Abstract
The strength of a rock cut by non-persistent open joint set is controlled by complex interactions of the joint network and intact rock bridges. An extensive series of uniaxial numerical tests of the particle models are carried out under different joint fabrics and rock compression-tension strength ratios. The test results show joint dip angle is the main factor controlling the overall anisotropic strength characteristics. With joint dip angle increasing, the main failure modes successively appear as splitting failure, block rotation failure, step-path failure, planar failure, and splitting failure. Accordingly, the strength generally shows a trend of decreasing first and then increasing, and the joint dip angle corresponding to the minimum strength is biased towards 0°, usually at 15°–30°. The damage of rock bridges is mainly controlled by tensile failure, except in planar failure mode. Joint spacing has an impact on the local anisotropic strength characteristics. The joint spacing and persistence ratio jointly control the degree of penetration difficulty of the rock bridges. The compression-tension strength ratio of intact rock uniformly affects the absolute magnitude of the jointed rock strength and does not affect its anisotropic characteristics. Based on the weakening mechanism, an empirical strength formula is established to realize the practical equivalent characterization of the anisotropic weakening degrees of the non-persistent open joint set on the rock strength.
Similar content being viewed by others
References
Bahaaddini M, Sharrock G, Hebblewhite BK (2013) Numerical investigation of the effect of joint geometrical parameters on the mechanical properties of a non-persistent jointed rock mass under uniaxial compression. Computers and Geotechnics 49(20):206–225, DOI: https://doi.org/10.1016/j.compgeo.2012.10.012
Bahrani N, Kaiser PK, Valley B (2014) Distinct element method simulation of an analogue for a highly interlocked, non-persistently jointed rockmass. International Journal of Rock Mechanics and Mining Sciences 71:117–130, DOI: https://doi.org/10.1016/j.ijrmms.2014.07.005
Brady BHG, Brown ET (2013) Rock mechanics: For underground mining. Springer Science & Business Media, Berlin, Germany
Cao RH, Cao P, Fan X, Xiong XG, Lin H (2016) An experimental and numerical study on mechanical behavior of ubiquitous-joint brittle rock-like specimens under uniaxial compression. Rock Mechanics and Rock Engineering 49(11):4319–4338, DOI: https://doi.org/10.1007/s00603-016-1029-6
Chen P (2017) Effects of microparameters on macroparameters of flat-jointed bonded-particle materials and suggestions on trial-and-error method. Geotechnical and Geological Engineering 35(2):663–677, DOI: https://doi.org/10.1007/s10706-016-0132-5
Cording E, Jamil M (1997) Slide geometries on rock slopes and walls. In: Fourth South American congress on rock mechanics, ISRM, Balkema, Rotterdam, 199–221
Huang D, Cen DF, Ma GW, Huang RQ (2015a) Step-path failure of rock slopes with intermittent joints. Landslides 12(5):911–926, DOI: https://doi.org/10.1007/s10346-014-0517-6
Huang D, Wang JF, Liu S (2015b) A comprehensive study on the smooth joint model in DEM simulation of jointed rock masses. Granular Matter 17(6):775–791, DOI: https://doi.org/10.1007/s10035-015-0594-9
Ivars DM, Potyondy DO, Pierce M, Cundall PA (2008) The smooth-joint contact model. Proceedings of WCCM8-ECCOMAS, June 30–July 4, Venice, Italy
Jaeger JC (1960) Shear failure of anisotropic rocks. Geological Magazine 97(1):65–72, DOI: https://doi.org/10.1017/S0016756800061100
Jaeger JC, Cook NGW, Zimmerman R (2009) Fundamentals of rock mechanics. John Wiley & Sons, Hoboken, NJ, USA
Jennings JE (1970) A mathematical theory for the calculation of the stability of slopes in open cast mines. Planning Open Pit Mines, Proceedings, Johannesburg, AA Balkema Cape Town 21(2):87–102
Jiang Q, Su GS, Feng XT, Chen GQ, Zhang MZ, Liu C (2018) Excavation optimization and stability analysis for large underground caverns under high geostress: A case study of the chinese laxiwa project. Rock Mechanics and Rock Engineering 52:895–915, DOI: https://doi.org/10.1007/s00603-018-1605-z
Jiang Q, Yan F, Wu JY, Fan QX, Li SJ, Xu DP (2019) Grading opening and shearing deformation of deep outward-dip shear belts inside high slope: A case study. Engineering Geology 250:113–129, DOI: https://doi.org/10.1016/j.enggeo.2019.01.018
Jiang Q, Yang B, Yan F, Liu C, Shi Y, Li L (2020) New method for characterizing the shear damage of natural rock joint based on 3D engraving and 3D scanning. International Journal of Geomechanics 20(2):06019022, DOI: https://doi.org/10.1061/(ASCE)GM.1943-5622.0001575
Jin J, Cao P, Chen Y, Pu CZ, Mao DW, Fan X (2017) Influence of single flaw on the failure process and energy mechanics of rock-like material. Computers and Geotechnics 86:150–162, DOI: https://doi.org/10.1016/j.compgeo.2017.01.011
Liu G, Jiang QH, Xiong F, Zhang XB (2016) Experimental study of crack propagation and deformation failure of multiple-jointed rock mass. Rock and Soil Mechanics 37(S1):151–158, DOI: https://doi.org/10.16285/j.rsm.2016.S1.020 (in Chinese)
Liu HY, Zhang LM (2015) A damage constitutive model for rock mass with nonpersistently closed joints under uniaxial compression. Arabian Journal for Science and Engineering 40(11):3107–3117, DOI: https://doi.org/10.1007/s13369-015-1777-8
Mandl G (2005) Rock joints. Springer Berlin Heidelberg, Heidelberg, Germany
Potyondy DO (2012) A flat-jointed bonded-particle material for hard rock. 46th US rock mechanics/geomechanics symposium. American Rock Mechanics Association, June 24–27, Chicago, IL, USA
Potyondy DO (2015) The bonded-particle model as a tool for rock mechanics research and application: Current trends and future directions. Geosystem Engineering 18(1):1–28, DOI: https://doi.org/10.1080/12269328.2014.998346
Potyondy DO, Cundall PA (2004) A bonded-particle model for rock. International Journal of Rock Mechanics and Mining Sciences 41(8):1329–1364, DOI: https://doi.org/10.1016/j.ijrmms.2004.09.011
Prudencio M, Jan MVS (2007) Strength and failure modes of rock mass models with non-persistent joints. International Journal of Rock Mechanics and Mining Sciences 44(6):890–902, DOI: https://doi.org/10.1016/j.ijrmms.2007.01.005
Shemirani AB, Haeri H, Sarfarazi V, Hedayat A (2017) A review paper about experimental investigations on failure behaviour of nonpersistent joint. Geomechanics and Engineering 13(4):535–570, DOI: https://doi.org/10.12989/gae.2017.13.4.535
Vallejos JA, Suzuki K, Brzovic A, Ivars DM (2016) Application of Synthetic Rock Mass modeling to veined core-size samples. International Journal of Rock Mechanics and Mining Sciences 81:47–61, DOI: https://doi.org/10.1016/j.ijrmms.2015.11.003
Vergara MR, Jan MVS, Lorig L (2016) Numerical model for the study of the strength and failure modes of rock containing non-persistent joints. Rock Mechanics and Rock Engineering 49(4):1211–1226, DOI: https://doi.org/10.1007/s00603-015-0824-9
Wang C, Zhang C, Zhao X (2018) Application of similitude rules in calibrating microparameters of particle mechanics models. KSCE Journal of Civil Engineering 22(10):3791–3801, DOI: https://doi.org/10.1007/s12205-018-1960-z
Wittke W (2014) Rock mechanics based on an anisotropic jointed rock model (AJRM). John Wiley & Sons, Hoboken, NJ, USA
Wu SC, Xu XL (2016) A study of three intrinsic problems of the classic discrete element method using flat-joint model. Rock Mechanics and Rock Engineering 49(5):1813–1830, DOI: https://doi.org/10.1007/s00603-015-0890-z
Xu Q, Chen JY, Li J, Zhao CF, Yuan CY (2015) Study on the constitutive model for jointed rock mass. PLoS One 10(4):e0121850, DOI: https://doi.org/10.1371/journal.pone.0121850
Xu XL, Wu SC, Gao YT, Xu MF (2016) Effects of micro-structure and micro-parameters on brazilian tensile strength using flat-joint model. Rock Mechanics and Rock Engineering 49(9):1–21, DOI: https://doi.org/10.1007/s00603-016-1021-1
Xu WY, Zhang GK (2007) Study on orthotropic equivalent strength parameters of jointed rock mass. Chinese Journal of Geotechnical Engineering 29(6):806–810, DOI: https://doi.org/10.3321/j.issn:1000-4548.2007.06.003
Yan F, Pan PZ, Feng XT, Li SJ, Jiang Q (2019) A novel fast overrelaxation updating method for continuous-discontinuous cellular automaton. Applied Mathematical Modelling 66:156–174, DOI: https://doi.org/10.1016/j.apm.2018.08.025
Yang XX, Kulatilake PHSW, Jing HW, Yang SQ (2015) Numerical simulation of a jointed rock block mechanical behavior adjacent to an underground excavation and comparison with physical model test results. Tunneling and Underground Space Technology 50:129–142, DOI: https://doi.org/10.1016/j.tust.2015.07.006
Zhang XP, Liu QS, Wu SC, Tang XH (2015) Crack coalescence between two non-parallel flaws in rock-like material under uniaxial compression. Engineering Geology 199:74–90, DOI: https://doi.org/10.1016/j.enggeo.2015.10.007
Zhang Y, Zhuang X (2018) Cracking elements: A self-propagating strong discontinuity embedded approach for quasi-brittle fracture. Finite Elements in Analysis and Design 144:84–100, DOI: https://doi.org/10.1016/j.finel.2017.10.007
Zhang Y, Zhuang X (2019) Cracking elements method for dynamic brittle fracture. Theoretical and Applied Fracture Mechanics 102:1–9, DOI: https://doi.org/10.1016/j.tafmec.2018.09.015
Zhou S, Rabczuk T, Zhuang X (2018a) Phase field modeling of quasistatic and dynamic crack propagation: COMSOL implementation and case studies. Advances in Engineering Software 122:31–49, DOI: https://doi.org/10.1016/j.advengsoft.2018.03.012
Zhou S, Zhuang X, Rabczuk T (2019) Phase field modeling of brittle compressive-shear fractures in rock-like materials: A new driving force and a hybrid formulation. Computer Methods in Applied Mechanics and Engineering 355:729–752, DOI: https://doi.org/10.1016/j.cma.2019.06.021
Zhou S, Zhuang X, Zhu H, Rabczuk T (2018b) Phase field modelling of crack propagation, branching and coalescence in rocks. Theoretical and Applied Fracture Mechanics 96:174–192, DOI: https://doi.org/10.1016/j.tafmec.2018.04.011
Zhu X, Liu W, He X (2017) The investigation of rock indentation simulation based on discrete element method. KSCE Journal of Civil Engineering 21(4):1201–1212, DOI: https://doi.org/10.1007/s12205-016-0033-4
Acknowledgements
The authors gratefully acknowledge the financial supports from Open Research Fund of State Key Laboratory of Geomechanics and Geotechnical Engineering, Institute of Rock and Soil Mechanics, Chinese Academy of Sciences, Grant NO. Z018015, National Natural Science Foundation of China, Grant No. 51779251, Scientific Research Staring Fund of Hainan University, Grant No. KYQD(2R)1973.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Cui, J., Jiang, Q., Li, S. et al. Numerical Study of Anisotropic Weakening Mechanism and Degree of Non-Persistent Open Joint Set on Rock Strength with Particle Flow Code. KSCE J Civ Eng 24, 988–1009 (2020). https://doi.org/10.1007/s12205-020-1482-3
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12205-020-1482-3