Abstract
Mathematical model of filling disk-shaped mold cavity in steady state was studied. And the mathematical model under vibration field was developed from the model in steady state. According to the model of filling disk-shaped mold cavity in steady state, the filling time, the distribution of velocity field and the pressure field were obtained. The analysis results from rheological analytic model were compared with the numerical simulation results using Moldflow software in the powder injection molding filling process. Through the comparison, it is found that it is unreasonable to neglect the influence of temperature when calculated the pressure changing with the time at the cavity gate, while it can be neglected in other situations such as calculating the distribution of the velocity fields. This provides a theoretical reference for the establishment of correct model both in steady state and under vibration force field in the future.
Similar content being viewed by others
References
GERMAN R M, BOSE A. Injection molding of metals and ceramics [M]. Princeton: MPIF, 1997: 1–2.
HIEBER C A, SHEN S F. A finite-element/finite-different simulation of the injection molding filing process [J]. Journal of Non-Newtonian Fluid Mechanics, 1980, 7: 1–32.
HETUJ F, GAO D M, GARCIA-REJON A, SLLOUM G. First joint tropical conference on processing [C]// Structure and Properties of Polymeric Materials, Chicago, 1996.
COUPEZ T, DABOUSSY D, BIGOT E, BATKAM S, A-GASSANT J F. 16th Annual Meeting of Polymer Processing Society. Shanghai, China, 2000.
YUAN Zhong-shuang, LI De-qun, XIAO Jing-rong. A review of flow simulation in injection mold [J]. China Plastics, 1993, 7(1): 4–10. (in Chinese)
NAJIMI L A, LEE D. Modelling of mold filling process for powder injection molding [J]. Polym Eng Sci, 1991, 31(5): 1137–1148.
CHANG H H, HIEBER C A, WANG K K. A unified simulation of the filling and post filling stages in injection molding (part I): Formulation [J]. Folym Eng Sci, 1991, 31(2): 116–124.
GUAN Qing, SHEN Kai-zhi. Numerical analysis of mold filling process in injection molding [J]. China Plastics, 1990, 4(20): 81–90. (in Chinese)
WANG Li-xia, LIU Chun-tai. 3D flow analysis of plastic injection molding [J]. Journal of Zhengzhou Institute of Technology, 1995, 16(2): 101–108. (in Chinese)
WU Ying-hui, WANG Peng-ju. Boundary element method for the flow simulation of injection mould filling [J]. China Plastics, 1996, 10(5): 78–80. (in Chinese)
Author information
Authors and Affiliations
Corresponding author
Additional information
Foundation item: Project(10672197) supported by the National Natural Science Foundation of China; Project(07JJ1001) supported by the Natural Science Foundation of Hunan Province for Distinguished Young Scholars, China
Rights and permissions
About this article
Cite this article
Liu, Yj., Li, Xg., Huang, Yg. et al. Comparison of rheological analytic model with numerical simulation in powder injection molding filling process. J. Cent. South Univ. Technol. 15 (Suppl 1), 51–56 (2008). https://doi.org/10.1007/s11771-008-0313-3
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11771-008-0313-3