Abstract
The rational and effective disposal of sludge has always been a key topic of interest. Freeze—thaw cycles can change the mechanical properties and structural characteristics of soils, leading to a range of engineering geological problems. The sludge curing technology can be used to transform municipal sludge into a new type of sludge-cured lightweight soil. The effects of the number of freeze-thaw cycles and freezing temperature on the unconfined compressive strength and compression modulus of the improved sludge-solidified lightweight soil were investigated by unconfined compressive strength and one-dimensional compression tests. A structural quantitative parameter that considers the freeze-thaw cycles, i.e., the freeze-thaw structural potential, is proposed. The variation pattern of the freeze-thaw structural potential under the influence of different factors was analysed. The test results show that the strength and compression modulus initially rapidly decreased, and then tended to be stable with the increase in the number of freeze-thaw cycles. A lower freezing temperature led to smaller strength and compression modulus. The first two freeze-thaw cycles had a greater influence on the freeze-thaw structure potential. The influence of freezing temperature on the freeze-thaw structural potential is significant when the pressure and number of freeze-thaw cycles are small, and diminishes as the pressure and number of freeze-thaw cycles increase. It was found that there was a good non-linear relationship between the freeze-thaw structural potential and both the unconfined compressive strength and compressive modulus. On this basis, models for the freeze-thaw structural potential as a function of the unconfined compressive strength and compression modulus, taking into account the effects of freezing temperature and the number of freeze-thaw cycles, are proposed respectively, and the accuracy of the models is further verified. The results can provide a reference for the applications of solidified light soil in various fields including engineering fillings in seasonally frozen areas.
Similar content being viewed by others
References
Ahmadi S, Ghasemzadeh H, Changizi F (2021) Effects of a low-carbon emission additive on mechanical properties of fine-grained soil under freeze-thaw cycles. Journal of Cleaner Production 304(4): 127157, DOI: https://doi.org/10.1016/j.jclepro.2021.127157
Al-Bared MAM, Harahap IS, Marto A, Abad SVANK, Mustaffa Z, Ali MO (2019) Mechanical behaviour of waste powdered tiles and Portland cement treated soft clay. Geomechanics and Engineering 19(1):37–47, DOI: https://doi.org/10.12989/gae.2019.19.1.037
Al-Bared Mam, Marto A, Latifi N (2018a) utilization of recycled tiles and tyres in stabilization of soils and production of construction materials — A state-of-the-art review. KSCE Journal of Civil Engineering 22(10):3860–3874, DOI: https://doi.org/10.1007/s12205-018-1532-2
Al-Bared MAM, Marto A, Latifi N, Horpibulsuk S (2018b) Sustainable improvement of marine clay using recycled blended tiles. Geotechnical and Geological Engineering 36(5):3135–3147, DOI: https://doi.org/10.1007/s10706-018-0525-8
Al-Bared MAM, Mustaffa Z, Armaghani DJ, Marto A, Yunus NZM, Hasanipanah M (2021) Application of hybrid intelligent systems in predicting the unconfined compressive strength of clay material mixed with recycled additive. Transportation Geotechnics 30:100627, DOI: https://doi.org/10.1016/j.trgeo.2021.100627
Aldaood A, Bouasker M, Al-Mukhtar M (2014) Impact of freeze-thaw cycles on mechanical behaviour of lime stabilized gypseous soils. Cold Regions Science & Technology 99:38–45, DOI: https://doi.org/10.1016/j.coldregions.2013.12.003
Chen H, Yuan H, Mao L, Hashmi MZ, Xu F, Tang X (2020) Stabilization/solidification of chromium-bearing electroplating sludge with alkali-activated slag binders. Chemosphere 240:124885, DOI: https://doi.org/10.1016/j.chemosphere.2019.124885
Chen P, Feng B, Lin YJ, Lin C (2019a) Solidification and stabilization of sewage sludge and MSWI bottom ash for beneficial use as construction materials. Journal of Materials in Civil Engineering 31(1):04018351, DOI: https://doi.org/10.1061/(ASCE)MT.1943-5533.0002572
Chen ZF, Chen H, Li JF, Li H, Ma WL (2019b) Study on the changing rules of silty clay’s pore structure under freeze-thaw cycles. Advances in Civil Engineering 1–11, DOI: https://doi.org/10.1155/2019/7493872
Dohnálková B, Drochytka R, Hodul J (2018) New possibilities of neutralisation sludge solidification technology. Journal of Cleaner Production 204:1097–1107, DOI: https://doi.org/10.1016/j.jclepro.2018.08.095
Eskisar T, Altun S, Kalipcilar I (2015) Assessment of strength development and freeze-thaw performance of cement treated clays at different water contents. Cold Regions Science & Technology 111:50–59, DOI: https://doi.org/10.1016/j.coldregions.2014.12.008
Feng L, Bade R, Oh S, Shin WS (2012) Immobilization of heavy metals in a contaminated soil using organic sludge char and other binders. Korean Journal of Chemical Engineering 29(10):1362–1372, DOI: https://doi.org/10.1007/s11814-012-0015-2
GB/T 50123–2019 (2019) Standard for Geotechnical Test Methods. China Planning Press, Beijing, China
Haeri SM, Khosravi A, Garakani AA, Ghazizadeh S (2017) Effect of soil structure and disturbance on hydromechanical behavior of collapsible loessial soils. International Journal of Geomechanics 17(1):04016021, DOI: https://doi.org/10.1061/(asce)gm.1943-5622.0000656
Hao Y, Wang T, Wang J (2019) Structural properties of unsaturated compacted loess for various sample moisture contents. Arabian Journal of Geosciences 12(8):1–10, DOI: https://doi.org/10.1007/s12517-019-4421-1
Hatinoglu MD, Sanin FD (2021) Sewage sludge as a source of microplastics in the environment: A review of occurrence and fate during sludge treatment. Journal of Environmental Management 295:113028, DOI: https://doi.org/10.1016/j.jenvman.2021.113028
Hotineanu A, Bouasker M, Aldaood A, Al-Mukhtar M (2015) Effect of freeze-thaw cycling on the mechanical properties of lime-stabilized expansive clays. Cold Regions Science & Technology 119:151–157, DOI: https://doi.org/10.1016/j.coldregions.2015.08.008
Khalid U, Ye G, Yadav SK, Zhou A, Gu L (2020) Consolidation pressure consequences on the soil structure of artificial structured marine clay: Macro and micro evaluation. Geotechnical and Geological Engineering, DOI: https://doi.org/10.1007/s10706-020-01489-x
Lang L, Liu N, Chen B (2020) Strength development of solidified dredged sludge containing humic acid with cement, lime and nano-SiO. Construction and Building Materials 230(10):1–11, DOI: https://doi.org/10.1016/j.conbuildmat.2019.116971
Lee S, Chang I, Chung MK, Kim Y, Kee J (2017) Geotechnical shear behavior of xanthan gum biopolymer treated sand from direct shear testing. Geomechanics and Engineering 12(5):831–847, DOI: https://doi.org/10.12989/gae.2017.12.5.831
Lee S, Im J, Cho GC, Chang I (2019) Laboratory triaxial test behavior of xanthan gum biopolymer-treated sands. Geomechanics and Engineering 17(5):445–452, DOI: https://doi.org/10.12989/gae.2019.17.5.445
Leng J, Liao C, Ye G, Jeng DS (2018) Laboratory study for soil structure effect on marine clay response subjected to cyclic loads. Ocean Engineering 147:45–50, DOI: https://doi.org/10.1016/j.oceaneng.2017.10.020
Liang Y, Xu D, Feng P, Hao B, Guo Y, Wang S (2021) Municipal sewage sludge incineration and its air pollution control. Journal of Cleaner Production 295:126456, DOI: https://doi.org/10.1016/j.jclepro.2021.126456
Lin HR, Zeng LH, Zhang PP, Jiao BQ, Shiau Y, Li DW (2022) Solidification of chromium-containing sludge with attapulgite combined alkali slag. Environmental Science and Pollution Research 29(9):13580–13591, DOI: https://doi.org/10.1007/s11356-021-16193-3
Liu JJ, Zha FS, Long X, Kang B, Yang CB, Feng Q, Zhang W, Zhang JW (2020) Strength and microstructure characteristics of cement-soda residue solidified/stabilized zinc contaminated soil subjected to freezing-thawing cycles. Cold Regions Science & Technology 172:102992, DOI: https://doi.org/10.1016/j.coldregions.2020.102992
Ma C, Sheng C, Lian J, Liu F (2022) Solidification sludge as a scour countermeasure in ocean engineering. Ocean Engineering 244:110423, DOI: https://doi.org/10.1016/j.oceaneng.2021.110423
Meng F, Chen R, Kang X, Li Z (2020) e-p curve-based structural parameter for assessing clayey soil structure disturbance. Bulletin of Engineering Geology and the Environment 79(8):4387–4398, DOI: https://doi.org/10.1007/s10064-020-01833-8
Nguyen T, Cui YJ, Ferber V, Herrier G, Ozturk T, Plier F, Puiatti D, Salager S, Tang AM (2019) Effect offreeze-thaw cycles on mechanical strength of lime-treated fine-grained soils. Transportation Geotechnics 21:100281, DOI: https://doi.org/10.1016/j.trgeo.2019.100281
Oh S, Shin WS (2017) Applicability of solidified/stabilized dye sludge char as a landfill cover material. KSCE Journal of Civil Engineering 21(7):2573–2583, DOI: https://doi.org/10.1007/s12205-017-0064-5
Oliveira JATD, Cássaro FAM, Pires LF (2021) Estimating soil porosity and pore size distribution changes due to wetting-drying cycles by morphometric image analysis. Soil and Tillage Research 205:104814, DOI: https://doi.org/10.1016/j.still.2020.104814
Peng L, Chen B (2021) Study on the basic properties and mechanism of waste sludge solidified by magnesium phosphate cement containing different active magnesium oxide. Construction and Building Materials 281:122609, DOI: https://doi.org/10.1016/j.conbuildmat.2021.122609
Qin Y, Li G, Chen X, Fan K (2021) Study on shear strength and structure of Malan loess under wetting—drying cycles. Arabian Journal of Geosciences 14(24):1–12, DOI: https://doi.org/10.1007/s12517-021-09259-6
Reid JM, Brookes AH (1999) Investigation of lime stabilised contaminated material. Engineering Geology 53:217–231, DOI: https://doi.org/10.1016/S0013-7952(99)00035-6
Shen ZJ (1996) Mathematical model of soil structure — The core issue of soil mechanics in the 21st century. Chinese Journal of Geotechnical Engineering 18(1):95–97
Shibi T, Kamei T (2014) Effect of freeze-thaw cycles on the strength and physical properties of cement-stabilised soil containing recycled bassanite and coal ash. Cold Regions Science & Technology 106:36–45, DOI: https://doi.org/10.1016/j.coldregions.2014.06.005
Shirvani RA, Noorzad R (2022) Effects of polypropylene fibre on mechanical properties of fat clay stabilised with sludge ash of wood and paper mill. Road Materials and Pavement Design 1–24, DOI: https://doi.org/10.1080/14680629.2022.2030786
Song Y, Wang JQ, Chen XJ, Yu SZ, Ban RL, Yang X, Han Y (2022) Study the effects of dry-wet cycles and cadmium pollution on the mechanical properties and microstructure of red clay. Environmental Pollution 119037, DOI: https://doi.org/10.1016/j.envpol.2022.119037
Starkloff T, Larsbo M, Stolte J, Hessel R, Ritsema C (2017) Quantifying the impact of a succession of freezing-thawing cycles on the pore network of a silty clay loam and a loamy sand topsoil using X-ray tomography. Catena 156:365–374, DOI: https://doi.org/10.1016/j.catena.2017.04.026
Terzaghi K (1943) Theoretical soil mechanics. New York: Wiley Wang D, Korkiala-Tanttu L (2016) On the normalized behavior of naturally and artificially structured clays. Engineering Geology 214:20–28, DOI: https://doi.org/10.1016/j.enggeo.2016.09.006
Wang Z, Wei B, Wu X, Zhu H, Wang Q, Xiong Z, Ding Z (2021) Effects of dry-wet cycles on mechanical and leaching characteristics of magnesium phosphate cement-solidified Zn-contaminated soils. Environmental Science and Pollution Research 28(14):18111–18119, DOI: https://doi.org/10.1007/s11356-020-11977-5
Xie DY, Qi JL, Zhu YL (1999) Structural parameters of soil and their relationship with deformation-strength. J Hydraul Eng 10:3–8, DOI: https://doi.org/10.13243/j.cnki.slxb.1999.10.001
Xu BB (2018) Influence of Soil Structure on the Mechanical Response of Soft Soil. E3S Web of Conferences 38:03027, DOI: https://doi.org/10.1051/e3sconf/20183803027
Yang AW, Hu Y (2018) Engineering properties and microscopic mechanism of new urban sludge-solidified soil. Geotechnical Mechanics 39(S1): 69–78, DOI: https://doi.org/10.16285/j.rsm.2017.2046
Yang AW, Hu Y, Wang T, Lu LQ (2017a) Sludge curing agent, application thereof and sludge curing soil, Patent CN106277663A, Tianjin, China
Yang AW, Xu CL, Lang RQ, Wang T (2021) Three-dimensional mechanical properties of urban sludge consolidated soil under freeze-thaw cycles and its damage criterion. Geotechnical Mechanics 42(4):963–975, DOI: https://doi.org/10.16285/j.rsm.2020.0833
Yang AW, Yang SP, Yang SK, Jiang S, Wang YC (2020) Study on the dynamic strength characteristics of urban sludge cured soil under freeze-thaw cycles. Journal of Engineering Geology 1–12, DOI: https://doi.org/10.13544/j.cnki.jeg.2020-033
Yang AW, Yuan TY, Yang SP, Zhang W (2022) Dynamic cumulative deformation characteristics of urban sludge-solidified soil under the coupled action of dry-wet cycle and initial static-deviatoric stress. Journal of Engineering Geology 30(1):117–126, DOI: https://doi.org/10.13544/j.cnki.jeg.2020-215
Yang AW, Zhao MS, Lu LQ (2017b) Solidified soil and preparation method thereof Patent. CN106278355A, Tianjin, China
Yang JK, Lu HJ, Zhang X, Li JX, Wang WW (2017b) An experimental study on solidifying municipal sewage sludge through skeleton building using cement and coal gangue. Advances in Materials Science and Engineering 1–13, DOI: https://doi.org/10.1155/2017/5069581
Yang ZP, Wang Y, Li DH, Li XY, Liu XR (2020) Influence of freeze-thaw cycles and binder dosage on the engineering properties of compound solidified/stabilized lead-contaminated soils. International Journal of Environmental Research and Public Health 17(3):1077, DOI: https://doi.org/10.3390/ijerph17031077
Yu B, Luo J, Xie H, Yang H, Chen S, Liu J, Li YY (2021) Species, fractions, and characterization of phosphorus in sewage sludge: A critical review from the perspective of recovery. Science of The Total Environment 786:147437, DOI: https://doi.org/10.1016/j.scitotenv.2021.147437
Zainuddin N, Yunus NZM, Al-Bared MAM, Marto A, Harahap ISHA, Rashid AS (2018) Measurement 131:50–60, DOI: https://doi.org/10.1016/j.measurement.2018.08.053
Zaman MM, Naji KN (2003) Effect of freeze-thaw cycles on class C fly ash stabilized aggregate base. Proceedings of the 82nd Annual Meeting, Transportation Research Board, DC, Washington, 1–6
Zhang ZY, Li LH, Zhang JS, Ma C, Wu X (2018) Solidification of oily sludge. Petroleum Science and Technology 36:1–7, DOI: https://doi.org/10.1080/10916466.2017.1419482
Zhen G, Lu X, Cheng X, Hua C, Yan X, Zhao Y (2012) Hydration process of the aluminate 12CaO·7Al2O3-assisted Portland cement-based solidification/stabilization of sewage sludge. Construction and Building Materials 30:675–681, DOI: https://doi.org/10.1016/j.conbuildmat.2011.12.049
Acknowledgments
Financial support from the National Natural Science Foundation of China (Grant No. 41972285, 42177119, 51978440) and Tianjin Science and Technology Project (Grant No. 19JCZDJC39700) and Special Fund for Fundamental Scientific Research Business Expenses of Central Universities (Grant No. 2232021A-07) is greatly acknowledged.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Yang, A., Yang, S., Zhong, X. et al. Mechanical Properties and Structural Evolution of Sludge-cured Lightweight Soils Subjected to Freeze-thaw Cycles. KSCE J Civ Eng 26, 4478–4488 (2022). https://doi.org/10.1007/s12205-022-2172-0
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12205-022-2172-0