int. Symp. on Adaptive Motion of Animals and Machines, (2003) 453–458.

  8. R. J. Full and D. E. Koditschek, Templates and anchors: Neuromechanical hypotheses of legged locomotion on land, J. of Experimental Biology, 202(2323) (1999) 3325–3332.

    Google Scholar 

  9. Y. Fukuoka and H. Kimura, Adaptive dynamic walking of a quadruped robot on irregular terrain based on biological concepts, Int. J. of Robotics Research, 22(3) (2003) 187–202.

    Article  Google Scholar 

  10. M. W. Spong, S. Hutchinson and M. Vidyasager, Robot Modeling and Control, John Wiley & Sons, (2006).

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Jong Hyeon Park.

Additional information

This paper was recommended for publication in revised form by Associate Editor Doo Yong Lee

Jong Hyeon Park received his B.S. degree in mechanical engineering from Seoul National University in 1981 and his M.S. and Ph.D. degrees from the Massachusetts Institute of Technology in 1983 and 1991, respectively. Since 1992, he has been with the School of Mechanical Engineering at Hanyang University. He was a KOSEF-JSPS Visiting Researcher with Waseda University, Tokyo, Japan, in 1999, and a KOSEFCNR Visiting Researcher with Scuola Superiore Sant’Anna, Pisa, Italy in 2000, a Visiting scholar with MIT, Cambridge, USA, in 2002–2003. He was also associated with Brooks Automation Inc., Chelmsford, MA, in 1991–1992 and 2001–2002.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Kim, K.Y., Park, J.H. Ellipse-based leg-trajectory generation for galloping quadruped robots. J Mech Sci Technol 22, 2099–2106 (2008). https://doi.org/10.1007/s12206-008-0705-1

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s12206-008-0705-1

Keywords

Navigation