Abstract
In this study is proposed a pre-concentration procedure using molecular imprinted polymer for the determination of copper in food samples. The copper imprinted polymer was prepared by free radical solution polymerization in a tube containing copper, morin, 4-vinylpyridine as a functional monomer, ethyleneglycoldimethacrylate as a cross-linking monomer, and 2,2′-azobisisobutyronitrile as an initiator. The polymer particles synthesized both before and after leaching have been characterized by infrared and X-ray diffraction studies. The effect of different variables such as pH of solution, adsorption and desorption time, type, and least amount of eluent for elution of the complex of polymer was evaluated. Extraction efficiencies more than 99% were obtained by elution of the polymer with 10 mL of 0.5 mol L−1 EDTA. The detection limit of the proposed procedure was 0.14 μg L−1. The method was applied to the determination of copper in food real samples.
Similar content being viewed by others
References
Shams E, Babaei A, Soltaninezhad M, Soltaninezhad M (2004) Simultaneous determination of copper, zinc and lead by adsorptive stripping voltammetry in the presence of morin. Anal Chim Acta 501:119–124
WHO technical report series, evaluation of certain food additives and contaminants, WHO, Geneva, 1982, No. 683
Ferreira HS, Santos ACN, Portugal LA, Costa ACS (2008) Pre-concentration procedure for determination of copper and zinc in food samples by sequential multi-element flame atomic absorption spectrometry. Talanta 77:73–76
Hassanien MM, Sherbini KSAE (2006) Synthesis and characterization of morin-functionalized silica gel for the enrichment of some precious metal ions. Talanta 68:1550–1559
Puoci F, Garreffa C, Iemma F, Muzzalupo R, Spizziri UG, Picci N (2005) Molecularly imprinted solid phase extraction for detection of Sudan I in food matrices. Food Chemistry 93:349–353
Caro E, Marce RM, Cormack P, Sherrington D, Borrull F (2004) A new molecularly imprinted polymer for the selective extraction of naproxen from urine samples by solid-phase extraction. J Chromatogr B 813:137–143
Chianella I, Piletsky SA, Tothill IE, Chem B, Turner APF (2003) MIP-based solid phase extraction cartridges combined with MIP-based sensors for the detection of microcystin-LR. Biosensors and Bioelectronics 18:119–127
Baggiani C, Giovannoli C, Anfossi L, Tozzi C (2001) Molecularly imprinted solid-phase extraction sorbent for the clean-up of chlorinated phenoxyacids from aqueous samples. J Chromatogr A 938:35–44
Brambilla G, Fiori M, Rizzo B, Crescenzi V, Masci G (2001) Use of molecularly imprinted polymers in the solid-phase extraction of clenbuterol from animal feeds and biological matrices. J Chromatogr B 759:27–32
Widstrand C, Larsson F, Fiori M, Civitareale C, Mirante S, Brambilla G (2004) Evaluation of MISPE for the multi-residue extraction of β-agonists from calves urine. J Chromatogr B 804:85–91
Khajeh M, Yamini Y, Ghasemi E, Fasihi J, Shamsipur M (2007) Imprinted polymer particles for selenium uptake: synthesis, characterization and analytical applications. Anal Chim Acta 581:208–213
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Khajeh, M., Sanchooli, E. Development of a Selective Molecularly Imprinted Polymer-Based Solid-Phase Extraction for Copper from Food Samples. Biol Trace Elem Res 135, 325–333 (2010). https://doi.org/10.1007/s12011-009-8481-z
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12011-009-8481-z