Abstract
Laser Flash is considered the standard technique for measuring the thermal diffusivity of solids. The interaction between TBC and the laser energy is studied because very low thermal effusivity and thermal diffusivity of TBC can produce very high temperature increase on the surface and temperature gradient within the sample. In such a case, microstructural modifications of TBC can be generated. In this work, such phenomena are studied experimentally on free standing TBC samples.
Similar content being viewed by others
References
W. Beele, G. Marijnissen, A. Van Lieshout (1999) The Evolution of Thermal BarrierCoatings—Status and Upcoming Solutions for Today’s Key Issues. Surf. Coat. Technol. 120-121:61-67
“Standard Test Method for Thermal Diffusivity of Solids by the Flash Method,” E1461-92, Annual Book of ASTM Standards, ASTM, p 1-8
J.A. Cape, G.W. Lehman (1963) Temperature and Finite Pulse-Time Effects in the Flash Method for Measuring Thermal Diffusivity. J. Appl. Phys. 34:1909-1913
R.D. Cowan (1963) Pulse Method of Measuring Thermal Diffusivity at High Temperatures. J. Appl. Phys., 34:926-927
A. Degiovanni A. Gery M. Laurent G. Sinicki, Simultaneous Determination of (Thermal) Diffusivity, Heat Capacity, and Thermokinetic Behaviour of Solid Materials. C.R. Hebd. Seances Acad. Sci. 283B(6), 167-170, 1976
D.P.H. Hasselman and K.Y. Donaldson, Role of Detector Non-Linearity in the Anoumalous Specimen Thickness and Temperature Dependence of the Thermal Diffusivity Measured by Laser-Flash Method, Conductivity 21, C.J. Cremers and H.A. Fine, Eds., 1990, Plenum Press, New York, 1990, p. 123-132
R.E. Taylor (1998) Thermal Conductivity Determination of Thermal Barrier Coatings. Mater. Sci. Eng. A 245:160-167
R.E. Taylor, X. Wang, X. Xu (1999) Thermophysical Properties of Thermal Barrier Coatings. Surf. Coat. Technol. 120-121:89-95
D.P. Hasselman, G.A. Merkel (1989) Specimen Size Effect of the Thermal Diffusivity/Conductivity of Aluminium Nitride. J. Am. Ceram. Soc. 72(6):967-971
H. Wang, R.D. Dinwiddie (2000) Reliability of Laser Flash Thermal Diffusivity Measurements of the Thermal Barrier Coatings. J. Therm. Spray Technol. 9(2):210-214
B. Hay, J.-R. Filtz, J. Hameury, L. Rongione (2005) Uncertainty of Thermal Diffusivity Measurements by Laser Flash Method. Int. J. Thermophys. 26(6):1883-1898
J. Carslaw, Heat Conduction in Solids, Clarendon Press, 1959
W.P. Parker, R.J. Jenkins, C.P. Butter, G.L. Abbott (1961) Flash Method of Determining Thermal Diffusivity Heat Capacity and Thermal Conductivity. J. Appl. Phys. 32:1679-1684
D.P. Almond, P.M. Patel (1996) Photothermal Science and Techniques. Chapman & Hall, London
R.E. Taylor and K.D. Maglic, Compendium of Thermophysical Property Measurement Methods Vol: 2: Recommended Measurement Techniques and Practices, K.D. Maglic, et al., Eds., Plenum Press, New York, 1992
S. Leigh, C.C. Berndt (1999) Quantitative Evaluation of Void Distributions within a Plasma-Sprayed Ceramic. J. Am. Ceram. Soc. 82(1):17-21
Siebert B., Funke C., Vassen R., Stoever D. (1999) Changes in Porosity and Young’s Modulus Due to Sintering of Plasma Sprayed Thermal Barrier Coatings. J. Mater. Process. Technol. 92-93:217-223
D. Basu, C. Funke, R.W. Steinbrech (1999) Effect of Heat Treatment on Elastic Properties of Separated Thermal Barrier Coatings. J. Mater Res. 14(12):4643-4650
R. McPherson, B.V. Shafer (1982) Interlamellar Contact within Plasma-Sprayed Coatings. Thin Solid Films 97:201-204
F. Cernuschi, P.G. Bison, S. Martinetti, and P. Scardi, Thermophysical, Mechanical and Microstructural Characterisation of Aged Free Standing Plasma Sprayed Zirconia Coatings, submitted to Acta Mater.
F. Cernuschi and P. G. Bison, unpublished results
Zhu D., Miller R.A. (2000) Thermal Conductivity and Elastic Modulus Evolution of Thermal Barrier Coatings Under High Heat Flux Conditions. J. Therm. Spray Technol. 9(2):175-180
Z. Wang, A. Kulkarni, S. Deshpande, T. Nakamura, H. Herman (2003) Effects of Pores and Interfaces on Effective Properties of Plasma Sprayed Zirconia Coatings. Acta Mater. 51:5319-5334
R. Mc Pherson (1984) A Model for Thermal Conductivity of Plasma Sprayed Ceramic Coatings. Thin Solid Films 112:89-95
Acknowledgments
This work has been financed by the Research Fund for the Italian Electrical System under the Contract Agreement between CESI RICERCA and the Ministry of Economic Development—General Directorate for Energy and Mining Resources stipulated on June 21 2007, in compliance with the Decree n.73 of June 18, 2007. The authors acknowledge Mr. L. Lorenzoni and Mr S. Capelli of CESI RICERCA for their technical support.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Cernuschi, F., Bison, P. The Influence of the Laser Energy on the Thermal Diffusivity Evaluation of TBC by Laser Flash. J Therm Spray Tech 17, 465–472 (2008). https://doi.org/10.1007/s11666-008-9199-8
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11666-008-9199-8