Correction to: J Therm Spray Tech (2018) 27:556 https://doi.org/10.1007/s11666-018-0713-3

Addendum is for Figure 8 caption.

Current caption: Thermal cycling results for samples tested at 1150 °C for 60 min, followed by 10-min fan cooling. Results indicate that the single-phase sample has the best thermal cyclic life, while the spray-dried coating exhibits a lower lifetime.

Correct caption: Thermal cycling results for samples tested at 1150 °C for 50 min, followed by 10-min fan cooling. Results indicate that the single-phase spray-dried sample has the best thermal cyclic life, while the two-phase core–clad coating exhibits a lower lifetime.