Abstract
The structural failure of functionally graded materials (FGMs) is mostly triggered by the micro-cracks so that the crack propagation is an important research subject. In this connection, the goal of this study is to develop a reliable numerical method for solving the crack propagation in 2-D inhomogeneous FGMs. To accomplish this goal, this paper introduces an improved crack propagation simulation method for 2-D FGMs by applying the enrichment technique to the natural element method (NEM). The global displacement field is interpolated using Laplace interpolation (LI) functions in NEM, and it is enhanced by the crack-tip singular displacement field. The stress intensity factors (SIFs) of FGMs having the varying Young’s modulus in space was computed by the modified interaction integral M(1,2), while the trajectories in crack propagation were predicted using the maximum principal stress (MPS) criterion and the effective SIF Kleqv at mode I. The present method was validated from the comparison with ANSYS and the unriched PG-NEM. It is found that the enriched NEM greatly enhances the simulation reliability of crack trajectory, such that it produces the crack trajectory close to one obtained by ANSYS. As well, it successfully predicted the remarkable variation of crack trajectories of FGM with exponentially varying elastic modulus.
Similar content being viewed by others
References
Abdelaziz HH, Meziane MA, Bousahla AA, Tounsi A, Mahmoud SR, Alwabli AS (2017) An efficient hyperbolic shear deformation theory for bending, buckling and free vibration of FGM sandwich plates with various boundary conditions. Steel and Composite Structures 25(6):693–704, DOI: https://doi.org/10.12989/scs.2017.25.6.693
Anlas G, Santare MH, Lambros J (2000) Numerical calculation of stress intensity factors in functionally graded materials. International Journal of Fracture 104:131–143, DOI: https://doi.org/10.1023/A:1007652711735
ANSYS (2019) User’s manual, version 19.0. ANSYS, Canonsburg, PA, USA
Apalak MK (2014) Functionally graded adhesively bonded joints. Review of Adhesion and Adhesive 1:56–84, DOI: https://doi.org/10.7569/RAA.2014.097301
Atkinson C, List RD (1978) Steady state crack propagation into media with spatially varying elastic properties. International Journal of Engineering Science 16:717–730
Ayhan AO (2009) Three-dimensional mixed-mode stress intensity factors for cracks in functionally graded materials using enriched finite elements. International Journal of Solids and Structures 46(3–4):796–810, DOI: https://doi.org/10.1016/j.ijsolstr.2008.09.026
Birman V, Byrd LW (2007) Modeling and analysis of functionally graded materials and structures. Applied Mechanics Review 60(5):195–216, DOI: https://doi.org/10.1115/1.2777164
Bouderba B (2018) Bending of FGM rectangular plates resting on nonuniform elastic foundations in thermal environmental using an accurate theory. Steels and Composite Structures 27(3):311–325, DOI: https://doi.org/10.12989/scs.2018.27.3.311
Cho JR (2016) Stress recovery techniques for natural element method in 2-D solid mechanics. Journal of Mechanical Science and Technology 30(11):5083–5091, DOI: https://doi.org/10.1007/s12206-016-1026-4
Cho JR (2020) Numerical study on crack propagation simulation in functionally graded materials by enriched natural element method. Journal of Mechanical Science and Technology 34(6):2487–2495, DOI: https://doi.org/10.1007/s12206-020-0524-6
Cho JR, Ha DY (2001) Averaging and finite-element discretization approaches in the numerical analysis of functionally graded materials. Materials Science Engineering A 302:187–196, DOI: https://doi.org/10.1016/S0921-5093(00)01835-9
Cho JR, Lee HW (2006) A Petrov-Galerkin natural element method securing the numerical integraiton accuracy. Journal of Mechanical Science and Technology 20(1):94–109, DOI: https://doi.org/10.1007/BF02916204
Cho JR, Lee HW (2015) Computation of 2-D mixed-mode stress intensity factors by Petrov-Galerkin natural element method. Structural Engineering and Mechanics 56(4):589–603, DOI: https://doi.org/10.12989/sem.2015.56.4.589
Cho JR, Oden JT (2000) Functionally graded material: A parametric study on thermal stress characteristics using the Crank-Nicolson-Galerkin scheme. Computer Methods in Applied Mechanics and Engineering 188:17–38, DOI: https://doi.org/10.1016/S0045-7825(99)00289-3
Cho JR, Shin SW (2004) Material composition optimization for heat resisting FGMs by artificial neural network. Composites: Part A 35(5):585–594, DOI: https://doi.org/10.1016/j.compositesa.2003.12.003
Delale F, Erdogan F (1983) The crack problem for a nonhomogeneous plane. Journal of Applied Mechanics 50:609–614, DOI: https://doi.org/10.1115/1.3167098
Dolbow JE, Gosz M (2002) On the computation of mixed-mode stress intensity factors in functionally graded materials. International Journal of Solids and Structures 39(9):2557–2574, DOI: https://doi.org/10.1016/S0020-7683(02)00114-2
Eischen JW (1987) Fracture of nonhomogeneous materials. International Journal of Fracture 34:3–22, DOI: https://doi.org/10.1007/BF00042121
Fleming M, Chu YA, Moran B, Belytschko T (1997) Enriched elementfree Galerkin methods for crack tip fields. International Journal for Numerical Methods in Engineering 40:1483–1504, DOI: https://doi.org/10.1002/(SICI)1097-0207(19970430)40:8<1483::AID-NME123>3.0.CO;2-6
Giannakopoulos AE, Suresh S, Olsson M (1995) Elastoplastic analysis of thermal cycling: Layered materials with compositional gradients. Acta Metallurgica et Materialia 43(4):1335–1354, DOI: https://doi.org/10.1016/0956-7151(94)00360-T
Gu P, Dao M, Asaro RJ (1999) A simplified method for calculating the crack tip field of functionally graded materials using the domain integral. Journal of Applied Mechanics 66(1):101–108, DOI: https://doi.org/10.1115/1.2789135
Ivanov IV, Sadowski TD, Pietras D (2013) Crack propagation in functionally graded strip under thermal shock. European Physics Journal Special Topics 222(7):1587–1595, DOI: https://doi.org/10.1140/epjst/e2013-01947-3
Jin ZH, Batra RC (1996) Some basic fracture mechanics concepts in functionally graded materials. Journal of Mechanics and Physics of Solids 44(8):1221–1235, DOI: https://doi.org/10.1016/0022-5096(96)00041-5
Kim JH, Paulino GH (2002) Finite element evaluation of mixed mode stress intensity factors in functionally graded materials. International Journal for Numerical Methods in Engineering 53:1903–1935, DOI: https://doi.org/10.1002/nme.364
Li L, Hu Y, Ling, L (2015) Flexural wave propagation in small-scaled functionally graded beams via a nonlocal strain gradient theory. Composite Structures 133:1079–1092, DOI: https://doi.org/10.1016/j.compstruct.2015.08.014
Liu KY, Long SY, Li GY (2008) A meshless local Petrov-Galerkin method for the analysis of cracks in the isotropic functionally graded material. Computer Modeling and Engineering Sciences 7(1):43–57
Mahamood RM, Akinlabi ET, Shukla M, Pityana S (2012) Functionally graded material: An overview. Proceedings of the world congress on engineering 2012 Vol III (WCE 2012), July 4–6, London, UK
Miyamoto Y, Kaysser WA, Rabin BH, Kawasaki A (2013) Functionally graded materials: Design, processing and applications. Springer, New York, NY, USA
Pant M, Singh IV, Mishra BK (2013) A novel enrichment criterion for modeling kinked cracks using element free Galerkin method. International Journal of Mechanical Sciences 68:140–149, DOI: https://doi.org/10.1016/j.ijmecsci.2013.01.008
Rao BN, Rahman S (2003) Mesh-free analysis of cracks in isotropic functionally graded materials. Engineering Fracture Mechanics 70:1–27, DOI: https://doi.org/10.1016/S0013-7944(02)00038-3
Reiter T, Dvorak GJ (1998) Micromechanical models for graded composite materials: II. Thermomechanical loading. Journal of Mechanics and Physics of Solids 46(9):1655–1673, DOI: https://doi.org/10.1016/S0022-5096(97)00039-2
Sukumar N, Moran A, Belytschko T (1998) The natural element method in solid mechanics. International Journal for Numerical Methods in Engineering 43:839–887, DOI: https://doi.org/10.1002/(SICI)1097-0207(19981115)43:5<839::AID-NME423>3.0.CO;2-R
Tilbrook MT, Moon RJ, Hoffman M (2005) Crack propagation in graded composites. Composites Science and Technolology 65(2):201–220, DOI: https://doi.org/10.1016/j.compscitech.2004.07.004
Verma JG, Kankar PK, Kumar S (2020) Crack propagation behavior in spur gear by XFEM and its influence on dynamic characteristics. In: Gupta V, Varde P, Kankar P, Joshi N (eds) Reliability and risk assessment in engineering. Springer, Singapore, 285–293, DOI: https://doi.org/10.1007/978-981-15-3746-2_26
Zhang C, Sladek J, Sladek V (2004) Crack analysis in unidirectionally and bidirectionally functionally graded materials. International Journal of Fracture 129:385–406
Acknowledgments
This work was supported by the National Research Foundation of Korea (NRF) grant funded by the Korea Government (MSIT) (2020R1A2C1100924).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Cho, JR. Crack Propagation Simulation for Metal-Ceramic FGMs by Enriched Natural Element Method. KSCE J Civ Eng 25, 2089–2096 (2021). https://doi.org/10.1007/s12205-021-1129-z
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12205-021-1129-z