Skip to main content
Log in

The particle size effect of MALPB-DEA dispersions on their anticorrosion performances as waterborne coatings on galvanized sheet

  • Published:
Journal of Coatings Technology and Research Aims and scope Submit manuscript

Abstract

Maleic anhydride-g-liquid polybutadiene (MALPB) dispersions were prepared by chemical modification with diethanolamine (DEA) during direct polymer emulsification, and their anticorrosion performances on galvanized sheet were found to be strongly dependent on their particle size and distribution with the variation of DEA. The dispersion containing DEA to maleic anhydride at molar ratio of 2:1 exhibited much smaller particle size and narrower size distribution than that containing DEA to maleic anhydride at molar ratio of 1:1, as measured by a laser diffraction particle size analyzer. A more compact organic layer was supposed to be formed by the dispersion composed of smaller size and narrower size distribution particles on the galvanized sheet, which exhibited better anticorrosive properties. This compact layer slowed down the electrolyte penetration onto the metal surface such that the life span of the metal could be prolonged, which was reflected in the increase in corrosion potential as measured by DC polarization, higher impedance during immersion in 3.5 wt% NaCl solution as measured by electrochemical impedance spectroscopy (EIS), and improved durability in harsh environment as observed by images after salt spray tests.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6

Similar content being viewed by others

References

  1. Rossenbeck, B, Ebbinghaus, P, Stratmann, M, Grundmeier, G, “Corrosion Protection of Zn-Phosphate Containing Water Borne Dispersion Coatings on Steel: Part 1: Design and Analysis of Model Water Based Latex Films on Iron Substrates.” Corr. Sci., 48 (11) 3703–3715 (2006)

    Article  CAS  Google Scholar 

  2. Hammouda, N, Boudinar, Y, Touiker, M, Belmokre, K, “Study of the Behavior of an Organic Coating Applied on the Storage Reservoirs of Oil in a Medium of 3% NaCl Solution and in Marine Environment.” Mater. Corr., 57 (4) 338–344 (2006)

    Article  CAS  Google Scholar 

  3. Sorensen, PA, Kiil, S, Dam-Johansen, K, Weinell, CE, “Anticorrosive Coatings: a Review.” J. Coat. Technol. Res., 6 (2) 135–176 (2009)

    Article  CAS  Google Scholar 

  4. Esser, RJ, Devona, JE, Setzke, DE, Wagemans, L, “Water Based Crosslinkable Surface Coatings.” Prog. Org. Coat., 36 (1–2) 45–52 (1999)

    Article  CAS  Google Scholar 

  5. Rink, HP, Mayer, B, “Water-Based Coatings for Automotive Refinishing.” Prog. Org. Coat., 34 (1–4) 175–180 (1997)

    Article  Google Scholar 

  6. Winnik, MA, “The Formation and Properties of Latex Films.” In: Lovell, PA, El-Aasser, MS (eds.) Emulsion Polymerisation and Emulsion Polymers, pp. 467–515. Wiley, Chichester, UK (1997)

  7. Khan, AK, Ray, BC, Dolui, SK, “Preparation of Core–Shell Emulsion Polymer and Optimization of Shell Composition with Respect to Opacity of Paint Film.” Prog. Org. Coat., 62 (1) 65–70 (2008)

    Article  CAS  Google Scholar 

  8. Reyes, Y, Rodrıguez, FJ, del Rio, JM, Corea, M, Vazquez, F, “Characterisation of an Anticorrosive Phosphated Surfactant and Its Use in Water-Borne Coatings.” Prog. Org. Coat., 52 (4) 366–371 (2005)

    Article  CAS  Google Scholar 

  9. Blasko, JE, Calhoun, GC, Esser, RJ, Karabetsos, RE, Krawczak, DT, Giddings, CS, Trumbo, DL, “Waterborne Polymers for Use in Thermoset Coatings: A New Hydrolysis Resistant Monomer as a Replacement for Acetoacetoxyethyl Methacrylate.” J. Coat. Technol., 74 (925) 83–87 (2002)

    Article  CAS  Google Scholar 

  10. Deng, XH, Liu, F, Luo, YF, Chen, YJ, Jia, DM, “Preparation, Structure and Properties of Comb-Branched Waterborne Polyurethane/OMMT Nanocomposites.” Prog. Org. Coat., 60 (1) 11–16 (2007)

    Article  CAS  Google Scholar 

  11. Francis, MJ, Boyson, TK, Pashley, RM, “Oil Droplet Size Manipulation Applied to Surfactant-Free Emulsion Polymerization.” Colloids Surf. A: Physicochem. Eng. Aspects, 328 (1–3) 44–51 (2008)

    Article  CAS  Google Scholar 

  12. Moayed, SH, Fatemi, S, Pourmahdian, S, “Synthesis of a Latex with Bimodal Particle Size Distribution for Coating Applications Using Acrylic Monomers.” Prog. Org. Coat., 60 (4) 312–319 (2007)

    Article  CAS  Google Scholar 

  13. Tang, J, Wang, J, He, Y, Tong, Z, Shen, Z, Li, X, Li, B, “Corrosion Protection of Galvanized Sheet by Maleic Anhydride-g-Liquid Polybutadiene Environmental Friendly Coatings.” Prog. Org. Coat., 63 (2) 195–200 (2008)

    Article  CAS  Google Scholar 

  14. Zhao, Q, Li, X, Gao, J, “Aging of Ethylene–Propylene–Diene Monomer (EPDM) in Artificial Weathering Environment.” Polym. Degrad. Stab., 92 (10) 1841–1846 (2007)

    Article  CAS  Google Scholar 

  15. Faghihi, K, “New Optically Active Poly(amide-imide)s Based on N,N′(Pyromellitoyl)-bis-L-amino acid and 1,3-Bis(4-aminophenoxy) Propane: Synthesis and Characterization.” J. Appl. Polym. Sci., 109 (1) 74–81 (2008)

    Article  CAS  Google Scholar 

  16. Sclavons, M, Laurent, M, Devaux, J, Carlier, V, “Maleic Anhydride-Grafted Polypropylene: FTIR Study of a Model Polymer Grafted by Ene-Reaction.” Polymer, 46 (19) 8062–8067 (2005)

    Article  CAS  Google Scholar 

  17. Monticelli, O, Fina, A, Ullah, A, Waghmare, P, “Preparation, Characterization, and Properties of Novel PSMA-POSS Systems by Reactive Blending.” Macromolecules, 42 (17) 6614–6623 (2009)

    Article  CAS  Google Scholar 

  18. Zhang, F, Yu, C, Zhu, X, Wei, C, “The Effect of Initiator System on Acrylate Emulsion Copolymerization with Higher Hydroxyl Monomer Content.” Polym. Adv. Technol., 17 (7–8) 608–611 (2006)

    Article  CAS  Google Scholar 

  19. Zucchi, F, Frignani, A, Grassi, V, Balbo, A, Trabanelli, G, “Organo-Silane Coatings for AZ31 Magnesium Alloy Corrosion Protection.” Mater. Chem. Phys., 110 (2–3) 263–268 (2008)

    Article  CAS  Google Scholar 

  20. Kannan, MB, Gomes, D, Dietzel, W, Abetz, V, “Polyoxadiazole-Based Coating for Corrosion Protection of Magnesium Alloy.” Surf. Coat. Technol., 202 (19) 4598–4601 (2008)

    Article  CAS  Google Scholar 

  21. Duan, HP, Du, KQ, Yan, CW, Wang, FH, “Electrochemical Corrosion Behavior of Composite Coatings of Sealed MAO Film on Magnesium Alloy AZ91D.” Electrochim. Acta, 51 (14) 2898–2908 (2006)

    Article  CAS  Google Scholar 

  22. Zhu, D, van Ooij, WJ, “Corrosion Protection of Metals by Water-Based Silane Mixtures of Bis-[trimethoxysilylpropyl]amine and Vinyltriacetoxysilane.” Prog. Org. Coat., 49 (1) 42–53 (2004)

    Article  CAS  Google Scholar 

  23. Mobin, M, “Investigations on the Suitability of Coated Steel Piping System for High Pressure Seawater Reverse Osmosis Application.” J. Mater. Eng. Perform., 19 (2) 257–263 (2010)

    Article  CAS  Google Scholar 

  24. Lu, HB, Hu, Y, Gu, MH, Tang, SC, Lu, HM, Meng, XK, “Synthesis and Characterization of Silica–Acrylic–Epoxy Hybrid Coatings on 430 Stainless Steel.” Surf. Coat. Technol., 204 (1–2) 91–98 (2009)

    Article  CAS  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Jinwei Wang.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Wang, J., Tang, J. & He, Y. The particle size effect of MALPB-DEA dispersions on their anticorrosion performances as waterborne coatings on galvanized sheet. J Coat Technol Res 8, 11–17 (2011). https://doi.org/10.1007/s11998-010-9268-z

Download citation

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11998-010-9268-z

Keywords

Navigation