Abstract
The precipitation of secondary phases, the austenite grain growth and their effects on the mechanical properties of the HR3C heat-resistant steel in long-term service at 605 °C in an ultra-supercritical power generation unit were investigated. The results show that during the service period of the HR3C steel, the precipitation of M23C6 (M=Cr, Fe, Ni and Mo) follows the Kurdjumov–Sachs orientation relationship. Polygonal M23C6 particles preferentially precipitate and continuously distribute at the austenite grain boundaries. Meanwhile, the nanoscale NbCrN particles precipitate on the dislocations in the austenite grains. The austenite grain growth occurs in three stages with a growth exponent of 5.92 in the third stage, indicating that it is strongly restrained by the precipitates. In the as-served HR3C steel, the precipitation of the secondary phases, rather than the austenite grain growth, results in the strong improvement of the strength and hardness, albeit at the expense of a clear degradation of the toughness and plasticity.
Similar content being viewed by others
References
C.Z. Zhu, Y. Yuan, J.M. Bai, P. Zhang, J.B. Yan, C.Y. You and Y.F. Gu, Impact Toughness of A Modified HR3C Austenitic Steel after Long-term Thermal Exposure at 650 °C, Mater. Sci. Eng. A, 2019, 740-741, p 71–81.
J.M. Bai, Y. Yuan, P. Zhang, C.Z. Zhu, J.B. Yan and C.Y. You, Effect of Co on the Microstructure Evolution of Modified HR3C Austenitic Heat-resistant Steels during Long-term Ageing, Mater. High. Temp., 2019, 36, p 344–353.
A. Iseda, H. Okada, H. Semba and M. Igarashi, Long Term Creep Properties and Microstructure of Super304H, TP347HFG and HR3C for A-USC Boilers, Energy Mater Mater. Sci., 2007, 2, p 199–206.
B.C. Peng, H.X. Zhang and J. Hong, Effect of Aging on the Impact Toughness of 25Cr-20Ni-Nb-N Steel, Mater. Sci. Eng. A, 2010, 527, p 1957–1961.
X.L. Bai, J.D. Pan, G.H. Chen, J.J. Liu, J. Wang, T. Zhang and W.M. Tang, Effect of High Temperature Aging on Microstructure and Mechanical Properties of HR3C Heat Resistant Steel, Mater. Sci. Technol., 2014, 30, p 205–210.
A. Zieliński, G. Golański and M. Sroka, Evolution of the Microstructure and Mechanical Properties of HR3C Austenitic Stainless Steel after Ageing for up to 30,000 h at 650-750 °C, Mater. Sci. Eng. A, 2020, 796, p 139944.
H. Okada, M. Igarashi, S. Yamamoto, O. Miyahara, A. Iseda, N. Komai, and F. Masuyama, Long-term Service Experience with Advanced Austenitic Alloys in Eddystone Power Station, In: Proceedings of the ASME 2007 Pressure Vessels and Piping Conference, San Antonio, Texas, USA, 2007, p181–188
J.E. Burke and D. Turnbull, Recrystallization and Grain Growth, Prog. Met. Phys., 1952, 3, p 1–292.
V.V. Gubernatorov, L.R. Vladimirov, T.S. Sycheva and A.I. Pyatygin, On the Structure Formation in Polycrystalline Metals and Alloys, I: Thermocycling, Phys. Met. Metallogr., 2006, 101, p 280–284.
B. Wang, Z.C. Liu, S.C. Cheng, C.M. Liu and J.Z. Wang, Microstructure Evolution and Mechanical Properties of HR3C Steel during Long-term Aging at High Temperature, J. Iron Steel Res. Int., 2014, 8, p 765–773.
Y.H. Zhou, Y.M. Li, Y.C. Liu, Q.Y. Guo, C.X. Liu, L.M. Yu, C. Li and H.J. Li, Precipitation Behavior of Type 347H Heat-resistant Austenitic Steel during Long-term High-temperature Aging, J. Mater. Res., 2015, 30, p 3642–3652.
K.H. Lee, S.M. Hong, J.H. Shim, J.Y. Suh, J.Y. Huh and W.S. Jung, Effect of Nb Addition on Z-phase Formation and Creep Strength in High-Cr Martensitic Heat-resistant Steels, Mater. Charact., 2015, 102, p 79–84.
H.U. Hong, B.S. Rho and S.W. Nam, Correlation of the M23C6 Precipitation Morphology with Grain Boundary Characteristics in Austenitic Stainless Steel, Mater. Sci. Eng. A, 2001, 318, p 285–292.
Z. Zhang, Z.F. Hu, H.Y. Tu, S.F. Schmauder and G.X. Wu, Microstructure Evolution in HR3C Austenitic Steel during Long-term Creep at 650 °C, Mater. Sci. Eng. A., 2016, 681, p 74–84.
H.Y. Bi, Z.J. Wang, M. Shimada and H. Kokama, Electron Microscopic Observation of Grain Boundary in Thermomechanical Processed SUS304 Stainless Steel, Mater. Lett., 2003, 57, p 2803–2806.
W. Wei, Z. Wang, W. Li, T. Jing, W. Zhong and J. Lin, Evolution of M23C6 Phase in HR3C Steel Aged at 650 °C, Mater. High. Temp., 2016, 33, p 276–282.
R. Jones, V. Randle and G. Owen, Carbide Precipitation and Grain Boundary Plane Selection in Overaged Type 316 Austenitic Stainless Steel, Mater. Sci. Eng. A., 2008, 496, p 256–261.
V.T. Ha and W.S. Jung, Evolution of Precipitate Phases during Long-term Isothermal Aging at 1083K (810 °C) in A New Precipitation-strengthened Heat-resistant Austenitic Stainless Steel, Metall. Mater. Trans. A., 2012, 43, p 3366–3378.
G. Golański, C. Kolan and A. Zieliński, Microstructure and Mechanical Properties of HR3C Austenitic Steel after Service, Arch. Mater. Sci. Eng., 2016, 81, p 62–67.
J. Wang, H. Zou, C. Li, Y.H. Peng, S.Y. Qiu and B.L. Shen, The Microstructure Evolution of Type 17-4PH Stainless Steel during Long-term Aging at 350 °C, Nucl. Eng. Des., 2006, 236, p 2531–2536.
C.M. Sellars and J.A. Whiteman, Recrystallization and Grain Growth in Hot Rolling, Met. Sci., 1979, 13, p 187–194.
S.S. Zhang, M.Q. Li, Y.G. Liu, J. Luo and T.Q. Liu, The Growth Behavior of Austenite Grain in the Heating Process of 300M Steel, Mater. Sci. Eng. A., 2011, 528, p 4967–4972.
L.Z. Han, R.K. Chen and J.F. Gu, Behavior of Austenite Grain Growth in X12CrMoWVNbN10-1-1 Ferrite Heat-resistant Steel, Acta Metall. Sin., 2009, 12, p 1446–1450.
A. Zieliński, J. Dobrzański, H. Purzyńska and G. Golański, Properties, Structure and Creep Resistance of Austenitic Steel Super304H, Mater. Testing, 2015, 57, p 859–865.
E.N. Borodin, A.E. Mayer, Y.V. Petrov and A.A. Gruzdkov, Maximum Yield Strength under Quasi-static and High-rate Plastic Deformation of Metals, Phys. Solid State, 2014, 56, p 2470–2479.
Acknowledgments
This work was supported by the Anhui Xinli Electric Technology Consulting Co. Ltd. under Grant Number 2016Zi-CL-01.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Wang, R., Duan, M., Zhang, J. et al. Microstructure Characteristics and Their Effects on the Mechanical Properties of As-Served HR3C Heat-Resistant Steel. J. of Materi Eng and Perform 30, 4552–4561 (2021). https://doi.org/10.1007/s11665-021-05754-9
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11665-021-05754-9