Abstract
The maximum shear strain and the normal strain excursion on the critical plane are regarded as the primary parameters of the crack driving force to establish a new short crack model in this paper. An equivalent strain-based intensity factor is proposed to correlate the short crack growth rate under multiaxial loading. According to the short crack model, a new method is proposed for multiaxial fatigue life prediction based on crack growth analysis. It is demonstrated that the method can be used under proportional and non-proportional loadings. The predicted results showed a good agreement with experimental lives in both high-cycle and low-cycle regions.
Similar content being viewed by others
Reference
S. Suresh and R.O. Ritchie, Propagation of Short Fatigue Cracks, Int. Met. Rev., 1984, 29, p 445–475
C. Santus and D. Taylor, Physically Short Crack Propagation in Metals During High Cycle Fatigue, Int. J. Fatigue, 2009, 31, p 1356–1365
S. Pearson, Initiation of Fatigue Cracks in Commercial Aluminum Alloys and the Subsequent Propagation of Very Short Cracks, Eng. Fract. Mech., 1975, 7, p 235–247
A. Fatemi and N. Shamsaei, Multiaxial Fatigue: An Overview and Some Approximation Models for Life Estimation, Int. J. Fatigue, 2011, 33, p 948–958
D.F. Socie, C.T. Hua, and D.W. Worthem, Mixed Mode Small Crack Growth, Fatigue Fract. Eng. Mater. Struct., 1987, 10, p 1–16
S.C. Reddy and A. Fatemi, Small Crack Growth in Multiaxial Fatigue, ASTM STP., 1992, 1122, p 276–298
A. Fatemi and D.F. Socie, A Critical Plane Approach to Multiaxial Fatigue Damage Including Out-of-Phase Loading, Fatigue Fract. Eng. Mater. Struct., 1988, 11, p 149–165
N. Shamsaei and A. Fatemi, Small Fatigue Crack Growth Under Multiaxial Stresses, Int. J. Fatigue, 2014, 58, p 126–135
T. Hoshide and D.F. Socie, Crack Nucleation and Growth Modeling in Biaxial Fatigue, Eng. Fract. Mech., 1988, 29, p 287–299
D.L. McDowell, Multiaxial Small Fatigue Crack Growth in Metals, Int. J. Fatigue, 1997, 19, p 127–135
R. Döring, J. Hoffmeyer, and T. Seeger, Short Fatigue Crack Growth Under Nonproportional Multiaxial Elastic-Plastic Strains, Int. J. Fatigue, 2006, 2, p 8972–8982
O. Hertel and M. Vormwald, Short-Crack-Growth-Based Fatigue Assessment of Notched Components Under Multiaxial Variable Amplitude Loading, Eng. Fract. Mech., 2011, 78, p 1614–1627
M. Vormwald and O. Hertel, Short Crack Approach for Multiaxial Fatigue Assessment, Mater. Werkst., 2008, 39(10), p 702–710
O. Hertel and M. Vormwald, Multiaxial Fatigue Assessment Based on a Short Crack Growth Concept, Theor. Appl. Fract. Mech., 2014, 73, p 17–26
C.H. Wang and M.W. Brown, A Path-Independent Parameter for Fatigue Under Proportional and Non-proportional Loading, Fatigue Fract. Eng. Mater. Struct., 1993, 16, p 1285–1297
D.G. Shang and D.J. Wang, A New Multiaxial Fatigue Damage Model Based on the Critical Plane Approach, Int. J. Fatigue, 1998, 20, p 241–245
D.G. Shang, G.Q. Sun, and J. Deng, Multiaxial Fatigue Damage Parameter and Life Prediction for Medium-Carbon Steel Based On the Critical Plane Approach, Int. J. Fatigue, 2007, 29, p 2200–2207
N.E. Dowling, Growth of Short Cracks in an Alloy Steel, Paper. 82-1D7-STINE-P1, Westinghouse Res. Lab., 1982
T.A. Beer, Report UIUC-ENG 84-3606, University of Illinois at Urbana-Champaign, Illinois, 1984
G.R. Irwin, The Crack Extension Force for a Part-Through Crack in a Plate, J. Appl. Mech. Trans. ASME, 1962, 29, p 651–654
P.C. Paris and F. Erdogn, A Critical Analysis of Crack Propagation Laws, J. Basic Eng., 1963, 85, p 528–534
C.T. Hua, Fatigue Damage and Small Crack Growth During Biaxial Loading, Ph.D. Dissertation. University of Illinois at Urbana-Champaign, 1984
ASTM Standard E647, Standard Test Method for Measurement of Fatigue Crack Growth Rates, 2002
K. Tanaka, Y. Nakai, and M. Yamashita, Fatigue Growth Threshold of Small Cracks, Int. J. Fract., 1981, 17, p 519–533
J. Lankford, The Growth of Small Fatigue Cracks in 7075-T6 Aluminum, Fatigue Fract. Eng. Mater. Struct., 1982, 5, p 233–248
Z.X. Wu, Investigation of Fatigue Damage Process and Short Fatigue Cracks Behaviour in Medium Carbon Steels, Ph.D. Dissertation. Northeastern University, Shenyang, 1996
M.H. El Haddad, T.H. Topper, and K.N. Smith, Prediction of Nonpropagating Cracks, Eng. Fract. Mech., 1979, 11, p 573–584
H. Kitagawa and S. Takahashi, Applicability of Fracture Mechanics to Very Small Cracks or the Cracks in the Early Stage, in Proceedings of the 2nd International Conference on Mechanical Behavior of Materials, ASM International, 1976, p 627–631
K.J. Miller, The Two Thresholds of Fatigue Behaviour, Fatigue Fract. Eng. Mater. Struct., 1993, 16, p 931–939
M.D. Chapetti, Fatigue Propagation Threshold of Short Cracks Under Constant Amplitude Loading, Int. J. Fatigue, 2003, 25, p 1319–1326
D.S. Dugdale, Yielding of Steel Sheets Containing Slits, J. Mech. Phys. Solids, 1960, 8, p 100–104
Z. Lu, Y. Xiang, and Y. Liu, Crack Growth-Based Fatigue-Life Prediction Using an Equivalent Initial Flaw Model. Part II: Multiaxial Loading, Int. J. Fatigue, 2010, 32, p 376–381
J.L. Koch, Proportional and Non-proportional Biaxial Fatigue of Inconel 718. M.S. Thesis, University of Illinois at Urbana-Champaign, 1985
J. Park, D. Nelson, and A. Rostami, Small Crack Growth in Combined Bending-Torsion Fatigue of A533B Steel, Fatigue Fract. Eng. Mater. Struct., 2001, 24, p 179–191
Acknowledgments
The authors gratefully acknowledge the financial support of the National Natural Science Foundation of China (51535001, 11572008) and the Specialized Research Fund for the Doctoral Program of Higher Education (No. 20131103120024).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Zhao, XF., Shang, DG., Sun, YJ. et al. Multiaxial Fatigue Life Prediction Based on Short Crack Propagation Model with Equivalent Strain Parameter. J. of Materi Eng and Perform 27, 324–332 (2018). https://doi.org/10.1007/s11665-017-3075-y
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11665-017-3075-y