Abstract
Spin coating is used by several industries to apply thin but uniform liquid films to a given substrate. While this method produces very uniform coatings over much of the substrate, near the periphery of the substrate, defects in the coating, sometimes referred to as edge beading, often occur. This paper explores the usage of a two-axis spin coating technology that leads to a more uniform film thickness near the edge of the substrate. By rotating the substrate on an axis parallel to the substrate, centrifugal forces are generated that act both normal and parallel to the substrate. These forces are known as elevated gravity and act to even out any existing coating irregularities and also to drain liquid toward the edge of the substrate. This study investigates the effect of elevated gravity on the coating dynamics of a photoresist liquid film on a circular silicon wafer. Using lubrication theory, we derive a modified evolution equation that includes the effects of elevated gravity. We solve this equation numerically using implicit finite differences. Four layers of a photoresist film are spin coated on 3-inch circular wafers using a two-axes spin technology under various elevated gravity conditions. The thickness of the dried coating layers near the periphery of the substrate is measured using a SEM device. Both the experiments and the simulations show that edge beading defects can be substantially reduced for the 500g elevated gravity case compared to the normal 1g gravity case.
Similar content being viewed by others
References
Emslie, AG, Bonner, FT, Peck, LG, “Flow of a Viscous Liquid on a Rotating Disk.” J. Appl. Phys., 29 (5) 858–862 (1958)
Acrivos, A, Shah, MJ, Petersen, EE, “On the Flow of a Non-Newtonian Liquid on a Rotating Disk.” J. Appl. Phys., 31 963–968 (1984)
Lawrence, CJ, “The Mechanics of Spin Coating of Polymer Films.” Phys. Fluids, 31 (10) 2786–2795 (1988)
Jenekhe, SA, Schuldt, SB, “Coating Flow of Non–Newtonian Fluids on a Flat Rotating Disk.” Ind. Eng. Chem. Fundam., 23 432–436 (1984)
Meyerhofer, D, “Characteristics of Resist Films Produced by Spinning.” J. Appl. Phys., 49 (7) 3993–3997 (1978)
Bornside, DE, Macosko, CW, Scriven, LE, “Spin Coating: One-Dimensional Model.” J. Appl. Phys., 66 (11) 5185–5193 (1989)
Stillwagon, LE, Larson, RG, “Leveling of Thin Films Over Uneven Substrates During Spin Coating.” Phys. Fluids A Fluid Dyn., 2 (11) 1937–1944 (1990)
Shiratori, S, Kubokawa, T, “Double-Peaked Edge-Bead In Drying Film of Solvent-Resin Mixtures.” Phys. Fluids, 27 (10) 102105 (2015)
Arscott, S, “The Limits of Edge Bead Planarization and Surface Levelling in Spin-Coated Liquid Films.” J. Micromech. Microeng., 30 (2) 025003 (2020)
Chaplick, V, Degenkolb, E, Elliott, D, Harte, K, Millman, R, Jr., Tardif, M, "Analysis of Photoresist Edge Bead Removal Using Laser Light and Gas." In: Mircea, VD, Will, C (eds.) Optical Microlithography XXIII, vol. 7640, p. 76403J. International Society for Optics and Photonics, SPIE (2010)
Lee, H, Lee, K, Ahn, B, Xu, J, Xu, L, Kwang, W, “A New Fabrication Process for Uniform su-8 thick Photoresist Structures by Simultaneously Removing Edge Bead and Air Bubbles.” J. Micromech. Microeng., 21 (12) 125006 (2011)
Yan, Y, Zhou, P, Zhang, S-X, Guo, X-G, Guo, D-M, “Effect of Substrate Curvature on Thickness Distribution of Polydimethylsiloxane Thin Film in Spin Coating Process.” Chin. Phys. B, 27 (6) 068104 (2018)
Park, HW, “Simple and Cost-Effective Method for Edge Bead Removal by Using a Taping Method.” J. Korean Phys. Soc., 73 (10) 1473–1478 (2018)
Mahmoodi, S, Guoqing, H, Khajavi, MK, “Two-Dimensional Spin Coating with a Vertical Centrifugal Force and the Effect of Artificial Gravity on Surface Leveling.” J. Coat. Technol. Res., 13 (6) 1123–1137 (2016)
Mahmoodi, S, Guoqing, H, Wang, L, Nourikhajavi, M, “Two-Dimensional Spin Coating Technology and the Effect of Artificial Gravity on Film’s Air-Bubbling.” Microsyst. Technol., 23 (5) 1585–1594 (2017)
Mahmoodi, S, Hamedi, P, Zhong, S, Weidner, D, Wei, L, “Compressibility and Crystalline Structures of PVDF Membranes Under Elevated Gravity Acceleration by Two-Axis Spin Coating Technology.” Phys. Chem. Chem. Phys., 24 (29) 17577–17592 (2022)
Mahmoodi, S, Hassand, DA, Hojjati-Najafabadie, A, Li, W, Liao, L, Moshayedi, AJ, Huanga, X, Khajavif, MN, “Quality Enhancement of Copper Oxide Thin Film Synthesized Under Elevated Gravity Acceleration by Two-Axis Spin Coating.” Ceram. Int., 46 (6) 7421–7429 (2020)
Weidner, DE, “Analysis of the Flow of a Thin Liquid Film on the Surface of a Rotating, Curved, Axisymmetric Substrate.” Phys. Flids, 30 082110 (2018)
Weidner, DE, “Erratum: Analysis of the Flow of a Thin Liquid Film on the Surface of a Rotating, Curved, Axisymmetric Substrate.” Phys. Fluids, 31 109902 (2019)
Schwartz, LW, Weidner, DE, “Modeling of Coating Flows on Curved Surfaces.” J. Eng. Math., 29 (1) 91–103 (1995)
Probstein, RF, Physicochemical Hydrodynamics, 2nd edn. Wiley, New York (1994)
Funding
The authors used no outside funding
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors used no competing interests to declare that are relevant to the content of this article.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Mahmoodi, S., Weidner, D.E. Reduction in edge beading defects using two-axis spin coating technology: an analytical, numerical, and experimental study. J Coat Technol Res 20, 1759–1771 (2023). https://doi.org/10.1007/s11998-023-00779-2
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11998-023-00779-2