Abstract
The applicability of solidification/stabilization (S/S) to reduce leaching potential of metal(loid)s from dye sludge char (DSC) and the suitability of the treated DSC as a landfill cover material was investigated. The dye sludge charred at 350ºC (DSC350) and 550ºC (DSC550) was solidified and stabilized by the amendment of cement, lime, ladle slag or hydroxyapatite (HAP). Leaching potential of metal(loid)s from the binder-amended DSC550 was below the Korean Standard Leaching Test (KSLT) and US EPA Toxicity Characterization Leaching Procedure (TCLP) criteria. DSC550 had higher Unconfined Compressive Strength (UCS) than DSC350 due to higher ash content and less volatile matter content. Calcium oxide and silica present in cement, lime or ladle slag enhanced the UCS of DSCs. The dose of 0.05 g cement, 0.075 g lime or 0.075 g ladle slag per g of dry DSC550, respectively was optimum to meet the UCS criteria (350 kPa), but not HAP. After blending with a natural soil, the hydraulic conductivity of the binder-amended DSC550 was higher than that of clayey soil (1 × 10−5 cm/s to 1 × 10−6 cm/s). Further study such as blending with clayey soil is needed to decrease hydraulic conductivity to 10−5 to 10−6 cm/s.
Similar content being viewed by others
References
Bednarik, V., Vondruska, M., Sild, M., and Koutny, M. (2004). “Stabilization/solidification of wastewater treatment sludge.” J. Environ. Eng., Vol. 130, No. 12, pp. 1527–1533, DOI: 10.1061/(ASCE)0733-9372(2004)130:12(1527).
Chen, L. and Lin, A.-F. (2009). “Stabilization treatment of soft subgrade soil by sewage sludge ash and cement.” J. Hazard. Mater., Vol. 162, No. 1, pp. 321–327, DOI: 10.1016/j.jhazmat.2008.05.060.
Chung, H. I., Yu, J., and Lee, Y. S. (2006). “Utilization of stabilized and solidified sewage sludge as a daily landfill cover material.” KSCE J. Civ. Eng., Vol. 10, No. 4, pp. 255–258, DOI: 10.1007/BF02830779.
Deja, J. (2002). “Immobilization of Cr6+, Cd2+, Zn2+ and Pb2+ in alkaliactivated slag binders.” Cem. Concr. Res., Vol. 32, No. 12, pp. 1971–1979, DOI: 10.1016/S0008-8846(02)00904-3.
Fatta, D., Papadopoulos, A., Stefanakis, N., Loizidou, M., and Savvides, C. (2004). “An alternative method for the treatment of waste produced at a dye and a metal plating industry using natural and/or waste materials.” Waste Manage. Res., Vol. 22, No. 4, pp. 234–239, DOI: 10.1177/0734242X04045428.
Garcés, P., Carrión, M. P., García-Alcocel, E., Payá, J., Monzó, J., and Borrachero, M. V. (2008). “Mechanical and physical properties of cement blended with sewage sludge ash.” Waste Manage, Vol. 28, No. 12, pp. 2495–2502, DOI: 10.1016/j.wasman.2008.02.019.
Head, K. H. (1982). Manual of Soil Laboratory Testing., Vol. 2, Wiley, ISBN 0-7273-1305-3, DOI: 10.1144/qjegh2014-021.
Izquierdo, M., Querol, X., Davidovits, J., Antenucci, D., Nugteren, H., and Fernandez-Pereira, C. (2009). “Coal fly ash-slag-based geopolymers: Microstructure and metal leaching.” J. Hazard. Mater., Vol. 166, No. 1, pp. 561–566, DOI: 10.1016/j.jhazmat.2008.11.063.
Jin, F., Wang, F., and Al-Tabbaa, A. (2016). “Three-year performance of in-situ solidified/stabilized soil using novel MgO-bearing binders.” Chemosphere, Vol. 144, pp. 681–688, DOI: 10.1016/j.chemosphere.2015.09.046.
Kettler, T. A., Doran, J. W., and Gilbert, T. L. (2001). “Simplified method for soil particle-size determination to accompany soil-quality analyses.” Soil Sci. Soc. Am. J., Vol. 65, No. 3, pp. 849–852, DOI: 10.2136/sssaj2001.653849x.
Kim, E.-H., Cho, J.-K., and Yim, S. (2005). “Digested sewage sludge solidification by converter slag for landfill cover.” Chemosphere, Vol. 59, No. 3, pp. 387–395, DOI: 10.1016/j.chemosphere.2004. 10.038.
Korean Ministry of Environment (2000). Standard Methods for Testing Solid Wastes.
Li, F., Bade, R., Oh, S., and Shin, W. S. (2012). “Immobilization of heavy metals in a contaminated soil using organic sludge char and other binders.” Korean J. Chem. Eng., Vol. 29, No. 10, pp. 1362–1372, DOI: 10.1007/s11814-012-0015-2.
Lin, K. L., Chang, W. C., Lin, D. F., Luo, H. L., and Tsai, M. C. (2008). “Effects of nano-SiO2 and different ash particle sizes on sludge ashcement mortar.” J. Environ. Manage., Vol. 88, No. 4, pp. 708–714, DOI: 10.1016/j.jenvman.2007.03.036.
Ma, B., Shin, W. S., Oh, S. H., Park, Y. J., and Choi, S. J. (2010). “Adsorptive removal of Co and Sr ions from aqueous solution by synthetic hydroxyapatite nanoparticles.” Sep. Sci. Technol., Vol. 45, pp. 453–462, DOI: 10.1080/01496390903484941.
Malliou, O., Katsioti, M., Georgiadis, A., and Katsiri, A. (2007). “Properties of stabilized/solidified admixtures of cement and sewage sludge.” Cem. Concr. Comp., Vol. 29, No. 1, pp. 55–61, DOI: 10.1016/j.cemconcomp.2006.08.005.
Malviya, R. and Chaudhary, R. (2006). “Factors affecting hazardous waste solidification/stabilization: A review.” J. Hazard. Mater., Vol. 137, No. 1, pp. 267–276, DOI: 10.1016/j.jhazmat.2006.01.065.
Marjanovic, V. M. and Ivanovic, A. T. (2015). “Selection the stailization/solidification process and selection the binders and reagents depending on the type of waste material in the function of envionmental protection.” Mining Metallurgy Eng. Bor., Vol. 622, No. 3, pp. 89–108, DOI: 10.5937/MMEB1503089M.
Ogundiran, M. B., Lawal, O. O., and Adejumo, S. A. (2015). “Stabilisation of Pb in Pb smelting slag-contaminated soil by compost-modified biochars and their effcts on maize plant growth.” J. Environ. Protect., Vol. 6, pp. 771–780, DOI: 10/4236/jep.2015.68070.
Oh, S., Bade, R., Li, F., and Shin, W. S. (2014). “Solidification/stabilization of heavy metals in tannery sludge char with various binders.” Desal. Water Treat., Vol. 52, Nos. 4–6, pp. 889–899, DOI: 10.1080/19443994.2013.827311.
Shi, C. and Day, R. L. (2000). “Pozzolanic reaction in the presence of chemical activators: Part II Reaction products and mechanisms.” Cement Concrete Res., Vol. 30, No. 4, pp. 607–613, DOI: 10.1016/S0008-8846(00)00214-3.
Singh, T. S. and Pant, K. K. (2006). “Solidification/stabilization of arsenic containing solid wastes using Portland cement, fly ash and polymeric materials.” J. Hazard. Mater., Vol. 131, Nos. 1–3, pp. 29–36, DOI: 10.1016/j.jhazmat.2005.06.046.
Srivastava, S., Chaudhary, R., and Khale, D. (2008). “Influence of pH, curing time and environmental stress on the immobilization of hazardous waste using activated fly ash.” J. Hazard. Mater., Vol. 153, No. 3, pp. 1103–1109, DOI: 10.1016/j.jhazmat.2007.09.065.
Turhanen, P. A., Vepsalainen, J. J., and Peraniemi, S. (2015). “Advanced material and approach for metal ions removal from aqueous solutions.” Sci. Reports, Vol. 5, pp. 1–8, DOI: 10.1038/srep08992.
US EPA (1989). Stabilization/Solidification of CECLA and RCRA wastes: Physical tests, chemical testing procedures, technology screening and field activities, Toxicity Characteristics Leaching Procedure, EPA/625/6-89/022, U.S Environmental Protection Agency, Washington DC.
US EPA (2007). Method 3051: Microwave assisted acid digestion of sediments, sludges, soils, and oils. In: Test Methods for the Evaluation of Solid Waste: Laboratory Manual Physical Chemical Methods. SW-846, Office of Solid Waste, Washington, DC, USA.
US EPA (2007). Method 9081: Cation-Exchange Capacity of Soils (Sodium Acetate), Test Methods for the Evaluation of Solid Waste: Laboratory Manual Physical Chemical Methods. SW-846, Office of Solid Waste, Washington, DC, USA.
Wen, B., Li, R.-J., Zhang, S., Shan, X.-Q., Fang, J., Xiao, K., and Khan, S.U. (2009). “Immobilization of pentachlorophenol in soil using carbonaceous material amendments.” Environ. Pollut., Vol. 157, No. 3, pp. 968–974, DOI: 10.1016/j.envpol.2008.10.015.
Xu, X.-H., Li, M.-L., and Yuan, Y. (2012). “Treatment of direct blending dye wastewater and recycling of dye sludge.” Molecules, Vol. 17, No. 3, pp. 2784–2795, DOI: 10.3390/molecules17032784.
Yang, G. C. C. (1993). “Durability study of a solidified mercury-containing sludge.” J. Hazard. Mater., Vol. 34, No. 2, pp. 217–223, DOI: 10.1016/0304-3894(93)85006-Z.
Yun, S. W. and Yu, C. (2015). “Immobilization of Cd, Zn, and Pb from soil treated by limestone with variation of pH using a column test” J. Chem., Vol. 2015, ID641415, 8pages, DOI: 10.1155/2015/641415.
Zain, A. M., Shaaban, M. G., and Mahmud, H. (2010). “Immobilization of petroleum sludge incorporating Portland cement and rice husk ash.” Intern. J. Chem. Eng. Appl., Vol. 1, No. 3, 234–240, DOI: 10.7763/IJCEA.2010.V1.40.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Oh, S., Shin, W.S. Applicability of solidified/stabilized dye sludge char as a landfill cover material. KSCE J Civ Eng 21, 2573–2583 (2017). https://doi.org/10.1007/s12205-017-0064-5
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12205-017-0064-5