Abstract
Recently, new duplex surface treatments involving the use of pre-electroplating and pulsed plasma electrolytic nitrocarburizing (PPEN/C) have led to the possibility of using this material for applications usually typical for tool steels. In this work, we present results concerning the duplex treatment of pre-electroplating of Cr and PPEN/C of AISI 1020 mild steel. The samples were electroplated in a plating bath. After electroplating, the samples were nitrocarburized. The effects of time and applied voltage of PPEN/C process were discussed. The samples were characterized using scanning electron microscopy (SEM), atomic force microscopy (AFM), and microhardness testing. Electroplated layers of up to 100 μm were obtained. The subsequent PPEN/C increased the surface hardness to 1200 HV0.2 due to the formation of nitrides and carbides. Decreasing the size of nanocrystalline carbonitrides will lead to improvement of their wear resistance significantly.
Similar content being viewed by others
References
Sh. Ahangarani, F. Mahboubi, A.R. Sabour, Effects of Various Nitriding Parameters on Active Screen Plasma Nitriding Behavior of a Low-Alloy Steel, Vacuum, 2006, 80, 9, pp. 1032–1037
C. Palacio, A. Arranz, Synthesis of Ti–Cr–N Thin Films by Reactive Ion-Beam Mixing of Ti/Cr Interfaces, Surf. Sci., 2006, 600, 11, Pp. 2385–2391
M. Aliofkhazraei, A.S. Rouhaghdam, P. Taheri, Ch. Dehghanian, Systematic Study of Nanocrystalline Plasma Electrolytic Nitrocarburising of 316L Austenitic Stainless Steel for Corrosion Protection, J. Mater. Sci. Technol., 2007, 23, 5, 665–671
M. Aliofkhazraei, A.S. Rouhaghdam, and T. Shahrabi, Pulsed Nanocrystalline Plasma Electrolytic Carburising for Corrosion Protection of a γ-TiAl Alloy (Part 1: Effect of Frequency and Duty Cycle), J. Alloy. Compds., 2008, 460(1-2), p 614–618
G.F. Vander Voort, Metallography: Principles and Practice, McGraw-Hill, 1984, ISBN 0-07-066970-8
M. Aliofkhazraei, A.S. Rouhaghdam, M. Sabouri, Effect of Frequency and Duty Cycle on Corrosion Behavior of Pulsed Nanocrystalline Plasma Electrolytic Carbonitrided CP-Ti, J. Mater. Sci., 2008, 43, 1624–1629
Acknowledgment
This work was funded by Arvandan Oil and Gas Production Company (TMU 85-09-66) and National Association of Nanoscience and Nanotechnology of Iran.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Aliofkhazraei, M., Mofidi, S., Sabour Rouhaghdam, A. et al. Duplex Surface Treatment of Pre-Electroplating and Pulsed Nanocrystalline Plasma Electrolytic Carbonitriding of Mild Steel. J Therm Spray Tech 17, 323–328 (2008). https://doi.org/10.1007/s11666-008-9179-z
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11666-008-9179-z