Skip to main content
Log in

Study on deformation behavior at intersection of adit and major tunnel in railway

  • Tunnel Engineering
  • Published:
KSCE Journal of Civil Engineering Aims and scope

Abstract

Behavior of rock mass in the intersection between adit and major tunnel is a complicated three-dimensional problem, the increasing support load and additional tunnel deformation may endanger tunnel stability during construction. To understand the deformation behavior of rock mass in the intersection, a 3D numerical analysis was conducted. Comparing the monitoring data, the distribution of the plastic zone, the extrusion displacement of working face and the deformation of the sidewall in the adit and major tunnel were studied. Following analysis results, the distribution and potential influenced area of the intersection in the adit and major tunnel were analyzed. The principle of detection and reinforcement in the intersection were also discussed.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Similar content being viewed by others

References

  • Budarapu, P. R., Narayana, T. S. S., Rammohan, B., and Rabczuk, T. (2015). “Directionality of sound radiation from rectangular panels.” Applied Acoustics, Vol. 89, pp. 128–140, DOI: 10.1016/j.apacoust. 2014.09.006.

    Article  Google Scholar 

  • Budarapu, P. R., Sudhir Sastry, Y. B., Javvaji, B., and Mahapatra, D. R. (2014). “Vibration analysis of multi-walled carbon nanotubes embedded in elastic medium.” Frontiers of Structural and Civil Engineering, Vol. 8, No. 2, pp. 151–159, DOI: 10.1007/s11709-014-0247-9.

    Article  Google Scholar 

  • Budarapu, P. R., Sudhir Sastry, Y. B., Natarajan, R. (2016). “Design concepts of an aircraft wing: Composite and morphing airfoil with auxetic structures.” Frontiers of Structural and Civil Engineering, pp. 1–15, DOI: 10.1007/s11709-016-0352-z.

    Google Scholar 

  • Cui, Z. D., Liu, D. A., and Wu, F. Q. (2014). “Influence of dip directions on the main deformation region of layered rock around tunnels.” Bulletin of Engineering Geology and the Environment, Vol. 73, No. 2, pp. 441–450, DOI: 10.1007/s10064-013-0511-6.

    Article  Google Scholar 

  • Daming, L. I. N., Yanjun, S. H. A. N. G., and Kan, L. I. U. (2012). “Stress and displacement analysis of surround rock in Y-shape tunnel.” Chinese Journal of Underground Space and Engineering, Vol. 6, pp. 47–52.

    Google Scholar 

  • Eisenberg, J. and Amusin, B. (2010). “Design methodology for intersection of underground openings.” Rock Mechanics in Civil and Environmental Engineering, pp. 383–386.

    Google Scholar 

  • Guo, Z. B., Shi, J. J., Wang, J., Cai, F., and Wang, F. Q. (2010). “Doubledirectional control bolt support technology and engineering application at large span Y-type intersections in deep coal mines.” Mining Science and Technology, Vol. 20, No. 2, pp. 254–259, DOI: 10.1016/S1674-5264(09)60193-9.

    Google Scholar 

  • Hsiao, F. Y., Wang, C. L., and Chern, J. C. (2009). “Numerical simulation of rock deformation for support design in tunnel intersection area.” Tunnelling and Underground Space Technology, Vol. 24, No. 1, pp. 14–21, DOI: 10.1016/j.tust.2008.01.003.

    Article  Google Scholar 

  • Jun, Z. H. A. N. G. (2013). “Analysis on Construction Influence at Intersection of Subway Tunnel and Existing Air-defense Tunnel in Same Horizontal Plane.” Subgrade Engineering, Vol. 4, pp. 32–37.

    Google Scholar 

  • Li, G. F., He, M. C., Zhang, G. F., and Tao, Z. G. (2010). “Deformation mechanism and excavation process of large span intersection within deep soft rock roadway.” Mining Science and Technology, Vol. 20, pp. 28–34, DOI: 10.1016/S1674-5264(09)60156-3.

    Google Scholar 

  • Li, Z. J., Zhao, X. L., and Zhang, Y. (2011). “The coupling support technology for y style large span intersection in deep soft rock roadway.” Advanced Materials Research, Vol. 199, pp. 1773–1776, DOI: 10.4028/www.scientific.net/AMR.199-200.1773.

    Google Scholar 

  • Lin, P., Zhou, Y. N., Liu, Y. N., and Wang, C. (2013). “Reinforcement design and stability analysis for large-span tailrace bifurcated tunnels with irregular geometry.” Tunnelling and Underground Space Technology, Vol. 38, pp. 189–204, DOI: 10.1016/j.tust.2013. 07.011.

    Article  Google Scholar 

  • Nonomura, S., Kimura, H., Nakamura, J., and Tamura, S. (2004). “Design and construction of a tunnel intersection area with special structure.” Tunnelling and Underground Space Technology, WTC, G13.

    Google Scholar 

  • Pant, B. (1971). “Analysis and design of pressure tunnel intersection.” Indian Society of Engineering Geology, Tunnelling Seminar, Part I.

    Google Scholar 

  • Riely, W. F. (1964). “Stress at tunnel intersections.” J. Eng. Mech. Div., Proc. ASCE, 96, Part I.

    Google Scholar 

  • Sharifzadeh, M., Kolivand, F., Ghorbani, M., and Yasrobi, S. (2013). “Design of sequential excavation method for large span urban tunnels in soft ground-Niayesh tunnel.” Tunnelling and Underground Space Technology, Vol. 35, pp. 178–188, DOI: 10.1016/j.tust.2013. 01.002.

    Article  Google Scholar 

  • Sjöberg, J., Perman, F., Leander, M., and Saiang, D. (2014). “Threedimensional analysis of tunnel intersections for a train tunnel under Stockholm.” Silicon, Germanium, and Their Alloys: Growth, Defects, Impurities, and Nanocrystals, 39.

    Google Scholar 

  • Sudhir Sastry, Y. B., Budarapu, P. R., Krishna, Y., and Devaraj, S. (2014). “Studies on ballistic impact of the composite panels.” Theoretical and Applied Fracture Mechanics, Vol. 72, pp. 2–12, DOI: 10.1016/j.tafmec.2014.07.010.

    Article  Google Scholar 

  • Sudhir Sastry, Y. B., Budarapu, P. R., Madhavi, N., and Krishna, Y. (2015a). “Buckling analysis of thin wall stiffened composite panels.” Computational Materials Science, Vol. 96B, pp. 459–471, DOI: 10.1016/j.commatsci.2014.06.007.

    Article  Google Scholar 

  • Sudhir Sastry, Y. B., Krishna, Y., and Budarapu, P. R. (2015b). “Parametric studies on buckling of thin walled channel beams.” Computational Materials Science, Vol. 96, pp. 416–424, DOI: 10.1016/j.commatsci.2014.07.058.

    Article  Google Scholar 

  • Thareja, D. V., NataRajan, R., and Madhavan, K. (1980). “Structure analysis and design of bifurcating tunnels.” Water Power Dam Constr, Vol. 32, pp. 42–46.

    Google Scholar 

  • TZ 204-2008 (2008). Chinese Railway Engineering Construction Technical Guide.

    Google Scholar 

  • Chen, Y. C. and Chang, M. C. (2000). “Study of the deformation behavior and lining stresses of horizontal tunnel intersection during excavation numerical investigation.” J. Chin. Inst. Civil Hydraul. Eng., Vol. 12, No. 3, pp. 487–497.

    MathSciNet  Google Scholar 

  • Chen, C. N., Chen, J. S., and Lu, E. (2002). “The mechanical behavior of 45° tunnel intersection inducing by construction through various rock masses.” J. Chin. Inst. Civil Hydraul. Eng., Vol. 14, No. 1, pp. 159–165.

    Google Scholar 

  • TB10121-2007 (2008). Chinese Technical Code for Monitoring Measurement of Railway Tunnel.

    Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Hong-liang Liu.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Liu, Hl., Li, Sc., Li, Lp. et al. Study on deformation behavior at intersection of adit and major tunnel in railway. KSCE J Civ Eng 21, 2459–2466 (2017). https://doi.org/10.1007/s12205-017-2128-y

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s12205-017-2128-y

Keywords

Navigation