Abstract
Multizone circulating bed reactors (MZCR) have the exclusive characteristics of producing polymers of different molecular weights in a single particle. Traditional fluidized bed reactors, on the other hand, can produce only one kind of molecular weight with relatively narrow distribution. A dynamic model for the MZCR is used to illustrate the basic dynamic behavior of the new reactor design used for polyethylene production. The model is used to study the copolymerization of ethylene with butene. Several parameter sensitivity analyses are performed to show the computer-simulated time responses for reactor temperature, number-average molecular weight, weight-average molecular weight, catalyst feed rate and the monomer/comonomer concentration along the reactor length. At certain operating conditions dynamic instability is observed and the results for the effect of cooling water temperature, catalyst feed rate, monomer and comonomer initial feed concentration on the reactor temperature and polymer molecular weight reveal that the system is very sensitive to disturbances in the heat exchanger coolant temperature. Also, at some operating conditions, the reactor temperature oscillates above the polymer melting temperature. Temperature runaway above polymer softening point is a serious problem which may cause polymer melting and hence reactor shutdown. The oscillatory behavior of the reactor temperature necessitates a suitable temperature control scheme to be installed.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
E. Benham and M. McDaniel, Ethylene polymers, HDPE, in Encyclopedia of polymer science and technology, H. Mark ed., Wiley, New York, 382–412 (2003).
H. Knuuttila, A. Lehtinen and A. N. Pakarinen, Adv. Polym. Sci., 169, 13 (2004).
M. Covezzi and G. Mei, Chem. Eng. Sci., 56, 4059 (2003).
G. Govoni, R. Rinaldi, M. Covezzi and P. Galli, Process and apparatus for gas phase polymerization of α-olefins, U.S. Patent, 5,698,642 (1997).
J. L. Santos, M. Vecino, E. Ochoteco, M. Montes and J. M. Asua, Proc. 7th Int Workshop Polym. Reaction Eng., 155 (2001).
K. B. McAuley, J. F. MacGregor and A. E. Hamielec, AIChE J., 36, 837 (1999).
F. A.N. Fernandes and L. M. F. Lona, J. Appl. Polym. Sci., 93, 1053 (2004).
F. A.N. Fernandes and L. M. F. Lona, J. Appl. Polym. Sci., 93, 1042 (2004).
H. S. Cho, K. H. Choi, D. J. Choi and W.Y. Lee, Korean J. Chem. Eng., 17, 205 (2000).
H. S. Cho and W.Y. Lee, Korean J. Chem. Eng., 19, 557 (2002).
J. S. Chung, G. Tairova, Y. Zhang, J. C. Hsu, K. B. McAluley and D.W. Bacon, Korean J. Chem. Eng., 19, 597 (2002).
Y.G. Ko, H. S. Cho, K. H. Choi and W.Y. Lee, Korean J. Chem. Eng., 16, 562 (1999).
H. Hatzantonis, H. Yiannoulakis and A. Yiagopoulos, Chem. Eng. Sci., 55, 3237 (2000).
H. Tobita and A. H. Hamielec, Polymer, 32(14), 2641 (1991).
D. Kunii and O. Levenspiel, Chem. Eng. Sci., 52, 2471 (1997).
N. M. Ghasem, Chem. Eng. Technol., 22(9), 777 (1999).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Ghasem, N.M., Ang, W.L. & Hussain, M.A. Dynamics and stability of ethylene polymerization in multizone circulating reactors. Korean J. Chem. Eng. 26, 603–611 (2009). https://doi.org/10.1007/s11814-009-0102-1
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11814-009-0102-1