Skip to main content
SpringerLink
Log in

Plastic performance of soybean protein components

  • Published:
Journal of the American Oil Chemists' Society

Abstract

Soybean proteins recently have been considered as petroleum polymer alternatives in the manufacture of adhesives, plastics, and various binders. The objective of this work was to characterize the plastic performance of soybean protein components during molding processes. Two major soybean protein fractions, 7S-rich globulin (7S-RG) and 11S-rich globulin (11S-RG) were separated from defatted soybean flour, and their purity was examined by sodium dodecyl sulfate-polyacrylamide gel eletrophoresis and high-performance liquid chromatography. The thermal transition properties of the two fractions at 10% moisture content were 137.6°C for 7S and 163°C for 11S, as analyzed using differential scanning calorimetry (DSC). Plastics were prepared using a hot press at various molding temperatures that were selected based on the proteins’ thermal transition temperatures obtained by DSC. The plastics were evaluated for mechanical properties, water absorption, and microstructure. The plastics prepared with temperatures at or close to the thermal transition temperature showed a smooth, uniform, and complex structure. Results showed that the plastics made from 11S-RG at its thermal transition temperature were stronger (35 MPa) and had lower water absorption than those made from 7S-RG at 145°C (26 MPa). The plastics made from the 7S- and 11S-RG mixture had the highest tensile strength (39 MPa) and medium water absorption compared to those made from 7S- and 11S-RG alone. These mechanical properties and water absorption behaviors were significantly affected by molding temperatures. The results obtained from this research indicated that interaction between 7S- and 11S-RG could occur during molding and that thermal transition temperature played an important role in thermal processing of soybean proteins.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  1. Anonymous, Plastic Durables: Environmental Impact, Plastic Eng. 50(2):34 (1994).

  2. Lambuth, A.L. Protein for Woods, in Handbook of Adhesive Technology, edited by A. Pizzi and K.L. Mittal, Marcel Dekker, Inc., 1994, pp. 259–281.

  3. Kalapathy, U., N.S. Hettiarachchy, D. Myers, and M.A. Hanna, Modification of Soy Proteins and their Adhesive Properties on Woods, J. Am. Oil Chem. Soc. 72:507–510 (1995).

    CAS  Google Scholar 

  4. Hettiarachchy, N.S., U. Kalapathy, and D.J. Mayers, Alkali-Modified Soy Protein with Improved Adhesive and Hydrophobic Properties, Ibid.1461–1464 (1995).

    Article  CAS  Google Scholar 

  5. Sun, X., Current and Potential Applications of Soy Protein Polymers, Abstract in the 7th Bio/Environmentally Degradable Polymers Annual Meeting, Aug. 19–22, Cambridge, MA (1998).

  6. Krochta, J.M., E.A. Baldwin, and M. Nisperos-Carriedo, Edible Coatings and Films to Improve Food Quality, Technomic Publishing Company Inc., Lancaster, 1994.

    Google Scholar 

  7. Jane, J.L., S. Lim, and I. Paetau, Degradable Plastics Made from Starch and Proteins, in Biodegradable Polymers and Packaging, Technomic Publishing Co., Lancaster, 1993, pp. 63–73.

    Google Scholar 

  8. Paetau, I., C.-Z. Chen, and J. Jane, Biodegradable Plastic Made from Soybean Products. I. Effects of Preparation and Processing on Mechanical Properties and Water Absorption, Ind. Eng. Chem. Res. 33:1821–1827 (1994).

    Article  CAS  Google Scholar 

  9. Wang, S., H.-J. Sue, and J. Jane, Effect of Polyhydric Alcohols on the Mechanical Properties of Soy Protein Plastics, Pure Appl. Chem. A33:557–569 (1996).

    CAS  Google Scholar 

  10. Wolf, W.J., Soy Proteins: Their Functional, Chemical, and Physical Properties, J. Agric. Food Chem. 18:967–976 (1970).

    Article  Google Scholar 

  11. Roberts, R.C., and D.R. Briggs, Isolation and Characterization of 7S Components of Soy Globulins, Cereal Chem. 42:72–76 (1965).

    Google Scholar 

  12. Saio, K., I. Satoh, and T. Watanabe, Food Use of Soybean 7S and 11S Proteins: High Temperature Expansion Characteristics of Gels, J. Food Sci. 39:777–782 (1973).

    Article  Google Scholar 

  13. Saio, K., and W. Watanabe, Differences in the Functional Properties of 7S and 11S Soybean Proteins, J. Texture Stud. 9:135–138 (1978).

    Article  CAS  Google Scholar 

  14. German, J.B., T.E. O’Neil, and J.E. Kinsella, Film Forming and Foaming Behavior of Food Proteins, J. Am. Oil Chem. Soc. 62:1358–1366 (1985).

    Article  CAS  Google Scholar 

  15. Bogracheva, T.Ya., E.E. Braudo, and V.B. Tolstoguzov, Emulsifing Properties of Soybean Globulins and Their Variation with Addition of Some Inorganic Salts, Food Hydrocolloids 4:1–18 (1980).

    Article  Google Scholar 

  16. Mo, X., and X. Sun, Curing Pressure and Temperature on Properties of Soy Protein Polymers. Abstract in the 6th Bio/Environmentally Degradable Polymers Annual Meetings, Sep. 17–20, San Diego (1997).

  17. Tolstoguzov, V.B. Some Physico-Chemical Aspects of Protein Processing into Foodstuffs, Food Hydrocolloids 2:339–344 (1988).

    CAS  Google Scholar 

  18. Kitabatake, N., and M. Tahara, Thermal Denaturation of Soybean Protein at Low Water Contents, Agric. Biol. Chem. 54:2205–2212 (1990).

    CAS  Google Scholar 

  19. Babajimopoulos, M., S. Damodaran, S.S.H. Rizvi, and J.E. Kinsella, Effect of Various Anions on the Rheological and Gelling Behavior of Soy Proteins: Thermodynamic Observations, J. Agric. Food Chem. 31:1270–1275 (1983).

    Article  CAS  Google Scholar 

  20. Utsumi, S., and J.E. Kinsella, Forces Involved in Soy Protein Gelation: Effects of Various Reagents on the Formation, Hardness and Solubility of Heat-Induced Gels Made from 7S, 11S, and Soy Isolate, J. Agric. Food Chem. 50:1278–1282 (1985).

    CAS  Google Scholar 

  21. Utsumi, S., and J.E. Kinsella, Structure Function Relationships in Food Proteins: Subunit Interactions in Heat Induced Gelation of 7S and 11S, and Soy Isolate Proteins, Ibid.297–303 (1985).

    Article  CAS  Google Scholar 

  22. Nagano, T., M. Hirotsuka, H. Mosi, K. Kohyama, and K. Nishinari, Dynamic Viscoelastic Study on the Gelatin of 7S Globulin from Soybeans, Ibid.941–944 (1992).

    Article  CAS  Google Scholar 

  23. American Association of Cereal Chemists, Approved Method of the AACC, 9th edn., Method 44-15A, Final approved 10-30-75, revised 10-28-81, and 10-26-94 (1995).

  24. Laemli, J., Cleavage of Structural Protein During the Assembly of the Head of Bacteriophage, Nature 227:680–683 (1970).

    Article  ADS  Google Scholar 

  25. Annual Book of ASTM Standards, 1992.8.01, D686-92, Standard Dimension of Test Specimen for Plastics, 1992.

  26. Ibid., D638-92, Standard Mechanical Testing Methods for Plastics, 1992.

  27. Ibid., D570-81, Standard Test Methods for Water Absorption of Plastics, 1992.

  28. Catsimpoolas, N.A., Note on Dissimilar Subunits in Dissociated Soybean Globulin, Cereal Chem. 47:70–71 (1970).

    CAS  Google Scholar 

  29. Hu, B., and A. Esen, Heterogenicity of Soybean Proteins: Two-Dimensional Electrophoretic Maps of Three Solubility Fraction, J. Agric. Food Chem. 30:21–25 (1982).

    Article  CAS  Google Scholar 

  30. Utsumi, S., S. Domodaran, and J.E. Kinsella, Heat Induced Interactions Between Soybean Proteins: Preferential Association of 11S Basic Subunits and Beta Subunits of 7S, Ibid.1406–1412 (1984).

    Article  CAS  Google Scholar 

  31. Yamagishi, T., A. Miyakawa, N. Noda, and F. Yamauchi, Isolation and Electrophoretic Analysis of Heat-Induced Products of Mixed Soybean 7S and 11S Globulins, Agric. Biol. Chem. 47:1229–1237 (1983).

    CAS  Google Scholar 

  32. Niwae, E., T. Wang, S. Kanoh, and T. Nakayana, Surface Hydrophobicity of Gelling Substance, Bull. Jpn. Soc. Sci. Fisheries 54:1851–1853 (1988).

    Google Scholar 

  33. Sorgentini, A.D., and R.J. Wagner, Effect of Thermal Treatment of Soy Protein Isolate on the Characteristics and Structure-Function Relationships of Soluble and Insoluble Fractions, J. Agric. Food Chem. 43:2471–2479 (1995).

    Article  CAS  Google Scholar 

  34. Petruccelli, S., and M.C. Anon, Relationship Between the Method of Obtention and the Structural and Functional Properties of Soy Protein Isolates. I. Structural and Hydration Properties, Ibid.2161–2169 (1994).

    Article  CAS  Google Scholar 

  35. Kajiyama, N., S. Isobe, K. Uemura, and N. Noguchi, Changes of Soybean Proteins under Ultra-High Hydraulic Pressure, Int. J. Food Sci. Technol. 30:147–158 (1995).

    CAS  Google Scholar 

  36. Takagi, S., N. Okamoto, M. Akashi, and K. Yasumatsu, Hydrophobic Bonding and SS Bonding in Heat Denaturation of 11S of Soybean Protein, Nippon Shokuhin Kogyo Gakkaishi 26:139–143 (1979).

    CAS  Google Scholar 

  37. Wolf, W.J., and T. Tamura, Heat Denaturation of Soybean 11S Protein, Cereal Chem. 46:331–344 (1969).

    CAS  Google Scholar 

  38. Draper, M. and N.A. Catsimpoolas, Disulfide and Sulfhydryl Groups in Glycinin, Ibid.16–23 (1978).

    CAS  Google Scholar 

  39. Peng, I.C., D.W. Quass, W.R. Dayton, and C.E. Allen, The Physicochemical and Functional Properties of Soybean 11S Globulin—A Review, Cereal Chem. 61:480–490 (1984).

    CAS  Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Department of Grain Science and Industry, Kansas State University, 66506, Manhattan, Kansas

    Xiuzhi Susan Sun, Hak-Ryang Kim & Xiaoqun Mo

Authors
  1. Xiuzhi Susan Sun
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Hak-Ryang Kim
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Xiaoqun Mo
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Xiuzhi Susan Sun.

About this article

Cite this article

Sun, X.S., Kim, HR. & Mo, X. Plastic performance of soybean protein components. J Amer Oil Chem Soc 76, 117–123 (1999). https://doi.org/10.1007/s11746-999-0057-8

Download citation

  • Received:

  • Accepted:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11746-999-0057-8

Key words

Search

Navigation