Abstract
Understanding the nature of hydrophobicity has fundamental importance in environmental applications. Using spherical silica nanoparticles (diameter = 369 ± 7 nm) as the model material, the current study investigates the relationship between the alkyl chain network and hydro-phobicity. Two alkyl silanes with different chain length (triethoxymethylsilane (C1) vs. trimethoxy(octyl)silane (C8)) were utilised separately for the functionalisation of the nanoparticles. Water contact angle and inverse gas chromatography results show that the alkyl chain length is essential for controlling hydrophobicity, as the octyl-functionalised nanoparticles were highly hydrophobic (water contact angle = 150.6° ± 6.6°), whereas the methyl-functionalised nanoparticles were hydrophilic (i.e., water contact angle = 0°, similar to the pristine nanoparticles). The homogeneity of the octyl-chain network also has a significant effect on hydrophobicity, as the water contact angle was reduced significantly from 148.4° ± 3.5° to 30.5° ± 1.0° with a methyl-/octyl-silane mixture (ratio = 160:40 µL·g−1 nanoparticles).
![](http://media.springernature.com/lw685/springer-static/image/art%3A10.1007%2Fs11705-020-2003-0/MediaObjects/11705_2020_2003_Fig1_HTML.jpg)
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Sun X, Zhang Y, Chen G, Gai Z. Application of nanoparticles in enhanced oil recovery: a critical review of recent progress. Energies, 2017, 10(3): 345
Behzadi A, Mohammadi A. Environmentally responsive surface-modified silica nanoparticles for enhanced oil recovery. Journal of Nanoparticle Research, 2016, 18(9): 266
Rognmo A U, Heldal S, Fernø M A. Silica nanoparticles to stabilize CO2-foam for improved CO2 utilization: enhanced CO2 storage and oil recovery from mature oil reservoirs. Fuel, 2018, 216: 621–626
Yang X, Shen Z, Zhang B, Yang J, Hong W X, Zhuang Z, Liu J. Silica nanoparticles capture atmospheric lead: implications in the treatment of environmental heavy metal pollution. Chemosphere, 2013, 90(2): 653–656
Stöber W, Fink A, Bohn E. Controlled growth of monodisperse silica spheres in the micron size range. Journal of Colloid and Interface Science, 1968, 26(1): 62–69
Bogush G H, Tracy M A, Zukoski Iv C F. Preparation of monodisperse silica particles: control of size and mass fraction. Journal of Non-Crystalline Solids, 1988, 104(1): 95–106
Park S K, Kim K D, Kim H T. Preparation of silica nanoparticles: determination of the optimal synthesis conditions for small and uniform particles. Colloids and Surfaces. A, Physicochemical and Engineering Aspects, 2002, 197(1–3): 7–17
Costa C A, Leite C A, Galembeck F. Size dependence of Stöber silica nanoparticle microchemistry. Journal of Physical Chemistry B, 2003, 107(20): 4747–4755
Green D L, Lin J S, Lam Y F, Hu M C, Schaefer D W, Harris M T. Size, volume fraction, and nucleation of Stober silica nanoparticles. Journal of Colloid and Interface Science, 2003, 266(2): 346–358
Nozawa K, Gailhanou H, Raison L, Panizza P, Ushiki H, Sellier E, Delville J P, Delville M H. Smart control of monodisperse Stöber silica particles: effect of reactant addition rate on growth process. Langmuir, 2005, 21(4): 1516–1523
Masalov V M, Sukhinina N S, Kudrenko E A, Emelchenko G A. Mechanism of formation and nanostructure of Stöber silica particles. Nanotechnology, 2011, 22(27): 275718
Li S, Wan Q, Qin Z, Fu Y, Gu Y. Understanding Stöber silica’s pore characteristics measured by gas adsorption. Langmuir, 2015, 31(2): 824–832
Greasley S L, Page S J, Sirovica S, Chen S, Martin R A, Riveiro A, Hanna J V, Porter A E, Jones J R. Controlling particle size in the Stöber process and incorporation of calcium. Journal of Colloid and Interface Science, 2016, 469: 213–223
Liberman A, Mendez N, Trogler W C, Kummel A C. Synthesis and surface functionalization of silica nanoparticles for nanomedicine. Surface Science Reports, 2014, 69(2–3): 132–158
Sawada H, Tashima T, Nishiyama Y, Kikuchi M, Goto Y, Kostov G, Ameduri B. Iodine transfer terpolymerization of vinylidene fluoride, a-trifluoromethacrylic acid and hexafluoropropylene for exceptional thermostable fluoropolymers/silica nanocomposites. Macromolecules, 2011, 44(5): 1114–1124
Kobayashi M, Juillerat F, Galletto P, Bowen P, Borkovec M. Aggregation and charging of colloidal silica particles: effect of particle size. Langmuir, 2005, 21(13): 5761–5769
Binks B P, Lumsdon S O. Influence of particle wettability on the type and stability of surfactant-free emulsions. Langmuir, 2000, 16 (23): 8622–8631
Aveyard R, Binks B P, Clint J H. Emulsions stabilised solely by colloidal particles. Advances in Colloid and Interface Science, 2003, 100: 503–546
Balard H, Papirer E, Khalfi A, Barthel H. Trimethylchlorosilane modified silica surfaces: characterization by inverse gas chromatography using PDMS oligomers as probes. Composite Interfaces, 1998, 6(1): 19–25
Ghaleh V R, Mohammadi A. The stability and surface activity of environmentally responsive surface-modified silica nanoparticles: the importance of hydrophobicity. Journal of Dispersion Science and Technology, 2020, 41(9): 1299–1310
Zhao B, Zhu L. Mixed polymer brush-grafted particles: a new class of environmentally responsive nanostructured materials. Macromolecules, 2009, 42(24): 9369–9383
Wang Y, Fan D, He J, Yang Y. Silica nanoparticle covered with mixed polymer brushes as Janus particles at water/oil interface. Colloid & Polymer Science, 2011, 289(17–18): 1885–1894
Pyun J, Jia S, Kowalewski T, Patterson G D, Matyjaszewski K. Synthesis and characterization of organic/inorganic hybrid nanoparticles: kinetics of surface-initiated atom transfer radical polymerization and morphology of hybrid nanoparticle ultrathin films. Macromolecules, 2003, 36(14): 5094–5104
Worthen A J, Tran V, Cornell K A, Truskett T M, Johnston K P. Steric stabilization of nanoparticles with grafted low molecular weight ligands in highly concentrated brines including divalent ions. Soft Matter, 2016, 12(7): 2025–2039
Schultz J A, Lavielle L, Martin C. The role of the interface in carbon fibre-epoxy composites. Journal of Adhesion, 1987, 23(1): 45–60
Della Volpe C, Siboni S. Some reflections on acid-base solid surface free energy theories. Journal of Colloid and Interface Science, 1997, 195(1): 121–136
Das S C, Larson I, Morton D A, Stewart P J. Determination of the polar and total surface energy distributions ofparticulates by inverse gas chromatography. Langmuir, 2011, 27(2): 521–523
Van Oss C J, Chaudhury M K, Good R J. Interfacial Lifshitz-van der Waals and polar interactions in macroscopic systems. Chemical Reviews, 1988, 88(6): 927–941
Heng J Y, Thielmann F, Williams D R. The effects ofmilling on the surface properties of form I paracetamol crystals. Pharmaceutical Research, 2006, 23(8): 1918–1927
Ho R, Heng J Y. A review of inverse gas chromatography and its development as a tool to characterize anisotropic surface properties of pharmaceutical solids. Kona Powder and Particle Journal, 2013, 30(0): 164–180
Karde V, Ghoroi C. Influence of surface modification on wettability and surface energy characteristics of pharmaceutical excipient powders. International Journal of Pharmaceutics, 2014, 475(1–2): 351–363
Ramanaiah S, Karde V, Venkateswarlu P, Ghoroi C. Effect of temperature on the surface free energy and acid-base properties of Gabapentin and Pregabalin drugs—a comparative study. RSC Advances, 2015, 5(60): 48712–48719
Karde V, Ghoroi C. Fine powder flow under humid environmental conditions from the perspective of surface energy. International Journal of Pharmaceutics, 2015, 485(1–2): 192–201
Jafarzadeh M, Adnan R, Mazlan M K. Thermal stability and optical property of ormocers (organically modified ceramics) nanoparticles produced from copolymerization between amino-silanes and tetraethoxysilane. Journal of Non-Crystalline Solids, 2012, 358 (22): 2981–2987
Wu F, Zhang B, Yang W, Liu Z, Yang M. Inorganic silica functionalized with PLLA chains via grafting methods to enhance the melt strength of PLLA/silicananocomposites. Polymer, 2014, 55 (22): 5760–5772
Sándor M, Nistor C, Szalontai G, Stoica R, Nicolae C, Alexandrescu E, Fazakas J, Oancea F, Donescu D. Aminopropyl-silica hybrid particles as supports for humic acids immobilization. Materials (Basel), 2016, 9(1): 34
Yuan W, Wang F, Chen Z, Gao C, Liu P, Ding Y, Zhang S, Yang M. Efficient grafting of polypropylene onto silica nanoparticles and the properties of PP/PP-g-SiO2 nanocomposites. Polymer, 2018, 151: 242–249
Acknowledgements
This study is part of the SCoBiC project funded by the UK’s EPSRC (EP/N015916/1). The authors declare no conflict of interests.
Author information
Authors and Affiliations
Corresponding author
Electronic Supplementary Material
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Chen, W., Karde, V., Cheng, T.N.H. et al. Surface hydrophobicity: effect of alkyl chain length and network homogeneity. Front. Chem. Sci. Eng. 15, 90–98 (2021). https://doi.org/10.1007/s11705-020-2003-0
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11705-020-2003-0