Skip to main content
Log in

Specific Measurements of In-Flight Droplet and Particle Behavior and Coating Microstructure in Suspension and Solution Plasma Spraying

  • Peer Reviewed
  • Published:
Journal of Thermal Spray Technology Aims and scope Submit manuscript

Abstract

The plasma spraying of suspensions of sub-micro- or nano-sized particles and of solutions of chemicals precursors produces finely structured coatings that have generally enhanced properties compared to conventional plasma-sprayed coatings. However, most techniques used in conventional plasma spraying are no more adapted to experimentally observe the behavior of the liquid feedstock in the plasma jet and investigate the effect of the operating conditions on liquid fragmentation in droplets, solid particles released by solvent evaporation or formed from the chemical precursors. Also, specific techniques have to be used to study the coating formation and characterize its microstructure. This paper aims to present the main techniques developed or adapted, up to now, to study the plasma-liquid feedstock interactions and characterize the coatings achieved by suspension and solution plasma spraying.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12

Similar content being viewed by others

References

  1. P. Fauchais, J. Heberlein, and M. Boulos, Thermal Spray Fundamentals, Springer, Berlin, 2014 (1560pp)

    Book  Google Scholar 

  2. P. Fauchais, G. Montavon, R.S. Lima, and B.R. Marple, Engineering a New Class of Thermal Spray Nano-Based Microstructures from Agglomerated Nanostructured Particles, Suspensions and Solutions: An Invited Review, J. Phys. D, 2011, 44, p 093001

    Article  Google Scholar 

  3. A. Bacciochini, F. Ben-Ettouil, E. Brousse, J. Ilavsky, G. Montavon, A. Denoirjean, S. Valette, and P. Fauchais, Quantification of Void Network Architectures of As-Sprayed and Aged Nanostructured Yttria-Stabilized Zirconia (YSZ) Deposits, Surf. Coat. Technol., 2010, 205, p 683-689

    Article  Google Scholar 

  4. K.A. Gross and S. Saber-Samandari, Revealing Mechanical Properties of a Suspension Plasma Sprayed Coating with Nano-indentation, Surf. Coat. Technol., 2009, 203, p 2995-2999

    Article  Google Scholar 

  5. E. Bannier, M. Vicent, E. Rayón, R. Benavente, M.D. Salvador, and E. Sánchez, Effect of TiO2 Addition on the Microstructure and Nano-mechanical Properties of Al2O3 Suspension Plasma Sprayed Coatings, Appl. Surf. Sci., 2014, 316, p 141-146

    Article  Google Scholar 

  6. P. Carpio, E. Rayón, L. Pawłowski, A. Cattini, R. Benavente, E. Bannier, M.D. Salvador, and E. Sánchez, Microstructure and Indentation Mechanical Properties of YSZ Nanostructured Coatings Obtained by Suspension Plasma Spraying, Surf. Coat. Technol., 2013, 220, p 237-243

    Article  Google Scholar 

  7. J. Fazilleau, C. Delbos, V. Rat, J.-F. Coudert, P. Fauchais, and B. Pateyron, Phenomena Involved in Suspension Plasma Spraying Part 1: Suspension Injection and Behaviour, Plasma Chem. Plasma Proc., 2006, 26(4), p 371-391

    Article  Google Scholar 

  8. K. Landes, Diagnostics in Plasma Spraying Techniques, Surf. Coat. Technol., 2006, 201, p 1948-1954

    Article  Google Scholar 

  9. G. Mauer, R. Vaßen, and D. Stöver, Plasma and Particle Temperature Measurements in Thermal Spray: Approaches and Applications, J. Therm. Spray Technol., 2011, 20(3), p 391-406

    Article  Google Scholar 

  10. J. Schein, M. Richter, K.D. Landes, G. Forster, J. Zierhut, and M. Dzulkor, Tomographic Investigation of Plasma Jets Produced by Multielectrode Plasma Torches, J. Therm. Spray Technol., 2008, 17(3), p 338-343

    Article  Google Scholar 

  11. R. Etchart-Salas, V. Rat, J.F. Coudert, P. Fauchais, N. Caron, K. Wittman, and S. Alexandre, Influence of Plasma Instabilities in Ceramic Suspension Plasma Spraying, J. Therm. Spray Technol., 2007, 16(5-6), p 857-865

    Article  Google Scholar 

  12. E. Meillot, D. Damiani, S. Vincent, C. Caruyer, and J.P. Caltagirone, Analysis by Modeling of Plasma Flow Interactions with Liquid Injection, Surf. Coat. Technol., 2013, 220, p 149-156

    Article  Google Scholar 

  13. D. Soysal and A. Ansar, A New Approach to Understand Liquid Injection into Atmospheric Plasma Jets, Surf. Coat. Technol., 2013, 220, p 187-190

    Article  Google Scholar 

  14. R. Vaßen, H. Kaßner, G. Mauer, and D. Stöver, Suspension Plasma Spraying: Process Characteristics and Applications, J. Therm. Spray Technol., 2010, 19(1-2), p 219-225

    Article  Google Scholar 

  15. G. Mauer, A. Guignard, R. Vaßen, and D. Stöver, Process Diagnostics in Suspension Plasma Spraying, Surf. Coat. Technol., 2010, 205, p 961-966

    Article  Google Scholar 

  16. F. Tarasi, M. Medraj, A. Dolatabadi, J. Oberste-Berghaus, and C. Moreau, Effective Parameters in Axial Injection Suspension Plasma Spray Process of Alumina-Zirconia Ceramics, J. Therm. Spray Technol., 2008, 17(5-6), p 685-691

    Article  Google Scholar 

  17. O. Tingaud, P. Bertrand, and G. Bertrand, Microstructure and Tribological Behavior of Suspension Plasma Sprayed Al2O3 and Al2O3-YSZ Composite Coatings, Surf. Coat. Technol., 2010, 205, p 1004-1008

    Article  Google Scholar 

  18. F. Tarasi, M. Medraj, A. Dolatabadi, J. Oberste-Berghaus, and C. Moreau, Phase Formation and Transformation in Alumina/YSZ Nanocomposite Coating Deposited by Suspension Plasma Spray Process, J. Therm. Spray Technol., 2010, 19(4), p 787-795

    Article  Google Scholar 

  19. O. Marchand, L. Girardot, M.P. Planche, P. Bertrand, Y. Bailly, and G. Bertrand, An Insight into Suspension Plasma Spray: Injection of the Suspension and Its Interaction with the Plasma Flow, J. Therm. Spray Technol., 2011, 20(6), p 1310-1320

    Article  Google Scholar 

  20. M. Raffel, C.E. Willert, S. Wereley, and J. Kompenhans, Particle Image Velocimetry: A Practical Guide, 2nd ed., Springer, Berlin, 2007

    Google Scholar 

  21. S. Goutier, J. Varin, W. Duarte, A. Joulia, and M. Vardelle, Laser Diagnostic Techniques for Suspension and Solution Plasma Spraying, in ITSC 2014 proc. (pub.) DVS Düsseldorf, 2014, p 634-640

  22. P. Fauchais, M. Vardelle, S. Goutier, and A. Vardelle, Key Challenges and Opportunities in Suspension and Solution Plasma Spraying, Plasma Chemistry Plasma Processing, Accepted (2015)

  23. O. Tingaud, A. Grimaud, A. Denoirjean, G. Montavon, V. Rat, J.-F. Coudert, P. Fauchais, and T. Chartier, Suspension Plasma-Sprayed Alumina Coating Structures: Operating Parameters Versus Coating Architecture, J. Therm. Spray Technol., 2008, 17, p 662-670

    Article  Google Scholar 

  24. P. Fauchais, R. Etchart-Salas, V. Rat, J.-F. Coudert, N. Caron, and K. Wittmann-Ténèze, Parameters Controlling Liquid Plasma Spraying: Solutions, Sols, or Suspensions, J. Therm. Spray Technol., 2008, 17, p 31-59

    Article  Google Scholar 

  25. L. Xie, E.H. Jordan, N.P. Padture, and M. Gell, Phase and Microstructural Stability of Solution Precursor Plasma Sprayed Thermal Barrier Coatings, Mater. Sci. Eng. A, 2004, 381, p 189-195

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to P. Fauchais.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Fauchais, P., Vardelle, M., Goutier, S. et al. Specific Measurements of In-Flight Droplet and Particle Behavior and Coating Microstructure in Suspension and Solution Plasma Spraying. J Therm Spray Tech 24, 1498–1505 (2015). https://doi.org/10.1007/s11666-015-0319-y

Download citation

  • Received:

  • Revised:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11666-015-0319-y

Keywords

Navigation