Abstract
In this paper, an integrated solar heat pipe wall space heating system, employing double glazed heat pipe evacuated tube solar collector and forced convective heat transfer condenser, is introduced. Thermal performance of the heat pipe solar collector is studied and a numerical model is developed to investigate the thermal efficiency of the system, the inlet and outlet air temperatures and heat pipe temperature. Furthermore, the system performance is evaluated based on exergy efficiency. In order to verify the precision of the developed model, the numerical results are compared with experimental data. Parametric sensitivity for design features and material associated with the heat pipe, collector cover and insulation is evaluated to provide a combination with higher thermal performance. Simulation results show that applying a solar collector with more than 30 heat pipes is not efficient. The rate of increasing in temperature of air becomes negligible after 30 heat pipes and the trend of the thermal efficiency is descending with increasing heat pipes. The results also indicate that at a cold winter day of January, the proposed system with a 20 heat pipe collector shows maximum energy and exergy efficiency of 56.8% and 7.2%, which can afford warm air up to 30°C. At the end, the capability of the proposed system to meet the heating demand of a building is investigated. It is concluded that the best method to reach a higher thermal covered area is to apply parallel collectors.
Similar content being viewed by others
References
Dunn P D and Reay D A 1982 Heat pipe, 3rd edition, New York: Pergamon Press
Faghri A 1995 Heat pipe science and technology. London: Taylor & Francis
Corliss J M 1979 Evaluation of heat pipe application for passive solar systems. DOE Report Department of Energy, Washington DC
Rice W J 1984 Performance of passive and hybrid solar heating systems. Int. J. Ambient Energy 5(4): 171–186
Albanese M V, Robinson B S, Brehob E G and Sharp M K 2012 Simulated and experimental performance of a heat pipe assisted solar wall. Sol. Energy 86(5): 1552–1562
Robinson B S, Chmielewski N E, Knox-Kelecy A, Brehob E G and Sharp M K 2013 Heating season performance of a full-scale heat pipe assisted solar wall. Sol. Energy 87: 76–83
Du B, Hu E and Kolhe M 2013 An experimental platform for heat pipe solar collector testing. Renew. Sustain. Energy Rev. 17: 119–125
Varga S, Oliveira A C and Afonso C F 2002 Characterization of thermal diode panels for use in the cooling season in buildings. Energy Build. 34(3): 227–235
Chan H Y, Riffat S B and Zhu J 2010 Review of passive solar heating and cooling technologies. Renew. Sustain. Energy Rev. 14(2): 781–789
Rosen M A and Dincer I 2003 Exergy methods for assessing and comparing thermal storage systems. Int. J. Energy Res. 27(4): 415–430
Szargut J, Morris D R and Stewart F R 1998 Exergy analysis of thermal, chemical and metallurgical processes. USA: Edwards Brothers Inc
Akpinar E K and Koçyiğit F 2010 Energy and exergy analysis of a new flat-plate solar air heater having different obstacles on absorber plates. Appl. Energy 87(11): 3438–3450
Bouadila S, Lazaar M, Skouri S, Kooli S and Farhat A 2014 Energy and exergy analysis of a new solar air heater with latent storage energy. Int. J. Hydrogen Energy 39(27): 15266–15274
Gunerhan H and Hepbasli A 2007 Exergetic modeling and performance evaluation of solar water heating systems for building applications. Energy Build. 39(5): 509–516
Bayrak F, Oztop H F and Hepbasli A 2013 Energy and exergy analyses of porous baffles inserted solar air heaters for building applications. Energy Build. 57: 338–345
Wang Z, Duan Z, Zhao X and Chen M 2012 Dynamic performance of a facade-based solar loop heat pipe water heating system. J. Sol. Energy 86(5): 1632–1647
Riffat S B, Zhao X and Doherty P S 2005 Developing a theoretical model to investigate thermal performance of a thin membrane heat-pipe solar collector. Appl. Therm. Eng. 25 (5–6): 899–915
Lienhard J H IV and Lienhard J H V 2008 DOE fundamentals handbook: thermodynamics, heat transfer, and fluid flow. Washington, DC: US Department of Energy
Incropera F and DeWitt D 2002 Introduction to heat transfer, 5th edition, New York: Wiley
Azad E 2008 Theoretical and experimental investigation of heat pipe solar collector. Exp. Therm. Fluid Sci. 32(8): 1666–1672
Bienert B 1973 Heat pipes for solar collectors. In: Proceedings of the 1st international heat pipe conference, Stuttgart, Germany
Hartley A 2006 Fuel poverty. Birmingham: West Midlands Public Health Observatory
Tabatabaee M H 2008 Construction installation calculation. Tehran: Kelid Amoozesh pub
Singh N, Kaushik S C and Misra R D 2000 Exergetic analysis of a solar thermal power system. Renew. Energy 19(1–2): 135–143
Petela R 2003 Exergy of undiluted thermal radiation. Sol. Energy 74(6): 469–488
Peters Ca 2001 Statistics for analysis of experimental data. Champaign, IL: Environmental Engineering Processes Laboratory Manual, AEESP
Trnsys 16.00.0037, 2005 Weather data reading and processing
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Daghigh, R., Shafieian, A. Energy and exergy evaluation of an integrated solar heat pipe wall system for space heating. Sādhanā 41, 877–886 (2016). https://doi.org/10.1007/s12046-016-0517-4
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12046-016-0517-4