Abstract
Alloy 718 given the conventional 718/621°C age-hardening treatment was thermally aged at 593°C, 621°C, and 649°C for up to 50,000 h. These temperatures bracket the lowest of the duplex age-hardening temperatures. Subsequent creep-rupture tests conducted at the same temperature of thermal aging show no detrimental effects of 593°C aging after 50,000 h. Material aged for 50,000 h and tested at 621°C shows the rupture life to be approximately 60–65% of the unaged material, but at 649°C, the aged-material rupture life is on the order of 15% of the unaged material.
Similar content being viewed by others
References
J.F. Barker et al., “Long Term Stability of Inconel 718,” J. Metals, 22 (1) (1970), p. 31.
J.W. Brooks and P.J. Bridges, Superalloys 1988, ed. S. Reichman et al. (Warrendale PA: TMS, 1988), pp. 33–42.
J.F. Radavich, “Long Time Stability of a Wrought Alloy 718 Disk,” Superalloy 718—Metallurgy and Applications, ed. E.A. Loria (Warrendale, PA: TMS, 1989).
G.E. Korth, “Mechanical Properties Test Data of Alloy 718 for Liquid Metal Fast Breeder Reactor Applications,” EG&G Report No. EGG-2229 (Washington, D.C.: DOE, January 1983).
J.F. Radavich and G.E. Korth, “High Temperature Degradation of Alloy 718 after Longtime Exposures,” Superalloys 1992, ed. S.D. Antolovich et al. (Warrendale, PA: TMS, 1992), pp. 497–506.
G.E. Korth and C.L. Trybus, “Tensile Properties and Microstructure of Alloy 718 Thermally Aged to 50,000 h,” Superalloys 718, 625 and Various Derivatives, ed. E.A. Loria (Warrendale, PA: TMS, 1991), pp. 437–446.
C.R. Brinkman, M.K. Booker, and J. L. Ding, “Creep and Creep-Rupture Behavior of Alloy 718,” Superalloys 718, 625 and Various Derivatives, ed. E.A. Loria (Warrendale, PA: TMS, 1991), pp. 519–536.
G.R. Smolik and G.E. Korth, “Reference Heat of Alloy 718 for Department of Energy Programs,” EG&G Report No. TREE-1253 (Washington, D.C.: DOE, April 1978).
J.F. Radavich, “Metallography of a High Strength Modified 718 Alloy—PWA 1472,” Superalloys 718, 625 and Various Derivatives, ed. E.A. Loria (Warrendale, PA: TMS, 1991), pp. 865–877.
Author information
Authors and Affiliations
Additional information
For more information, contact G.E. Korth, Bechtel BWXT Idaho, LLC, Idaho National Engineering and Environmental Laboratory, Idaho Falls, Idaho 83415-2218; (208) 526-0348; fax (208) 526-0690; e-mail gok2@inel.gov.
Rights and permissions
About this article
Cite this article
Korth, G.E. Creep rupture of alloy 718 after thermal aging. JOM 52, 40–42 (2000). https://doi.org/10.1007/s11837-000-0114-0
Issue Date:
DOI: https://doi.org/10.1007/s11837-000-0114-0