Skip to main content
Log in

Optimized methods for multi-projector display correction

  • Original Paper
  • Published:
International Journal on Interactive Design and Manufacturing (IJIDeM) Aims and scope Submit manuscript

Abstract

Multi-projector displays are commonly used for a wide range of applications such as virtual reality systems, simulators or data visualization where a high resolution image over a large projection surface is required. Such systems are cheap for the resolutions they can provide, can be configured to project images on almost any kind of screen shapes and are easily scalable, but in order to provide a seamless image with no photometric discontinuities they require a precise geometric and colour correction. In this paper, we propose a series of optimization techniques for large projection displays which make the adjustment procedure simpler and faster. Calibration method uses commercial off-the-shelf equipment such as a webcam and an intermediate performance graphics card. Multiple views are used if one camera image can’t cover the entire display with enough resolution. The effect of these optimizations in the calibration of a simulated display formed by 48 projectors are shown.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Similar content being viewed by others

References

  1. Majumder A., Brown M.S.: Practical Multi-Projector Display Design. A.K. Peters, Ltd, Natick (2007)

    Google Scholar 

  2. Chen, H., Sukthankar, R., Wallace, G., Li, K.: Scalable alignment of large-format multi-projector displays using camera homography trees. In: Proceedings of the Conference on Visualization ’02 (VIS ’02), pp. 339–346. IEEE Computer Society, Washington (2002)

  3. Brown M., Majumder A., Yang R.: Camera-based calibration techniques for seamless multiprojector displays. IEEE Trans. Vis. Comput. Graphics 11(2), 193–206 (2005). doi:10.1109/TVCG.2005.27

    Article  Google Scholar 

  4. Hereld, M., Judson, I.R., Stevens, R.: Dottytoto: a measurement engine for aligning multi-projector display systems. Argonne National Laboratory. Preprint ANL/MCS-P958-0502 (2002)

  5. Majumder, A.: Properties of color variation across multi-projector displays. In: Proceedings of SID Eurodisplay, pp. 807–810 (2002)

  6. Majumder, A., Stevens, R.: LAM: luminance attenuation map for photometric uniformity in projection based displays. In: Proceedings of the ACM Symposium on Virtual Reality Software and Technology (VRST ’02), pp. 147–154. ACM, New York (2002). doi:10.1145/585740.585765

  7. Wallace, G., Chen, H., Li, K.: Color gamut matching for tiled display walls. In: Proceedings of the Workshop on Virtual Environments 2003 (EGVE ’03). ACM, New York, 293–302 (2003). doi:10.1145/769953.769988

  8. Stone, M.C.: Color balancing experimental projection displays. In: 9th IS&T/SID Color Imaging Conference, pp. 342–347 (2001)

  9. Sajadi B., Lazarov M., Gopi M., Majumder A.: Color seamlessness in multi-projector displays using constrained gamut morphing. IEEE Trans. Vis. Comput. Graphics 15(6), 1317–1326 (2009). doi:10.1109/TVCG.2009.124

    Article  Google Scholar 

  10. Pagani A., Stricker D.: Spatially uniform colors for projectors and tiled displays. J. Soc. Inf. Display 15(9), 679 (2007) ISSN:10710922

    Article  Google Scholar 

  11. Amiri, K., Yang, S.-H., Kurdahi, F., El Zarki, M., Majumder, A.: Collaborative video playback on a federation of tiled mobile projectors enabled by visual feedback. In: Proceedings of the 3rd Multimedia Systems Conference (MMSys ’12), pp. 113–118. ACM, New York (2012). doi:10.1145/2155555.2155575

  12. Horn, E., Kiryati, N.: Toward optimal structured light patterns. In: Proceedings of the International Conference on Recent Advances in 3D Digital Imaging and Modeling (NRC ’97). IEEE Computer Society, Washington (1997)

  13. Bradski, G., Kaehler, A.: Learning OpenCV. Computer Vision with the OpenCV Library. O’Reilly Media (2008)

  14. Zhang Z.: A flexible new technique for camera calibration. IEEE Trans. Pattern Anal. Mach. Intell. 22(11), 1330–1334 (2000). doi:10.1109/34.888718

    Article  Google Scholar 

  15. Debevec, P.E., Malik, J.: Recovering high dynamic range radiance maps from photographs. In: Proceedings of the 24th Annual Conference on Computer Graphics and Interactive Techniques (SIGGRAPH ’97), pp. 369–378. ACM Press/Addison-Wesley, New York (1997)

  16. Majumder, A.: A practical framework to achieve perceptually seamless multi-projector displays. Ph.D. Dissertation, The University of North Carolina at Chapel Hill (2003)

  17. Harville, M., Culbertson, B., Sobel, I., Gelb, D., Fitzhugh, A., Tanguay, D.: Practical methods for geometric and photometric correction of tiled projector. In: Proceedings of the 2006 Conference on Computer Vision and Pattern Recognition Workshop (CVPRW ’06). IEEE Computer Society, Washington (2006). doi:10.1109/CVPRW.2006.161

  18. Humphreys, G., Houston, M., Ng, R., Frank, R., Ahern, S., Kirchner, P.D., Klosowski, J.T.: Chromium: a stream-processing framework for interactive rendering on clusters. ACM Trans. Graph. 21(3), 693–702 (2002). doi:10.1145/566654.566639

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to C. Zoido.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Zoido, C., Maroto, J., Romero, G. et al. Optimized methods for multi-projector display correction. Int J Interact Des Manuf 7, 13–25 (2013). https://doi.org/10.1007/s12008-012-0161-0

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s12008-012-0161-0

Keywords

Navigation