Abstract
The strain rate dependence of mechanical properties of AZ91D alloy composites filled with 5 wt.% hollow fly ash cenosphere is examined in the strain rate range of 630–1,203 s−1 using a split-Hopkinson pressure bar system. In addition, a test scheme is designed to study the intermediate strain rate response of the material. Addition of fly ash caused grain refinement and finer precipitates in the matrix alloy. Compared to the matrix alloy, the energy absorption is higher in AZ91D/fly ash cenosphere composites at comparable strain rates. In addition, the yield strength is found to be about 19–41% higher in the composites containing fly ash cenospheres.
Similar content being viewed by others
References
T.P.D. Rajan, R.M. Pillai, B.C. Pai, K.G. Satyanarayana, and P.K. Rohatgi, Composites Science and Technology, 67(15–16) (2007), pp. 3369–3377.
P.K. Rohatgi, R.Q. Guo, H. Iksan, E.J. Borchelt, and R. Asthana, Materials Science and Engineering: A, 244(1) (1998), pp. 22–30.
Q. Zhang, P.D. Lee, R. Singh, G. Wu, and T.C. Lindley, Acta Materialia, 57(10) (2009), pp. 3003–3011.
P.K. Rohatgi, A. Daoud, B.F. Schultz, and T. Puri, Composites Part A: Applied Science and Manufacturing, 40(6–7) (2009), pp. 883–896.
D.K. Balch, J.G. O'Dwyer, G.R. Davis, C.M. Cady, G.T. Gray III, and D.C. Dunand, Materials Science and Engineering A, 391(1–2) (2005), pp. 408–417.
G.H. Wu, Z.Y. Dou, D.L. Sun, L.T. Jiang, B.S. Ding, and B.F. He, Scripta Materialia, 56(3) (2007), pp. 221–224.
Z.Y. Dou, L.T. Jiang, G.H. Wu, Q. Zhang, Z.Y. Xiu, and G.Q. Chen, Scripta Materialia, 57(10) (2007), pp. 945–948.
B.L. Mordike and T. Ebert, Materials Science and Engineering A, 302(1) (2001), pp. 37–45.
A. Luo, JOM, 54(2) (2002), pp. 42–48.
B. Wolf, C. Fleck, and D. Eifler, International Journal of Fatigue, 26(12) (2004), pp. 1357–1363.
B.W. Chua, L. Lu, and M.O. Lai, Composite Structures, 47(1–4) (1999), pp. 595–601.
Y. Guangyin, S. Yangshan, and D. Wenjiang, Scripta Materialia, 43(11) (2000), pp. 1009–1013.
B. Nami, S.G. Shabestari, H. Razavi, S. Mirdamadi, and S.M. Miresmaeili, Materials Science and Engineering: A. 528(3) (2011), pp. 1261–1267.
S.L. Zhang, Y.T. Zhao, G. Chen, X.N. Cheng, C.J. She, X.Y. Wang, and D.N. Wu, J. Alloys and Compounds, 494(1–2) (2010), pp. 94–97.
Q.C. Jiang, X.L. Li, and H.Y. Wang, Scripta Materialia, 48(6) (2003), pp. 713–717.
G.T. Gray III, ASM Handbook Vol. 8: Mechanical Testing and Evaluation (Materials Park, OH: ASM International, 2000), pp. 462–476.
R.M. Davies, Philosophical Transactions of the Royal Society of London. Series A, Mathematical and Physical Sciences, 240(821) (1948), pp. 375–457.
K.T. Ramesh, Springer Handbook of Experimental Solid Mechanics, ed. W.N. Sharpe (New York: Spinger Science, 2008), pp. 929–960.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Luong, D.D., Gupta, N. & Rohatgi, P.K. The high strain rate compressive response of Mg-Al alloy/fly Ash cenosphere composites. JOM 63, 48–52 (2011). https://doi.org/10.1007/s11837-011-0028-z
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11837-011-0028-z