Abstract
To solve the problem of bridge surface cracking caused by an uneven temperature field inside and outside the web of a concrete box structure, an automatic temperature control device applied to the beam surface of a concrete box bridge in the daytime is developed. The device, hanging on the surface of the box girder webs, consists of a radiation cooling coating and a composite shape-stabilized phase change material. With reference to a bridge in Guizhou Province, finite element analysis, short-term temperature monitoring and temperature-drop monitoring are carried out using the device. The result shows that the automatic temperature control device works well continuously. For a box girder without an automatic temperature control device, the inside and outside of the web demonstrate different sensitivities to the temperature of the external environment, with a high temperature fluctuation and a relatively high temperature stress. For a box girder with an automatic temperature control device, as the cooling coating reflects part of the solar radiation and the phase transformation of the composite shape-stabilized phase change material releases or absorbs part of the latent heat to or from the external environment, the temperature fluctuation and temperature stress of the inside and outside of the web are relatively small. When the temperature suddenly drops, the automatic temperature control device works better than under conventional weather conditions because it can reduce the external temperature by approximately 50% on the outer surface of the box girder webs.
Similar content being viewed by others
References
Atiganyanun S, Plumley JB, Han SJ, Hsu K, Cytrynbaum J, Peng TL (2018) Effective radiative cooling by paint-format microsphere-based photonic random media. ACS Photonics 2018:1181–1187, DOI: https://doi.org/10.1021/acsphotonics.7b01492
Bao H, Yan C, Wang B, Fang, X, Zhao CY, Ruan X (2017) Double-layer nanoparticle-based coatings for efficient terrestrial radiative cooling. Solar Energy Materials & Solar Cells 168:78–84, DOI: https://doi.org/10.1016/j.solmat.2017.04.020
Chang S, Yang M, Sun Y, Liu K (2019) Calculation method of early-age crack width in reinforced concrete bridge through a nonlinear fea model. KSCE Journal of Civil Engineering 23(7):3088–3096, DOI: https://doi.org/10.1007/s12205-019-2129-0
Gentle AR, Smith GB (2015) A subambient open roof surface under the mid-summer sun. Advanced Science 2(9):1500119, DOI: https://doi.org/10.1002/advs.201500119
Hawileh RA, Abu-Obeidah A, Abdalla JA, Al-Tamimi A (2015) Temperature effect on the mechanical properties of carbon, glass and carbon-glass frp laminates. Construction & Building Materials 75:342–348, DOI: https://doi.org/10.1016/j.conbuildmat.2014.11.020
Hawileh RA, Rasheed HA, Abdalla JA, Al-Tamimi AK (2014) Behavior of reinforced concrete beams strengthened with externally bonded hybrid fiber reinforced polymer systems. Materials & Design 53:972–982, DOI: https://doi.org/10.1016/j.matdes.2013.07.087
Hu MK, Pei G, Zheng RC, Xiang LJ, Ji J (2016) Preliminary manufacture and analysis of a spectral selectivity surface for both solar heating and radiative cooling. Acta Energiae Solaris Sinica 37(5):1248–1254, DOI: https://doi.org/10.3969/j.issn.0254-0096.2016.05.024 (in Chinese)
Huang Z, Ruan X (2017) Nanoparticle embedded double-layer coating for daytime radiative cooling. International Journal of Heat and Mass Transfer 104:890–896, DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2016.08.009
Kou JL, Jurado Z, Zhen C, Fan S, Minnich AJ (2017) Daytime radiative cooling using near-black infrared emitters. ACS Photonics 4(3):626–630, DOI: https://doi.org/10.1021/acsphotonics.6b00991
Kuznik F, David D, Johannes K, Roux JJ (2011) A review on phase change materials integrated in building walls. Renewable & Sustainable Energy Reviews 15(1):379–391, DOI: https://doi.org/10.1016/j.rser.2010.08.019
Lamrani B, Johannes K, Kuznik F (2021) Phase change materials integrated into building walls: An updated review. Renewable and Sustainable Energy Reviews 140, DOI: https://doi.org/10.1016/j.rser.2021.110751
Li Z, Li BR, Chen ZH, Wen B, Du XZ (2020) State of the art review on phase change thermal energy storage technology. Chemical Industry and Engineering Progress 39(12):5066–5085, DOI: https://doi.org/10.16085/j.issn.1000-6613.2020-0376 (in Chinese)
Liu Y, Liu J, Zhang N (2019) Review on solar thermal actions of bridge structures. Tumu Gongcheng Xuebao/China Civil Engineering Journal 52(5):59–78, DOI: https://doi.org/10.15951/j.tmgcxb.2019.05.006 (in Chinese)
Ma YP, Li K, Wang C, You L (2017) Analysis on filler’s modification to the property of reflective thermal insulation coating. Tongji Daxue Xuebao/Journal of Tongji University 45(2):249–255 (in Chinese)
Manfredi RP, Silva F (2020) Test methods for the characterization of polypropylene fiber reinforced concrete: A comparative analysis. KSCE Journal of Civil Engineering 24(3):856–866, DOI: https://doi.org/10.1007/s12205-020-0741-7
Mohseni I, Rashid A, Kang J (2014) Effect of intermediate diaphragm on lateral load distribution factor of multicell box-girder bridges. KSCE Journal of Civil Engineering 18(11):2128–2137, DOI: https://doi.org/10.1007/s12205-014-0148-4
Noshadi S, Sadeghi R (2019) Differential scanning calorimetry determination of solid-liquid equilibria phase diagrams for binary monocarboxylic acids solutions. Fluid Phase Equilibria 486:1–10, DOI: https://doi.org/10.1016/j.fluid.2018.12.035
Raman AP, Anoma MA, Zhu L, Rephaeli E, Fan S (2014) Passive radiative cooling below ambient air temperature under direct sunlight. Nature 515:540–544, DOI: https://doi.org/10.1038/nature13883
Rephaeli E, Raman A, Fan S (2013) Ultrabroadband photonic structures to achieve high-performance daytime radiative cooling. Nano Letters 13(4):1457–1461, DOI: https://doi.org/10.1021M4004283
Safi M, Koolivand M, Ketabdari H, Rasouli M (2019) Seismic reliability of concrete buildings considering probabilistic distribution of crack. KSCE Journal of Civil Engineering 24(1):178–186, DOI: https://doi.org/10.1007/s12205-020-0319-4
Srinivasan A, Czapla B, Mayo J, Narayanaswamy A (2016) Infrared dielectric function of polydimethylsiloxane and selective emission behavior. Applied Physics Letters 109(6):88–735, DOI: https://doi.org/10.1063/1.4961051
Su W, Darkwa J, Kokogiannakis G (2015) Review of solid-liquid phase change materials and their encapsulation technologies. Renewable and Sustainable Energy Reviews 48:373–391, DOI: https://doi.org/10.1016/j.rser.2015.04.044
Sun WC, Feng JX, Zhang ZG, Fang XM (2020) Research progress of phase change heat storage technology for passive energy conservation in buildings. Chemical Industry and Engineering Progress 39(5): 1824–1834, DOI: https://doi.org/10.16085/j.issn.1000-6613.2019-1314 (in Chinese)
Tydlitat V, Matas T, Cerny R (2014) Effect of w/c and temperature on the early-stage hydration heat development in Portland-limestone cement. Construction & Building Materials 50:140–147, DOI: https://doi.org/10.1016/j.conbuildmat.2013.09.020
Wang Y, Yuan A, Zhao Y, Liu Q, Lei J (2020) Phase change material with flexible crosslinking for thermal energy storage. Journal of Applied Polymer Science 137(13), DOI: https://doi.org/10.1002/app.48497
Zhai Y, Ma Y, David SN, Zhao D, Lou R Tan G (2017) Scalable-manufactured randomized glass-polymer hybrid metamaterial for daytime radiative cooling. Science 355(6329):1062–1066, DOI: https://doi.org/10.1126/science.aai7899
Zhang YH (2017) The most unfavorable solar temperature field and termal stress of long-span concrete box girder. MSc Thesis, Southwest jiaotong University, Chengdu, China (in Chinese)
Zhang HB (2020a) Research on composite self-regulating temperature control method of concrete box structure. MSc Thesis, Chongqing Jiaotong University, Chongqing, China (in Chinese)
Zhang YY (2020b) Research on temperature control technology of bridge structure based on surface radiation. MSc Thesis, Chongqing Jiaotong University, Chongqing, China (in Chinese)
Zhao RD, Wang YB (2016) Studies on temperature field boundary conditions for concrete box-girder bridges under solar radiation. China Journal of Highway and Transport 29(7):52–61, DOI: https://doi.org/10.19721/j.cnki.1001-7372.2016.07.007 (in Chinese)
Acknowledgments
This research is supported by the National Outstanding Youth Science Fund Project of National Natural Science Foundation of China (51425801), National Natural Science Foundation of China (51278512) and Yunnan Science and Technology Program (2017IB025).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Wang, Z., Zhou, J., Liao, L. et al. Design and Experiment of an Automatic Temperature Control Device of Composite Shape-Stabilized Phase Change Material for Concrete Box Bridges. KSCE J Civ Eng 26, 806–823 (2022). https://doi.org/10.1007/s12205-021-0561-4
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12205-021-0561-4